Struct stm32g0::stm32g0c1::tim1::ccmr1_input::R

pub struct R(_);

Register CCMR1_Input reader

Implementations

impl R

pub fn cc1s(&self) -> CC1S_R

Bits 0:1 - Capture/Compare 1 Selection This bit-field defines the direction of the channel (input/output) as well as the used input. Note: CC1S bits are writable only when the channel is OFF (CC1E = ’0’ in TIMx_CCER).

pub fn ic1psc(&self) -> IC1PSC_R

Bits 2:3 - Input capture 1 prescaler This bit-field defines the ratio of the prescaler acting on CC1 input (IC1). The prescaler is reset as soon as CC1E=’0’ (TIMx_CCER register).

pub fn ic1f(&self) -> IC1F_R

Bits 4:7 - Input capture 1 filter This bit-field defines the frequency used to sample TI1 input and the length of the digital filter applied to TI1. The digital filter is made of an event counter in which N consecutive events are needed to validate a transition on the output:

pub fn cc2s(&self) -> CC2S_R

Bits 8:9 - Capture/Compare 2 selection This bit-field defines the direction of the channel (input/output) as well as the used input. Note: CC2S bits are writable only when the channel is OFF (CC2E = ’0’ in TIMx_CCER).

pub fn ic2psc(&self) -> IC2PSC_R

Bits 10:11 - Input capture 2 prescaler Refer to IC1PSC[1:0] description.

pub fn ic2f(&self) -> IC2F_R

Bits 12:15 - Input capture 2 filter Refer to IC1F[3:0] description.

Methods from Deref<Target = R<CCMR1_INPUT_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<CCMR1_INPUT_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<CCMR1_INPUT_SPEC>> for R

fn from(reader: R<CCMR1_INPUT_SPEC>) -> Self

Converts to this type from the input type.