[−][src]Struct stm32h7::stm32h743::pwr::wkupfr::W
Value to write to the register
Methods
impl W
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn wkupf1(&mut self) -> _WKUPF1W
[src]
Bit 0 - Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR).
pub fn wkupf2(&mut self) -> _WKUPF2W
[src]
Bit 1 - Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR).
pub fn wkupf3(&mut self) -> _WKUPF3W
[src]
Bit 2 - Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR).
pub fn wkupf4(&mut self) -> _WKUPF4W
[src]
Bit 3 - Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR).
pub fn wkupf5(&mut self) -> _WKUPF5W
[src]
Bit 4 - Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR).
pub fn wkupf6(&mut self) -> _WKUPF6W
[src]
Bit 5 - Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR).
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self