Struct stm32g0::stm32g0b0::tim1::ccr5::R

pub struct R(_);

Register CCR5 reader

Implementations

impl R

pub fn ccr5(&self) -> CCR5_R

Bits 0:15 - Capture/Compare 5 value CCR5 is the value to be loaded in the actual capture/compare 5 register (preload value). It is loaded permanently if the preload feature is not selected in the TIMx_CCMR3 register (bit OC5PE). Else the preload value is copied in the active capture/compare 5 register when an update event occurs. The active capture/compare register contains the value to be compared to the counter TIMx_CNT and signaled on OC5 output.

pub fn gc5c1(&self) -> GC5C1_R

Bit 29 - Group Channel 5 and Channel 1 Distortion on Channel 1 output: This bit can either have immediate effect or be preloaded and taken into account after an update event (if preload feature is selected in TIMxCCMR1). Note: it is also possible to apply this distortion on combined PWM signals.

pub fn gc5c2(&self) -> GC5C2_R

Bit 30 - Group Channel 5 and Channel 2 Distortion on Channel 2 output: This bit can either have immediate effect or be preloaded and taken into account after an update event (if preload feature is selected in TIMxCCMR1). Note: it is also possible to apply this distortion on combined PWM signals.

pub fn gc5c3(&self) -> GC5C3_R

Bit 31 - Group Channel 5 and Channel 3 Distortion on Channel 3 output: This bit can either have immediate effect or be preloaded and taken into account after an update event (if preload feature is selected in TIMxCCMR2). Note: it is also possible to apply this distortion on combined PWM signals.

Methods from Deref<Target = R<CCR5_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<CCR5_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<CCR5_SPEC>> for R

fn from(reader: R<CCR5_SPEC>) -> Self

Converts to this type from the input type.