Struct stm32g0::stm32g0c1::tim1::af1::R

pub struct R(_);

Register AF1 reader

Implementations

impl R

pub fn bkine(&self) -> BKINE_R

Bit 0 - BRK BKIN input enable This bit enables the BKIN alternate function input for the timer’s BRK input. BKIN input is ’ORed’ with the other BRK sources. Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

pub fn bkcmp1e(&self) -> BKCMP1E_R

Bit 1 - BRK COMP1 enable This bit enables the COMP1 for the timer’s BRK input. COMP1 output is ’ORed’ with the other BRK sources. Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

pub fn bkcmp2e(&self) -> BKCMP2E_R

Bit 2 - BRK COMP2 enable This bit enables the COMP2 for the timer’s BRK input. COMP2 output is ’ORed’ with the other BRK sources. Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

pub fn bkinp(&self) -> BKINP_R

Bit 9 - BRK BKIN input polarity This bit selects the BKIN alternate function input sensitivity. It must be programmed together with the BKP polarity bit. Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

pub fn bkcmp1p(&self) -> BKCMP1P_R

Bit 10 - BRK COMP1 input polarity This bit selects the COMP1 input sensitivity. It must be programmed together with the BKP polarity bit. Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

pub fn bkcmp2p(&self) -> BKCMP2P_R

Bit 11 - BRK COMP2 input polarity This bit selects the COMP2 input sensitivity. It must be programmed together with the BKP polarity bit. Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

pub fn etrsel(&self) -> ETRSEL_R

Bits 14:17 - ETR source selection These bits select the ETR input source. Others: Reserved Note: These bits can not be modified as long as LOCK level 1 has been programmed (LOCK bits in TIMx_BDTR register).

Methods from Deref<Target = R<AF1_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<AF1_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<AF1_SPEC>> for R

fn from(reader: R<AF1_SPEC>) -> Self

Converts to this type from the input type.