Struct stm32f0x2::usart1::cr2::R
[−]
[src]
pub struct R { /* fields omitted */ }
Value read from the register
Methods
impl R
[src]
fn bits(&self) -> u32
[src]
Value of the register as raw bits
fn add4(&self) -> ADD4R
[src]
Bits 28:31 - Address of the USART node
fn add0(&self) -> ADD0R
[src]
Bits 24:27 - Address of the USART node
fn rtoen(&self) -> RTOENR
[src]
Bit 23 - Receiver timeout enable
fn abrmod(&self) -> ABRMODR
[src]
Bits 21:22 - Auto baud rate mode
fn abren(&self) -> ABRENR
[src]
Bit 20 - Auto baud rate enable
fn msbfirst(&self) -> MSBFIRSTR
[src]
Bit 19 - Most significant bit first
fn datainv(&self) -> DATAINVR
[src]
Bit 18 - Binary data inversion
fn txinv(&self) -> TXINVR
[src]
Bit 17 - TX pin active level inversion
fn rxinv(&self) -> RXINVR
[src]
Bit 16 - RX pin active level inversion
fn swap(&self) -> SWAPR
[src]
Bit 15 - Swap TX/RX pins
fn linen(&self) -> LINENR
[src]
Bit 14 - LIN mode enable
fn stop(&self) -> STOPR
[src]
Bits 12:13 - STOP bits
fn clken(&self) -> CLKENR
[src]
Bit 11 - Clock enable
fn cpol(&self) -> CPOLR
[src]
Bit 10 - Clock polarity
fn cpha(&self) -> CPHAR
[src]
Bit 9 - Clock phase
fn lbcl(&self) -> LBCLR
[src]
Bit 8 - Last bit clock pulse
fn lbdie(&self) -> LBDIER
[src]
Bit 6 - LIN break detection interrupt enable
fn lbdl(&self) -> LBDLR
[src]
Bit 5 - LIN break detection length
fn addm7(&self) -> ADDM7R
[src]
Bit 4 - 7-bit Address Detection/4-bit Address Detection