pub struct R(_);
Expand description
Register CR
reader
Implementations
sourceimpl R
impl R
sourcepub fn start(&self) -> BitReaderRaw<START_A>
pub fn start(&self) -> BitReaderRaw<START_A>
Bit 0 - Start This bit can be used to launch the DMA2D according to the parameters loaded in the various configuration registers
sourcepub fn susp(&self) -> BitReaderRaw<SUSP_A>
pub fn susp(&self) -> BitReaderRaw<SUSP_A>
Bit 1 - Suspend This bit can be used to suspend the current transfer. This bit is set and reset by software. It is automatically reset by hardware when the START bit is reset.
sourcepub fn abort(&self) -> BitReaderRaw<ABORT_A>
pub fn abort(&self) -> BitReaderRaw<ABORT_A>
Bit 2 - Abort This bit can be used to abort the current transfer. This bit is set by software and is automatically reset by hardware when the START bit is reset.
sourcepub fn teie(&self) -> BitReaderRaw<TEIE_A>
pub fn teie(&self) -> BitReaderRaw<TEIE_A>
Bit 8 - Transfer error interrupt enable This bit is set and cleared by software.
sourcepub fn tcie(&self) -> BitReaderRaw<TCIE_A>
pub fn tcie(&self) -> BitReaderRaw<TCIE_A>
Bit 9 - Transfer complete interrupt enable This bit is set and cleared by software.
sourcepub fn twie(&self) -> BitReaderRaw<TWIE_A>
pub fn twie(&self) -> BitReaderRaw<TWIE_A>
Bit 10 - Transfer watermark interrupt enable This bit is set and cleared by software.
sourcepub fn caeie(&self) -> BitReaderRaw<CAEIE_A>
pub fn caeie(&self) -> BitReaderRaw<CAEIE_A>
Bit 11 - CLUT access error interrupt enable This bit is set and cleared by software.
sourcepub fn ctcie(&self) -> BitReaderRaw<CTCIE_A>
pub fn ctcie(&self) -> BitReaderRaw<CTCIE_A>
Bit 12 - CLUT transfer complete interrupt enable This bit is set and cleared by software.
Methods from Deref<Target = R<CR_SPEC>>
sourcepub fn bits(&self) -> <REG as RegisterSpec>::Ux
pub fn bits(&self) -> <REG as RegisterSpec>::Ux
Reads raw bits from register.