Module comp2_csr

Comparator 2 control and status register

Structs

COMP2_CSRrs

Comparator 2 control and status register

Type Aliases

BLANKSEL_R

Field BLANKSEL reader - Comparator 2 blanking source selector This bitfield is controlled by software (if not locked). It selects the blanking source: xxxx1: TIM1 OC4 xxx1x: TIM1 OC5 xx1xx: TIM2 OC3 x1xxx: TIM3 OC3 1xxxx: TIM15 OC2

BLANKSEL_W

Field BLANKSEL writer - Comparator 2 blanking source selector This bitfield is controlled by software (if not locked). It selects the blanking source: xxxx1: TIM1 OC4 xxx1x: TIM1 OC5 xx1xx: TIM2 OC3 x1xxx: TIM3 OC3 1xxxx: TIM15 OC2

EN_R

Field EN reader - Comparator 2 enable bit This bit is controlled by software (if not locked). It enables the comparator 2:

EN_W

Field EN writer - Comparator 2 enable bit This bit is controlled by software (if not locked). It enables the comparator 2:

HYST_R

Field HYST reader - Comparator 2 hysteresis selector This bitfield is controlled by software (if not locked). It selects the hysteresis of the comparator 2:

HYST_W

Field HYST writer - Comparator 2 hysteresis selector This bitfield is controlled by software (if not locked). It selects the hysteresis of the comparator 2:

INMSEL_R

Field INMSEL reader - Comparator 2 signal selector for inverting input INM This bitfield is controlled by software (if not locked). It selects the signal for the inverting input COMP2_INM of the comparator 2: > 1000: 1/4 VREFINT

INMSEL_W

Field INMSEL writer - Comparator 2 signal selector for inverting input INM This bitfield is controlled by software (if not locked). It selects the signal for the inverting input COMP2_INM of the comparator 2: > 1000: 1/4 VREFINT

INPSEL_R

Field INPSEL reader - Comparator 2 signal selector for non-inverting input This bitfield is controlled by software (if not locked). It selects the signal for the non-inverting input COMP2_INP of the comparator 2 (also see the WINMODE bit):

INPSEL_W

Field INPSEL writer - Comparator 2 signal selector for non-inverting input This bitfield is controlled by software (if not locked). It selects the signal for the non-inverting input COMP2_INP of the comparator 2 (also see the WINMODE bit):

LOCK_R

Field LOCK reader - COMP2_CSR register lock This bit is set by software and cleared by a system reset. It locks the whole content of the comparator 2 control register COMP2_CSR[31:0]:

LOCK_W

Field LOCK writer - COMP2_CSR register lock This bit is set by software and cleared by a system reset. It locks the whole content of the comparator 2 control register COMP2_CSR[31:0]:

POLARITY_R

Field POLARITY reader - Comparator 2 polarity selector This bit is controlled by software (if not locked). It selects the comparator 2 output polarity:

POLARITY_W

Field POLARITY writer - Comparator 2 polarity selector This bit is controlled by software (if not locked). It selects the comparator 2 output polarity:

PWRMODE_R

Field PWRMODE reader - Comparator 2 power mode selector This bitfield is controlled by software (if not locked). It selects the power consumption and as a consequence the speed of the comparator 2: others: Reserved

PWRMODE_W

Field PWRMODE writer - Comparator 2 power mode selector This bitfield is controlled by software (if not locked). It selects the power consumption and as a consequence the speed of the comparator 2: others: Reserved

R

Register COMP2_CSR reader

VALUE_R

Field VALUE reader - Comparator 2 output status This bit is read-only. It reflects the level of the comparator 2 output after the polarity selector and blanking, as indicated in .

W

Register COMP2_CSR writer

WINMODE_R

Field WINMODE reader - Comparator 2 non-inverting input selector for window mode This bit is controlled by software (if not locked). It selects the signal for COMP2_INP input of the comparator 2:

WINMODE_W

Field WINMODE writer - Comparator 2 non-inverting input selector for window mode This bit is controlled by software (if not locked). It selects the signal for COMP2_INP input of the comparator 2:

WINOUT_R

Field WINOUT reader - Comparator 2 output selector This bit is controlled by software (if not locked). It selects the comparator 2 output:

WINOUT_W

Field WINOUT writer - Comparator 2 output selector This bit is controlled by software (if not locked). It selects the comparator 2 output: