Struct stm32g0::stm32g0c1::dbg::dbg_apb_fz1::R

pub struct R(_);

Register DBG_APB_FZ1 reader

Implementations

impl R

pub fn dbg_tim2_stop(&self) -> DBG_TIM2_STOP_R

Bit 0 - Clocking of TIM2 counter when the core is halted This bit enables/disables the clock to the counter of TIM2 when the core is halted:

pub fn dbg_tim3_stop(&self) -> DBG_TIM3_STOP_R

Bit 1 - Clocking of TIM3 counter when the core is halted This bit enables/disables the clock to the counter of TIM3 when the core is halted:

pub fn dbg_tim6_stop(&self) -> DBG_TIM6_STOP_R

Bit 4 - Clocking of TIM6 counter when the core is halted This bit enables/disables the clock to the counter of TIM6 when the core is halted:

pub fn dbg_tim7_stop(&self) -> DBG_TIM7_STOP_R

Bit 5 - Clocking of TIM7 counter when the core is halted. This bit enables/disables the clock to the counter of ITIM7 when the core is halted:

pub fn dbg_rtc_stop(&self) -> DBG_RTC_STOP_R

Bit 10 - Clocking of RTC counter when the core is halted This bit enables/disables the clock to the counter of RTC when the core is halted:

pub fn dbg_wwdg_stop(&self) -> DBG_WWDG_STOP_R

Bit 11 - Clocking of WWDG counter when the core is halted This bit enables/disables the clock to the counter of WWDG when the core is halted:

pub fn dbg_iwdg_stop(&self) -> DBG_IWDG_STOP_R

Bit 12 - Clocking of IWDG counter when the core is halted This bit enables/disables the clock to the counter of IWDG when the core is halted:

pub fn dbg_i2c1_smbus_timeout(&self) -> DBG_I2C1_SMBUS_TIMEOUT_R

Bit 21 - SMBUS timeout when core is halted

pub fn dbg_lptim2_stop(&self) -> DBG_LPTIM2_STOP_R

Bit 30 - Clocking of LPTIMER2 counter when the core is halted This bit enables/disables the clock to the counter of LPTIMER2 when the core is halted:

pub fn dbg_lptim1_stop(&self) -> DBG_LPTIM1_STOP_R

Bit 31 - Clocking of LPTIMER1 counter when the core is halted This bit enables/disables the clock to the counter of LPTIMER1 when the core is halted:

Methods from Deref<Target = R<DBG_APB_FZ1_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<DBG_APB_FZ1_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<DBG_APB_FZ1_SPEC>> for R

fn from(reader: R<DBG_APB_FZ1_SPEC>) -> Self

Performs the conversion.