Module nbtp 

FDCAN nominal bit timing and prescaler register

Structs

NBTPrs

FDCAN nominal bit timing and prescaler register

Type Aliases

NBRP_R

Field NBRP reader - Bit rate prescaler Value by which the oscillator frequency is divided for generating the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values are 0 to 511. The actual interpretation by the hardware of this value is such that one more than the value programmed here is used. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1.

NBRP_W

Field NBRP writer - Bit rate prescaler Value by which the oscillator frequency is divided for generating the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values are 0 to 511. The actual interpretation by the hardware of this value is such that one more than the value programmed here is used. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1.

NSJW_R

Field NSJW reader - Nominal (re)synchronization jump width Valid values are 0 to 127. The actual interpretation by the hardware of this value is such that the used value is the one programmed incremented by one. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1.

NSJW_W

Field NSJW writer - Nominal (re)synchronization jump width Valid values are 0 to 127. The actual interpretation by the hardware of this value is such that the used value is the one programmed incremented by one. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1.

NTSEG1_R

Field NTSEG1 reader - Nominal time segment before sample point Valid values are 0 to 255. The actual interpretation by the hardware of this value is such that one more than the programmed value is used. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1.

NTSEG1_W

Field NTSEG1 writer - Nominal time segment before sample point Valid values are 0 to 255. The actual interpretation by the hardware of this value is such that one more than the programmed value is used. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1.

NTSEG2_R

Field NTSEG2 reader - Nominal time segment after sample point Valid values are 0 to 127. The actual interpretation by the hardware of this value is such that one more than the programmed value is used.

NTSEG2_W

Field NTSEG2 writer - Nominal time segment after sample point Valid values are 0 to 127. The actual interpretation by the hardware of this value is such that one more than the programmed value is used.

R

Register NBTP reader

W

Register NBTP writer