Struct stm32h7::stm32h743v::dma2d::cr::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn start(&self) -> STARTR

Bit 0 - Start This bit can be used to launch the DMA2D according to the parameters loaded in the various configuration registers

pub fn susp(&self) -> SUSPR

Bit 1 - Suspend This bit can be used to suspend the current transfer. This bit is set and reset by software. It is automatically reset by hardware when the START bit is reset.

pub fn abort(&self) -> ABORTR

Bit 2 - Abort This bit can be used to abort the current transfer. This bit is set by software and is automatically reset by hardware when the START bit is reset.

pub fn teie(&self) -> TEIER

Bit 8 - Transfer error interrupt enable This bit is set and cleared by software.

pub fn tcie(&self) -> TCIER

Bit 9 - Transfer complete interrupt enable This bit is set and cleared by software.

pub fn twie(&self) -> TWIER

Bit 10 - Transfer watermark interrupt enable This bit is set and cleared by software.

pub fn caeie(&self) -> CAEIER

Bit 11 - CLUT access error interrupt enable This bit is set and cleared by software.

pub fn ctcie(&self) -> CTCIER

Bit 12 - CLUT transfer complete interrupt enable This bit is set and cleared by software.

pub fn ceie(&self) -> CEIER

Bit 13 - Configuration Error Interrupt Enable This bit is set and cleared by software.

pub fn mode(&self) -> MODER

Bits 16:17 - DMA2D mode This bit is set and cleared by software. It cannot be modified while a transfer is ongoing.