Module vrefbuf_csr 

VREFBUF control and status register

Structs

ENVR_R

Field ENVR reader - Voltage reference buffer mode enable This bit is used to enable the voltage reference buffer mode.

ENVR_W

Field ENVR writer - Voltage reference buffer mode enable This bit is used to enable the voltage reference buffer mode.

HIZ_R

Field HIZ reader - High impedance mode This bit controls the analog switch to connect or not the VREF+ pin. Refer to Table196: VREF buffer modes for the mode descriptions depending on ENVR bit configuration.

HIZ_W

Field HIZ writer - High impedance mode This bit controls the analog switch to connect or not the VREF+ pin. Refer to Table196: VREF buffer modes for the mode descriptions depending on ENVR bit configuration.

R

Register VREFBUF_CSR reader

VREFBUF_CSR_SPEC

VREFBUF control and status register

VRR_R

Field VRR reader - Voltage reference buffer ready

VRS_R

Field VRS reader - Voltage reference scale These bits select the value generated by the voltage reference buffer. Other: Reserved

VRS_W

Field VRS writer - Voltage reference scale These bits select the value generated by the voltage reference buffer. Other: Reserved

W

Register VREFBUF_CSR writer