Struct stm32g0::stm32g0c1::tim1::ccmr2_output::W

pub struct W(_);

Register CCMR2_Output writer

Implementations

impl W

pub fn cc3s(&mut self) -> CC3S_W<'_>

Bits 0:1 - Capture/Compare 3 selection This bit-field defines the direction of the channel (input/output) as well as the used input. Note: CC3S bits are writable only when the channel is OFF (CC3E = ’0’ in TIMx_CCER).

pub fn oc3fe(&mut self) -> OC3FE_W<'_>

Bit 2 - Output compare 3 fast enable Refer to OC1FE description.

pub fn oc3pe(&mut self) -> OC3PE_W<'_>

Bit 3 - Output compare 3 preload enable Refer to OC1PE description.

pub fn oc3m(&mut self) -> OC3M_W<'_>

Bits 4:6 - Output compare 3 mode Refer to OC1M[3:0] description.

pub fn oc3ce(&mut self) -> OC3CE_W<'_>

Bit 7 - Output compare 3 clear enable Refer to OC1CE description.

pub fn cc4s(&mut self) -> CC4S_W<'_>

Bits 8:9 - Capture/Compare 4 selection This bit-field defines the direction of the channel (input/output) as well as the used input. Note: CC4S bits are writable only when the channel is OFF (CC4E = ’0’ in TIMx_CCER).

pub fn oc4fe(&mut self) -> OC4FE_W<'_>

Bit 10 - Output compare 4 fast enable Refer to OC1FE description.

pub fn oc4pe(&mut self) -> OC4PE_W<'_>

Bit 11 - Output compare 4 preload enable Refer to OC1PE description.

pub fn oc4m(&mut self) -> OC4M_W<'_>

Bits 12:14 - Output compare 4 mode Refer to OC3M[3:0] description.

pub fn oc4ce(&mut self) -> OC4CE_W<'_>

Bit 15 - Output compare 4 clear enable Refer to OC1CE description.

pub fn oc3m_3(&mut self) -> OC3M_3_W<'_>

Bit 16 - Output compare 3 mode Refer to OC1M[3:0] description.

pub fn oc4m_3(&mut self) -> OC4M_3_W<'_>

Bit 24 - Output compare 4 mode Refer to OC3M[3:0] description.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CCMR2_OUTPUT_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CCMR2_OUTPUT_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<CCMR2_OUTPUT_SPEC>> for W

fn from(writer: W<CCMR2_OUTPUT_SPEC>) -> Self

Performs the conversion.