[−][src]Struct stm32f3xx_hal::gpio::gpioa::PA12
Pin PA12
Implementations
impl<MODE> PA12<MODE>[src]
pub fn into_af1(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF1>[src]
Configures PA12 to serve as alternate function: AF1
pub fn into_af6(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF6>[src]
Configures PA12 to serve as alternate function: AF6
pub fn into_af7(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF7>[src]
Configures PA12 to serve as alternate function: AF7
pub fn into_af8(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF8>[src]
Configures PA12 to serve as alternate function: AF8
pub fn into_af9(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF9>[src]
Configures PA12 to serve as alternate function: AF9
pub fn into_af10(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF10>[src]
Configures PA12 to serve as alternate function: AF10
pub fn into_af11(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF11>[src]
Configures PA12 to serve as alternate function: AF11
pub fn into_af14(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF14>[src]
Configures PA12 to serve as alternate function: AF14
pub fn into_af15(self, moder: &mut MODER, afr: &mut AFRH) -> PA12<AF15>[src]
Configures PA12 to serve as alternate function: AF15
pub fn into_floating_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA12<Input<Floating>>[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA12<Input<Floating>>
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA12<Input<PullDown>>[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA12<Input<PullDown>>
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA12<Input<PullUp>>[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PA12<Input<PullUp>>
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA12<Output<OpenDrain>>[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA12<Output<OpenDrain>>
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA12<Output<PushPull>>[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PA12<Output<PushPull>>
Configures the pin to operate as an push pull output pin
pub fn into_analog(self, moder: &mut MODER, pupdr: &mut PUPDR) -> PA12<Analog>[src]
Configures the pin to operate as analog, with disabled schmitt trigger. This mode is suitable when the pin is connected to the DAC or ADC.
impl PA12<Output<OpenDrain>>[src]
pub fn internal_pull_up(&mut self, pupdr: &mut PUPDR, on: bool)[src]
Enables / disables the internal pull up
impl<MODE> PA12<Output<MODE>>[src]
pub fn downgrade(self) -> PAx<Output<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PA12<Input<MODE>>[src]
pub fn downgrade(self) -> PAx<Input<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> Default for PA12<Output<MODE>>[src]
impl<MODE> InputPin for PA12<Input<MODE>>[src]
type Error = Infallible
Error type
pub fn is_high(&self) -> Result<bool, Self::Error>[src]
pub fn is_low(&self) -> Result<bool, Self::Error>[src]
impl InputPin for PA12<Output<OpenDrain>>[src]
type Error = Infallible
Error type
pub fn is_high(&self) -> Result<bool, Self::Error>[src]
pub fn is_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> OutputPin for PA12<Output<MODE>>[src]
type Error = Infallible
Error type
pub fn set_high(&mut self) -> Result<(), Self::Error>[src]
pub fn set_low(&mut self) -> Result<(), Self::Error>[src]
impl<MODE> StatefulOutputPin for PA12<Output<MODE>>[src]
pub fn is_set_high(&self) -> Result<bool, Self::Error>[src]
pub fn is_set_low(&self) -> Result<bool, Self::Error>[src]
Auto Trait Implementations
impl<MODE> Send for PA12<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PA12<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PA12<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T[src]
impl<T> From<T> for T[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<P> ToggleableOutputPin for P where
P: Default, [src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
pub fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,