Struct stm32h7::stm32h743v::dma2d::isr::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn teif(&self) -> TEIFR

Bit 0 - Transfer error interrupt flag This bit is set when an error occurs during a DMA transfer (data transfer or automatic CLUT loading).

pub fn tcif(&self) -> TCIFR

Bit 1 - Transfer complete interrupt flag This bit is set when a DMA2D transfer operation is complete (data transfer only).

pub fn twif(&self) -> TWIFR

Bit 2 - Transfer watermark interrupt flag This bit is set when the last pixel of the watermarked line has been transferred.

pub fn caeif(&self) -> CAEIFR

Bit 3 - CLUT access error interrupt flag This bit is set when the CPU accesses the CLUT while the CLUT is being automatically copied from a system memory to the internal DMA2D.

pub fn ctcif(&self) -> CTCIFR

Bit 4 - CLUT transfer complete interrupt flag This bit is set when the CLUT copy from a system memory area to the internal DMA2D memory is complete.

pub fn ceif(&self) -> CEIFR

Bit 5 - Configuration error interrupt flag This bit is set when the START bit of DMA2D_CR, DMA2DFGPFCCR or DMA2D_BGPFCCR is set and a wrong configuration has been programmed.