Crate stm32cubeprogrammer_sys

Source

Re-exports§

pub use libloading;

Structs§

CubeProgrammer_API
__fsid_t
bankSector: \struct bankSector. \brief This stucture indicates the sectors parameters.
bank_C: \struct bank_C \brief Get option bytes banks internal descriptions. \note STLINK and Bootloader interfaces have different addresses to access to option bytes registres.
bitCoefficient_C: \struct bitCoefficient_C. \brief This stucture indicates the coefficients to access to the adequate option bit.
bitValue_C: \struct bitValue_C. \brief This stucture describes the option Bit value.
bit_C: \struct bit_C. \brief This stucture will be filled by values which characterize the device’s option bytes. \note See product reference manual for more details.
canConnectParameters: \struct canConnectParameters \brief Specify the CAN connect parameters. \note Not all configurations are supported by STM32 Bootloader, such as CAN type is STANDARD and the filter should be always activated. \note Recommended CAN parameters : br=125000, mode=0, ide=0, rtr=0, fifo=0, fm=0, fs=1, fe=1, fbn=0
category_C: \struct category_C \brief Get option bytes banks categories descriptions.
debugConnectParameters: \struct debugConnectParameters \brief Get device characterization and specify connection parameters through ST-LINK interface.
deviceBank: \struct deviceBank. \brief This stucture defines the memory sectors for each bank.
deviceSector: \struct deviceSector \brief Get device sectors basic informations.
dfuConnectParameters: \struct dfuConnectParameters \brief Specify the USB DFU connect parameters.
dfuDeviceInfo: \struct dfuDeviceInfo \brief Get DFU device informations .
displayCallBacks: \struct displayCallBacks \brief Functions must be implemented to personalize the display of messages.
externalLoader: \struct externalLoader \brief Get external Loader parameters to launch the process of programming an external flash memory.
externalStorageInfo: \struct externalStorageInfo \brief Get external storage informations useful for external Loader.
fileData_C: \struct FileData_C \brief Get file required informations.
frequencies: \struct frequencies \brief Get supported frequencies for JTAG and SWD ineterfaces.
generalInf: \struct GeneralInf \brief Get device general informations.
i2cConnectParameters: \struct i2cConnectParameters \brief Specify the I2C connect parameters. \warning The Bootloader Slave address varies depending on the device (see AN2606). \note Not all configurations are supported by STM32 Bootloader, such as address in 7 bits form, analog filter: ENABLE, digital filter: DISABLE. \note Recommended I2C parameters : add=0x??, br=400, sm=1, am=0, af=1, df=0, dnf=0, rt=0, ft=0
peripheral_C: \struct peripheral_C \brief Get peripheral option bytes general informations.
segmentData_C
spiConnectParameters: \struct spiConnectParameters \brief Specify the SPI connect parameters. \note Recommended SPI parameters : baudrate=375, crcPol=7, direction=0, cpha=0, cpol=0, crc=0, firstBit=1, frameFormat=0, dataSize=1, mode=1, nss=1, nssPulse=1, delay=1
storageStructure: \struct storageStructure. \brief This stucture describes sotrage characterization.
usartConnectParameters: \struct usartConnectParameters \brief Specify the USART connect parameters.

Constants§

Type Aliases§

Crate stm32cubeprogrammer_sysCopy item path

Re-exports§

Structs§

Constants§

Type Aliases§

Crate stm32cubeprogrammer_sys