Struct stm32_hal2::pac::usart1::cr2::W

pub struct W(/* private fields */);

Register CR2 writer

Implementations

impl W

pub fn rtoen(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, RTOEN_A, BitM, 23>

Bit 23 - Receiver timeout enable

pub fn abren(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, ABREN_A, BitM, 20>

Bit 20 - Auto baud rate enable

pub fn msbfirst( &mut self ) -> BitWriterRaw<'_, u32, CR2_SPEC, MSBFIRST_A, BitM, 19>

Bit 19 - Most significant bit first

pub fn datainv( &mut self ) -> BitWriterRaw<'_, u32, CR2_SPEC, DATAINV_A, BitM, 18>

Bit 18 - Binary data inversion

pub fn txinv(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, TXINV_A, BitM, 17>

Bit 17 - TX pin active level inversion

pub fn rxinv(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, RXINV_A, BitM, 16>

Bit 16 - RX pin active level inversion

pub fn swap(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, SWAP_A, BitM, 15>

Bit 15 - Swap TX/RX pins

pub fn linen(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, LINEN_A, BitM, 14>

Bit 14 - LIN mode enable

pub fn stop( &mut self ) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, STOP_A, Safe, 2, 12>

Bits 12:13 - STOP bits

pub fn clken(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, CLKEN_A, BitM, 11>

Bit 11 - Clock enable

pub fn cpol(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, CPOL_A, BitM, 10>

Bit 10 - Clock polarity

pub fn cpha(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, CPHA_A, BitM, 9>

Bit 9 - Clock phase

pub fn lbcl(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, LBCL_A, BitM, 8>

Bit 8 - Last bit clock pulse

pub fn lbdie(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, LBDIE_A, BitM, 6>

Bit 6 - LIN break detection interrupt enable

pub fn lbdl(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, LBDL_A, BitM, 5>

Bit 5 - LIN break detection length

pub fn addm7(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, ADDM7_A, BitM, 4>

Bit 4 - 7-bit Address Detection/4-bit Address Detection

pub fn dis_nss(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, bool, BitM, 3>

Bit 3 - When the DSI_NSS bit is set, the NSS pin input is ignored

pub fn slven(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, bool, BitM, 0>

Bit 0 - Synchronous Slave mode enable

pub fn abrmod( &mut self ) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, ABRMOD_A, Safe, 2, 21>

Bits 21:22 - Auto baud rate mode

pub fn add(&mut self) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, u8, Safe, 8, 24>

Bits 24:31 - Address of the USART node

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<CR2_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CR2_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<CR2_SPEC>> for W

fn from(writer: W<CR2_SPEC>) -> W

Converts to this type from the input type.