Module stm32_hal2::pac::gpioa::ospeedr

GPIO port output speed register

Structs

• OSPEEDR_SPEC
  GPIO port output speed register
• R
  Register OSPEEDR reader
• W
  Register OSPEEDR writer

Enums

• OSPEEDR0_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR1_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR2_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR3_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR4_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR5_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR6_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR7_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR8_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR9_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR10_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR11_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR12_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR13_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR14_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR15_A
  1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

Type Aliases

• OSPEEDR0_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR0_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR1_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR1_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR2_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR2_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR3_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR3_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR4_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR4_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR5_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR5_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR6_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR6_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR7_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR7_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR8_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR8_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR9_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR9_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR10_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR10_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR11_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR11_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR12_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR12_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR13_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR13_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR14_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR14_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR15_R
  Field OSPEEDR0 reader - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
• OSPEEDR15_W
  Field OSPEEDR0 writer - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.