Struct stm32_hal2::pac::gpioa::ospeedr::W

source · [−]

pub struct W(_);

Expand description

Register OSPEEDR writer

Implementations

source

impl W

source

pub fn ospeedr0(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 0>

Bits 0:1 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr1(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 2>

Bits 2:3 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr2(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 4>

Bits 4:5 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr3(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 6>

Bits 6:7 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr4(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 8>

Bits 8:9 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr5(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 10>

Bits 10:11 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr6(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 12>

Bits 12:13 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr7(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 14>

Bits 14:15 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr8(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 16>

Bits 16:17 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr9(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 18>

Bits 18:19 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr10(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 20>

Bits 20:21 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr11(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 22>

Bits 22:23 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr12(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 24>

Bits 24:25 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr13(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 26>

Bits 26:27 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr14(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 28>

Bits 28:29 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub fn ospeedr15(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 30>

Bits 30:31 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.

source

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<OSPEEDR_SPEC>>

source

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Trait Implementations

source

impl Deref for W

type Target = W<OSPEEDR_SPEC>

The resulting type after dereferencing.

source

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

source

impl DerefMut for W

source

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

source

impl From<W<OSPEEDR_SPEC>> for W

source

fn from(writer: W<OSPEEDR_SPEC>) -> W

Converts to this type from the input type.

Auto Trait Implementations

impl RefUnwindSafe for W

impl Send for W

impl Sync for W

impl Unpin for W

impl UnwindSafe for W

Blanket Implementations

source

impl<T> Any for Twhere
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for Twhere
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct stm32_hal2::pac::gpioa::ospeedr::W

Implementations

impl W

pub fn ospeedr0( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 0>

pub fn ospeedr1( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 2>

pub fn ospeedr2( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 4>

pub fn ospeedr3( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 6>

pub fn ospeedr4( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 8>

pub fn ospeedr5( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 10>

pub fn ospeedr6( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 12>

pub fn ospeedr7( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 14>

pub fn ospeedr8( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 16>

pub fn ospeedr9( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 18>

pub fn ospeedr10( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 20>

pub fn ospeedr11( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 22>

pub fn ospeedr12( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 24>

pub fn ospeedr13( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 26>

pub fn ospeedr14( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 28>

pub fn ospeedr15( &mut self) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 30>

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Methods from Deref<Target = W<OSPEEDR_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Trait Implementations

impl Deref for W

type Target = W<OSPEEDR_SPEC>

fn deref(&self) -> &<W as Deref>::Target

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

impl From<W<OSPEEDR_SPEC>> for W

fn from(writer: W<OSPEEDR_SPEC>) -> W

Auto Trait Implementations

impl RefUnwindSafe for W

impl Send for W

impl Sync for W

impl Unpin for W

impl UnwindSafe for W

Blanket Implementations

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

pub fn ospeedr0(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 0>

pub fn ospeedr1(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 2>

pub fn ospeedr2(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 4>

pub fn ospeedr3(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 6>

pub fn ospeedr4(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 8>

pub fn ospeedr5(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 10>

pub fn ospeedr6(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 12>

pub fn ospeedr7(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 14>

pub fn ospeedr8(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 16>

pub fn ospeedr9(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 18>

pub fn ospeedr10(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 20>

pub fn ospeedr11(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 22>

pub fn ospeedr12(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 24>

pub fn ospeedr13(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 26>

pub fn ospeedr14(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 28>

pub fn ospeedr15(
&mut self
) -> FieldWriterRaw<'_, u32, OSPEEDR_SPEC, u8, OSPEEDR0_A, Safe, 2, 30>

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

impl<T, U> Into<U> for Twhere
U: From<T>,

impl<T, U> TryFrom<U> for Twhere
U: Into<T>,

impl<T, U> TryInto<U> for Twhere
U: TryFrom<T>,