[−][src]Struct stm32f4xx_hal::stm32::rcc::apb2lpenr::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn tim1lpen(&self) -> TIM1LPENR
[src]
Bit 0 - TIM1 clock enable during Sleep mode
pub fn tim8lpen(&self) -> TIM1LPENR
[src]
Bit 1 - TIM8 clock enable during Sleep mode
pub fn usart1lpen(&self) -> TIM1LPENR
[src]
Bit 4 - USART1 clock enable during Sleep mode
pub fn usart6lpen(&self) -> TIM1LPENR
[src]
Bit 5 - USART6 clock enable during Sleep mode
pub fn adc1lpen(&self) -> TIM1LPENR
[src]
Bit 8 - ADC1 clock enable during Sleep mode
pub fn adc2lpen(&self) -> TIM1LPENR
[src]
Bit 9 - ADC2 clock enable during Sleep mode
pub fn adc3lpen(&self) -> TIM1LPENR
[src]
Bit 10 - ADC 3 clock enable during Sleep mode
pub fn sdiolpen(&self) -> TIM1LPENR
[src]
Bit 11 - SDIO clock enable during Sleep mode
pub fn spi1lpen(&self) -> TIM1LPENR
[src]
Bit 12 - SPI 1 clock enable during Sleep mode
pub fn syscfglpen(&self) -> TIM1LPENR
[src]
Bit 14 - System configuration controller clock enable during Sleep mode
pub fn tim9lpen(&self) -> TIM1LPENR
[src]
Bit 16 - TIM9 clock enable during sleep mode
pub fn tim10lpen(&self) -> TIM1LPENR
[src]
Bit 17 - TIM10 clock enable during Sleep mode
pub fn tim11lpen(&self) -> TIM1LPENR
[src]
Bit 18 - TIM11 clock enable during Sleep mode
pub fn spi6lpen(&self) -> TIM1LPENR
[src]
Bit 21 - SPI6 clock enable during Sleep mode
pub fn sai1lpen(&self) -> TIM1LPENR
[src]
Bit 22 - SAI1 clock enable during Sleep mode
pub fn ltdclpen(&self) -> TIM1LPENR
[src]
Bit 26 - LTDC clock enable during Sleep mode
pub fn spi4lpen(&self) -> TIM1LPENR
[src]
Bit 13 - SPI4 clock enable during Sleep mode
pub fn spi5lpen(&self) -> TIM1LPENR
[src]
Bit 20 - SPI5 clock enable during Sleep mode
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self