Module timeoutr 

I2C timeout register

Structs

TIMEOUTRrs

I2C timeout register

Enums

TEXTEN

Extended clock timeout enable

TIDLE

Idle clock timeout detection Note: This bit can be written only when TIMOUTEN=0.

TIMOUTEN

Clock timeout enable

Type Aliases

R

Register TIMEOUTR reader

TEXTEN_R

Field TEXTEN reader - Extended clock timeout enable

TEXTEN_W

Field TEXTEN writer - Extended clock timeout enable

TIDLE_R

Field TIDLE reader - Idle clock timeout detection Note: This bit can be written only when TIMOUTEN=0.

TIDLE_W

Field TIDLE writer - Idle clock timeout detection Note: This bit can be written only when TIMOUTEN=0.

TIMEOUTA_R

Field TIMEOUTA reader - Bus Timeout A This field is used to configure: The SCL low timeout condition tTIMEOUT when TIDLE=0 tTIMEOUT= (TIMEOUTA+1) x 2048 x tI2CCLK The bus idle condition (both SCL and SDA high) when TIDLE=1 tIDLE= (TIMEOUTA+1) x 4 x tI2CCLK Note: These bits can be written only when TIMOUTEN=0.

TIMEOUTA_W

Field TIMEOUTA writer - Bus Timeout A This field is used to configure: The SCL low timeout condition tTIMEOUT when TIDLE=0 tTIMEOUT= (TIMEOUTA+1) x 2048 x tI2CCLK The bus idle condition (both SCL and SDA high) when TIDLE=1 tIDLE= (TIMEOUTA+1) x 4 x tI2CCLK Note: These bits can be written only when TIMOUTEN=0.

TIMEOUTB_R

Field TIMEOUTB reader - Bus timeout B This field is used to configure the cumulative clock extension timeout: In master mode, the master cumulative clock low extend time (tLOW:MEXT) is detected In slave mode, the slave cumulative clock low extend time (tLOW:SEXT) is detected tLOW:EXT= (TIMEOUTB+1) x 2048 x tI2CCLK Note: These bits can be written only when TEXTEN=0.

TIMEOUTB_W

Field TIMEOUTB writer - Bus timeout B This field is used to configure the cumulative clock extension timeout: In master mode, the master cumulative clock low extend time (tLOW:MEXT) is detected In slave mode, the slave cumulative clock low extend time (tLOW:SEXT) is detected tLOW:EXT= (TIMEOUTB+1) x 2048 x tI2CCLK Note: These bits can be written only when TEXTEN=0.

TIMOUTEN_R

Field TIMOUTEN reader - Clock timeout enable

TIMOUTEN_W

Field TIMOUTEN writer - Clock timeout enable

W

Register TIMEOUTR writer