Module calfact

Expand description

ADC Calibration factor

Structs§

CALFACT_R: Field CALFACT reader - Calibration factor These bits are written by hardware or by software. Once a calibration is complete,they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA[6:0] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8[3:0] for a definition of channel selection.
CALFACT_W: Field CALFACT writer - Calibration factor These bits are written by hardware or by software. Once a calibration is complete,they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA[6:0] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8[3:0] for a definition of channel selection.
R: Register CALFACT reader
W: Register CALFACT writer