Struct TXSOM_R 

pub struct TXSOM_R(/* private fields */);

Field TXSOM reader - Tx Start Of Message TXSOM is set by software to command transmission of the first byte of a CEC message. If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. Start-Bit is effectively started on the CEC line after SFT is counted. If TXSOM is set while a message reception is ongoing, transmission will start after the end of reception. TXSOM is cleared by hardware after the last byte of the message is sent with a positive acknowledge (TXEND=1), in case of transmission underrun (TXUDR=1), negative acknowledge (TXACKE=1), and transmission error (TXERR=1). It is also cleared by CECEN=0. It is not cleared and transmission is automatically retried in case of arbitration lost (ARBLST=1). TXSOM can be also used as a status bit informing application whether any transmission request is pending or under execution. The application can abort a transmission request at any time by clearing the CECEN bit. Note: TXSOM must be set when CECEN=1 TXSOM must be set when transmission data is available into TXDR HEADERs first four bits containing own peripheral address are taken from TXDR[7:4], not from CEC_CFGR.OAR which is used only for reception

Methods from Deref<Target = FieldReader<bool, bool>>

pub fn bits(&self) -> U

Reads raw bits from field.

pub fn bit(&self) -> bool

Value of the field as raw bits.

pub fn bit_is_clear(&self) -> bool

Returns true if the bit is clear (0).

pub fn bit_is_set(&self) -> bool

Returns true if the bit is set (1).

Trait Implementations

impl Deref for TXSOM_R

type Target = FieldReader<bool, bool>

The resulting type after dereferencing.

fn deref(&self) -> &<TXSOM_R as Deref>::Target

Dereferences the value.