Crate stm32f3xx_hal_v2

Expand description

§stm32f3xx-hal

stm32f3xx-hal contains a multi device hardware abstraction on top of the peripheral access API for the STMicro STM32F3 series microcontrollers. The selection of the MCU is done by feature gates

§Selecting the right chip

This crate requires you to specify your target chip as a feature.

Please select one of the following

(Note: x denotes any character in [a-z])

stm32f301
stm32f318
stm32f302xb
stm32f302xc
stm32f302xd
stm32f302xe
stm32f302x6
stm32f302x8
stm32f303xb
stm32f303xc
stm32f303xd
stm32f303xe
stm32f303x6
stm32f303x8
stm32f373
stm32f378
stm32f334
stm32f328
stm32f358
stm32f398

Example: The STM32F3Discovery board has a STM32F303VCT6 chip. So you want to expand your call to cargo with --features stm32f303xc.

For more information, see the README

Re-exports§

pub use embedded_hal as hal;
pub use nb;

Modules§

adc: API for the ADC (Analog to Digital Converter)
can: Controller Area Network
clocks: This file provides an alternative way to set clocks than in the rcc modules`, which may be less error prone, and is more opaque. It works by setting scalers etc, then calculating frequencies, instead of solving for a set of scalers that meet specified frequeincies.
dac: Configure the internal DAC on the stm32f3xx. Incomplete, but includes basic operation.
delay: Delays
dma: Direct memory access (DMA) controller
exti: Configure external interrupts for the stm32f3xx. See STM32f303 reference man section 14, including Table 82.
flash: Flash memory
gpio: General Purpose Input / Output
i2c: Inter-Integrated Circuit (I2C) bus
low_power: This module contains code used to place the STM32F3 in low power modes. Reference section 3.7: Power management of the user manual, and more importantly, 7.3: Low-power modes of reference manual.
pac: Peripheral access
prelude: Prelude
pwm: Pulse width modulation
rcc: Reset and Clock Control
rtc: Real Time Clock
serial: Serial
spi: Serial Peripheral Interface (SPI) bus
stm32: Peripheral access Peripheral access
time: Time units
timer: Timers
usb: USB peripheral
watchdog: Watchdog

Macros§

block: Turns the non-blocking expression $e into a blocking operation.
expect: Wrapper macro for .expect()
make_wakeup_interrupt_handler: This provides a default handler for RTC inputs that clears the EXTI line and wakeup flag. If you don’t need additional functionality, run this in the main body of your program, eg: make_rtc_interrupt_handler!(RTC_WKUP);
unwrap: Wrapper macro for .unwrap()

Enums§

interrupt: Enumeration of all the interrupts

Attribute Macros§

interrupt: Attribute to declare an interrupt (AKA device-specific exception) handler

Crate stm32f3xx_hal_v2Copy item path