[−][src]Struct stm32f0xx_hal::gpio::gpiob::PB3
Pin
Implementations
impl<MODE> PB3<MODE>
[src]
pub fn into_alternate_af0(self, _cs: &CriticalSection) -> PB3<Alternate<AF0>>
[src]
Configures the pin to operate in AF0 mode
pub fn into_alternate_af1(self, _cs: &CriticalSection) -> PB3<Alternate<AF1>>
[src]
Configures the pin to operate in AF1 mode
pub fn into_alternate_af2(self, _cs: &CriticalSection) -> PB3<Alternate<AF2>>
[src]
Configures the pin to operate in AF2 mode
pub fn into_alternate_af3(self, _cs: &CriticalSection) -> PB3<Alternate<AF3>>
[src]
Configures the pin to operate in AF3 mode
pub fn into_alternate_af4(self, _cs: &CriticalSection) -> PB3<Alternate<AF4>>
[src]
Configures the pin to operate in AF4 mode
pub fn into_alternate_af5(self, _cs: &CriticalSection) -> PB3<Alternate<AF5>>
[src]
Configures the pin to operate in AF5 mode
pub fn into_alternate_af6(self, _cs: &CriticalSection) -> PB3<Alternate<AF6>>
[src]
Configures the pin to operate in AF6 mode
pub fn into_alternate_af7(self, _cs: &CriticalSection) -> PB3<Alternate<AF7>>
[src]
Configures the pin to operate in AF7 mode
pub fn into_floating_input(self, _cs: &CriticalSection) -> PB3<Input<Floating>>
[src]
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(self, _cs: &CriticalSection) -> PB3<Input<PullDown>>
[src]
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(self, _cs: &CriticalSection) -> PB3<Input<PullUp>>
[src]
Configures the pin to operate as a pulled up input pin
pub fn into_analog(self, _cs: &CriticalSection) -> PB3<Analog>
[src]
Configures the pin to operate as an analog pin
pub fn into_open_drain_output(
self,
_cs: &CriticalSection
) -> PB3<Output<OpenDrain>>
[src]
self,
_cs: &CriticalSection
) -> PB3<Output<OpenDrain>>
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(
self,
_cs: &CriticalSection
) -> PB3<Output<PushPull>>
[src]
self,
_cs: &CriticalSection
) -> PB3<Output<PushPull>>
Configures the pin to operate as an push pull output pin
pub fn into_push_pull_output_hs(
self,
_cs: &CriticalSection
) -> PB3<Output<PushPull>>
[src]
self,
_cs: &CriticalSection
) -> PB3<Output<PushPull>>
Configures the pin to operate as an push pull output pin with quick fall and rise times
impl PB3<Output<OpenDrain>>
[src]
pub fn internal_pull_up(&mut self, _cs: &CriticalSection, on: bool)
[src]
Enables / disables the internal pull up
impl<AF> PB3<Alternate<AF>>
[src]
pub fn internal_pull_up(self, _cs: &CriticalSection, on: bool) -> Self
[src]
Enables / disables the internal pull up
impl<AF> PB3<Alternate<AF>>
[src]
pub fn set_open_drain(self, _cs: &CriticalSection) -> Self
[src]
Turns pin alternate configuration pin into open drain
impl<MODE> PB3<Output<MODE>>
[src]
pub fn downgrade(self) -> Pin<Output<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PB3<Input<MODE>>
[src]
pub fn downgrade(self) -> Pin<Input<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> Default for PB3<Output<MODE>>
[src]
impl InputPin for PB3<Output<OpenDrain>>
[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>
[src]
fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl<MODE> InputPin for PB3<Input<MODE>>
[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>
[src]
fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl<MODE> OutputPin for PB3<Output<MODE>>
[src]
type Error = Infallible
Error type
fn set_high(&mut self) -> Result<(), Self::Error>
[src]
fn set_low(&mut self) -> Result<(), Self::Error>
[src]
impl SckPin<SPI1> for PB3<Alternate<AF0>>
[src]
impl<MODE> StatefulOutputPin for PB3<Output<MODE>>
[src]
fn is_set_high(&self) -> Result<bool, Self::Error>
[src]
fn is_set_low(&self) -> Result<bool, Self::Error>
[src]
impl TscPin<TSC> for PB3<Alternate<AF3>>
[src]
Auto Trait Implementations
impl<MODE> Send for PB3<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PB3<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PB3<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Default for T where
T: Default,
[src]
T: Default,
impl<T> From<T> for T
[src]
impl<T> InputPin for T where
T: InputPin,
[src]
T: InputPin,
type Error = ()
Error type
fn is_low(&self) -> Result<bool, <T as InputPin>::Error>
[src]
fn is_high(&self) -> Result<bool, <T as InputPin>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> OutputPin for T where
T: OutputPin,
[src]
T: OutputPin,
type Error = ()
Error type
fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>
[src]
fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>
[src]
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> StatefulOutputPin for T where
T: StatefulOutputPin + OutputPin,
[src]
T: StatefulOutputPin + OutputPin,
fn is_set_low(&self) -> Result<bool, <T as OutputPin>::Error>
[src]
fn is_set_high(&self) -> Result<bool, <T as OutputPin>::Error>
[src]
impl<P> ToggleableOutputPin for P where
P: Default,
[src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>
[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,