[−][src]Struct stm32h7::stm32h743::mdma::c12isr::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn teif12(&self) -> TEIF12R
[src]
Bit 0 - Channel x transfer error interrupt flag This bit is set by hardware. It is cleared by software writing 1 to the corresponding bit in the DMA_IFCRy register.
pub fn ctcif12(&self) -> CTCIF12R
[src]
Bit 1 - Channel x Channel Transfer Complete interrupt flag This bit is set by hardware. It is cleared by software writing 1 to the corresponding bit in the DMA_IFCRy register. CTC is set when the last block was transferred and the channel has been automatically disabled. CTC is also set when the channel is suspended, as a result of writing EN bit to 0.
pub fn brtif12(&self) -> BRTIF12R
[src]
Bit 2 - Channel x block repeat transfer complete interrupt flag This bit is set by hardware. It is cleared by software writing 1 to the corresponding bit in the DMA_IFCRy register.
pub fn btif12(&self) -> BTIF12R
[src]
Bit 3 - Channel x block transfer complete interrupt flag This bit is set by hardware. It is cleared by software writing 1 to the corresponding bit in the DMA_IFCRy register.
pub fn tcif12(&self) -> TCIF12R
[src]
Bit 4 - channel x buffer transfer complete
pub fn crqa12(&self) -> CRQA12R
[src]
Bit 16 - channel x request active flag
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self