Module stm32_hal2::pac::gpioa

GPIO

Modules

• afrh
  GPIO alternate function high register
• afrl
  GPIO alternate function low register
• bsrr
  GPIO port bit set/reset register
• idr
  GPIO port input data register
• lckr
  This register is used to lock the configuration of the port bits when a correct write sequence is applied to bit 16 (LCKK). The value of bits [15:0] is used to lock the configuration of the GPIO. During the write sequence, the value of LCKR[15:0] must not change. When the LOCK sequence has been applied on a port bit, the value of this port bit can no longer be modified until the next MCU reset or peripheral reset.A specific write sequence is used to write to the GPIOx_LCKR register. Only word access (32-bit long) is allowed during this locking sequence.Each lock bit freezes a specific configuration register (control and alternate function registers).
• moder
  GPIO port mode register
• odr
  GPIO port output data register
• ospeedr
  GPIO port output speed register
• otyper
  GPIO port output type register
• pupdr
  GPIO port pull-up/pull-down register

Structs

• RegisterBlock
  Register block

Type Aliases

• AFRH
  AFRH register accessor: an alias for Reg<AFRH_SPEC>
• AFRL
  AFRL register accessor: an alias for Reg<AFRL_SPEC>
• BSRR
  BSRR register accessor: an alias for Reg<BSRR_SPEC>
• IDR
  IDR register accessor: an alias for Reg<IDR_SPEC>
• LCKR
  LCKR register accessor: an alias for Reg<LCKR_SPEC>
• MODER
  MODER register accessor: an alias for Reg<MODER_SPEC>
• ODR
  ODR register accessor: an alias for Reg<ODR_SPEC>
• OSPEEDR
  OSPEEDR register accessor: an alias for Reg<OSPEEDR_SPEC>
• OTYPER
  OTYPER register accessor: an alias for Reg<OTYPER_SPEC>
• PUPDR
  PUPDR register accessor: an alias for Reg<PUPDR_SPEC>