Struct stm32g0::stm32g0c1::dac::dac_cr::CEN2_W

pub struct CEN2_W<'a> { /* fields omitted */ }

Field CEN2 writer - DAC channel2 calibration enable This bit is set and cleared by software to enable/disable DAC channel2 calibration, it can be written only if EN2 bit is set to 0 into DAC_CR (the calibration mode can be entered/exit only when the DAC channel is disabled) Otherwise, the write operation is ignored. Note: This bit is available only on dual-channel DACs. Refer to implementation.

Implementations

impl<'a> CEN2_W<'a>

pub fn variant(self, variant: CEN2_A) -> &'a mut W

Writes variant to the field

pub fn b_0x0(self) -> &'a mut W

DAC channel2 in Normal operating mode

pub fn b_0x1(self) -> &'a mut W

DAC channel2 in calibration mode

pub fn set_bit(self) -> &'a mut W

Sets the field bit

pub fn clear_bit(self) -> &'a mut W

Clears the field bit

pub fn bit(self, value: bool) -> &'a mut W

Writes raw bits to the field