[−][src]Struct stm32h7::stm32h743::flash::cr2::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn lock2(&self) -> LOCK2R
[src]
Bit 0 - Bank 2 configuration lock bit
pub fn pg2(&self) -> PG2R
[src]
Bit 1 - Bank 2 program enable bit
pub fn ser2(&self) -> SER2R
[src]
Bit 2 - Bank 2 sector erase request
pub fn ber2(&self) -> BER2R
[src]
Bit 3 - Bank 2 erase request
pub fn psize2(&self) -> PSIZE2R
[src]
Bits 4:5 - Bank 2 program size
pub fn fw2(&self) -> FW2R
[src]
Bit 6 - Bank 2 write forcing control bit
pub fn start2(&self) -> START2R
[src]
Bit 7 - Bank 2 bank or sector erase start control bit
pub fn snb2(&self) -> SNB2R
[src]
Bits 8:10 - Bank 2 sector erase selection number
pub fn crc_en(&self) -> CRC_ENR
[src]
Bit 15 - Bank 2 CRC control bit
pub fn eopie2(&self) -> EOPIE2R
[src]
Bit 16 - Bank 2 end-of-program interrupt control bit
pub fn wrperrie2(&self) -> WRPERRIE2R
[src]
Bit 17 - Bank 2 write protection error interrupt enable bit
pub fn pgserrie2(&self) -> PGSERRIE2R
[src]
Bit 18 - Bank 2 programming sequence error interrupt enable bit
pub fn strberrie2(&self) -> STRBERRIE2R
[src]
Bit 19 - Bank 2 strobe error interrupt enable bit
pub fn incerrie2(&self) -> INCERRIE2R
[src]
Bit 21 - Bank 2 inconsistency error interrupt enable bit
pub fn operrie2(&self) -> OPERRIE2R
[src]
Bit 22 - Bank 2 write/erase error interrupt enable bit
pub fn rdperrie2(&self) -> RDPERRIE2R
[src]
Bit 23 - Bank 2 read protection error interrupt enable bit
pub fn rdserrie2(&self) -> RDSERRIE2R
[src]
Bit 24 - Bank 2 secure error interrupt enable bit
pub fn sneccerrie2(&self) -> SNECCERRIE2R
[src]
Bit 25 - Bank 2 ECC single correction error interrupt enable bit
pub fn dbeccerrie2(&self) -> DBECCERRIE2R
[src]
Bit 26 - Bank 2 ECC double detection error interrupt enable bit
pub fn crcendie2(&self) -> CRCENDIE2R
[src]
Bit 27 - Bank 2 end of CRC calculation interrupt enable bit
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self