pub struct R(_);
Expand description
Register PUPDR
reader
Implementations
sourceimpl R
impl R
sourcepub fn pupdr0(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr0(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 0:1 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr1(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr1(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 2:3 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr2(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr2(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 4:5 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr3(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr3(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 6:7 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr4(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr4(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 8:9 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr5(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr5(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 10:11 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr6(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr6(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 12:13 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr7(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr7(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 14:15 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr8(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr8(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 16:17 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr9(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr9(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 18:19 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr10(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr10(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 20:21 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr11(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr11(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 22:23 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr12(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr12(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 24:25 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
sourcepub fn pupdr13(&self) -> FieldReaderRaw<u8, PUPDR0_A>
pub fn pupdr13(&self) -> FieldReaderRaw<u8, PUPDR0_A>
Bits 26:27 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O pull-up or pull-down
Methods from Deref<Target = R<PUPDR_SPEC>>
sourcepub fn bits(&self) -> <REG as RegisterSpec>::Ux
pub fn bits(&self) -> <REG as RegisterSpec>::Ux
Reads raw bits from register.