pub struct R(_);
Expand description
Register OSPEEDR
reader
Implementations
sourceimpl R
impl R
sourcepub fn ospeedr0(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr0(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 0:1 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr1(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr1(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 2:3 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr2(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr2(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 4:5 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr3(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr3(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 6:7 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr4(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr4(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 8:9 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr5(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr5(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 10:11 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr6(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr6(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 12:13 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr7(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr7(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 14:15 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr8(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr8(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 16:17 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr9(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr9(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 18:19 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr10(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr10(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 20:21 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr11(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr11(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 22:23 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr12(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr12(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 24:25 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr13(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr13(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 26:27 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr14(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr14(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 28:29 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
sourcepub fn ospeedr15(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
pub fn ospeedr15(&self) -> FieldReaderRaw<u8, OSPEEDR0_A>
Bits 30:31 - 1:0]: Port x configuration bits (y = 0..15) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed.
Methods from Deref<Target = R<OSPEEDR_SPEC>>
sourcepub fn bits(&self) -> <REG as RegisterSpec>::Ux
pub fn bits(&self) -> <REG as RegisterSpec>::Ux
Reads raw bits from register.