Struct stm32h7::stm32h743v::rtc::tampcr::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn tamp1e(&self) -> TAMP1ER

Bit 0 - RTC_TAMP1 input detection enable

pub fn tamp1trg(&self) -> TAMP1TRGR

Bit 1 - Active level for RTC_TAMP1 input If TAMPFLT != 00 if TAMPFLT = 00:

pub fn tampie(&self) -> TAMPIER

Bit 2 - Tamper interrupt enable

pub fn tamp2e(&self) -> TAMP2ER

Bit 3 - RTC_TAMP2 input detection enable

pub fn tamp2trg(&self) -> TAMP2TRGR

Bit 4 - Active level for RTC_TAMP2 input if TAMPFLT != 00: if TAMPFLT = 00:

pub fn tamp3e(&self) -> TAMP3ER

Bit 5 - RTC_TAMP3 detection enable

pub fn tamp3trg(&self) -> TAMP3TRGR

Bit 6 - Active level for RTC_TAMP3 input if TAMPFLT != 00: if TAMPFLT = 00:

pub fn tampts(&self) -> TAMPTSR

Bit 7 - Activate timestamp on tamper detection event TAMPTS is valid even if TSE=0 in the RTC_CR register.

pub fn tampfreq(&self) -> TAMPFREQR

Bits 8:10 - Tamper sampling frequency Determines the frequency at which each of the RTC_TAMPx inputs are sampled.

pub fn tampflt(&self) -> TAMPFLTR

Bits 11:12 - RTC_TAMPx filter count These bits determines the number of consecutive samples at the specified level (TAMP*TRG) needed to activate a Tamper event. TAMPFLT is valid for each of the RTC_TAMPx inputs.

pub fn tampprch(&self) -> TAMPPRCHR

Bits 13:14 - RTC_TAMPx precharge duration These bit determines the duration of time during which the pull-up/is activated before each sample. TAMPPRCH is valid for each of the RTC_TAMPx inputs.

pub fn tamppudis(&self) -> TAMPPUDISR

Bit 15 - RTC_TAMPx pull-up disable This bit determines if each of the RTC_TAMPx pins are pre-charged before each sample.

pub fn tamp1ie(&self) -> TAMP1IER

Bit 16 - Tamper 1 interrupt enable

pub fn tamp1noerase(&self) -> TAMP1NOERASER

Bit 17 - Tamper 1 no erase

pub fn tamp1mf(&self) -> TAMP1MFR

Bit 18 - Tamper 1 mask flag

pub fn tamp2ie(&self) -> TAMP2IER

Bit 19 - Tamper 2 interrupt enable

pub fn tamp2noerase(&self) -> TAMP2NOERASER

Bit 20 - Tamper 2 no erase

pub fn tamp2mf(&self) -> TAMP2MFR

Bit 21 - Tamper 2 mask flag

pub fn tamp3ie(&self) -> TAMP3IER

Bit 22 - Tamper 3 interrupt enable

pub fn tamp3noerase(&self) -> TAMP3NOERASER

Bit 23 - Tamper 3 no erase

pub fn tamp3mf(&self) -> TAMP3MFR

Bit 24 - Tamper 3 mask flag