[−][src]Struct spectrusty_core::chip::Ula3CtrlFlags
ZX Spectrum +2A / +3 secondary control flags.
Implementations
impl Ula3CtrlFlags
[src]
pub const EXT_PAGING: Ula3CtrlFlags
[src]
pub const PAGE_LAYOUT_MASK: Ula3CtrlFlags
[src]
pub const ROM_BANK_HI: Ula3CtrlFlags
[src]
pub const DISC_MOTOR: Ula3CtrlFlags
[src]
pub const PRINTER_STROBE: Ula3CtrlFlags
[src]
pub const PAGE_LAYOUT0: Ula3CtrlFlags
[src]
pub const PAGE_LAYOUT1: Ula3CtrlFlags
[src]
pub const PAGE_LAYOUT2: Ula3CtrlFlags
[src]
pub const PAGE_LAYOUT3: Ula3CtrlFlags
[src]
pub const fn empty() -> Ula3CtrlFlags
[src]
Returns an empty set of flags
pub const fn all() -> Ula3CtrlFlags
[src]
Returns the set containing all flags.
pub const fn bits(&self) -> u8
[src]
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u8) -> Option<Ula3CtrlFlags>
[src]
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u8) -> Ula3CtrlFlags
[src]
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: u8) -> Ula3CtrlFlags
[src]
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
[src]
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
[src]
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: Ula3CtrlFlags) -> bool
[src]
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: Ula3CtrlFlags) -> bool
[src]
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: Ula3CtrlFlags)
[src]
Inserts the specified flags in-place.
pub fn remove(&mut self, other: Ula3CtrlFlags)
[src]
Removes the specified flags in-place.
pub fn toggle(&mut self, other: Ula3CtrlFlags)
[src]
Toggles the specified flags in-place.
pub fn set(&mut self, other: Ula3CtrlFlags, value: bool)
[src]
Inserts or removes the specified flags depending on the passed value.
impl Ula3CtrlFlags
[src]
pub fn with_special_paging(self, paging: Ula3Paging) -> Self
[src]
Returns modified flags with the special paging enabled and its layout set to the specified value.
pub fn with_rom_page_bank_hi(mut self: Self, rom_bank: usize) -> Self
[src]
Returns modified flags with the special paging disabled and with the rom bank high flag set from
the rom_bank
bit1.
pub fn has_special_paging(self) -> bool
[src]
Returns true
if a special paging is enabled. Otherwise returns false
.
pub fn special_paging(self) -> Option<Ula3Paging>
[src]
Returns a special paging layout if it is enabled.
pub fn rom_page_bank_hi(self) -> usize
[src]
Returns a bit 1 value of rom bank index mapped at the first RAM page.
The complete rom page bank index can be obtained by bitwise ORing the returned value with the result from Ula128MemFlags::rom_page_bank.
pub fn is_disc_motor_on(self) -> bool
[src]
Returns true
if a disc motor bit is 1. Otherwise returns false
.
pub fn is_printer_strobe_on(self) -> bool
[src]
Returns true
if a printer strobe bit is 1. Otherwise returns false
.
Trait Implementations
impl Binary for Ula3CtrlFlags
[src]
impl BitAnd<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
type Output = Ula3CtrlFlags
The resulting type after applying the &
operator.
pub fn bitand(self, other: Ula3CtrlFlags) -> Ula3CtrlFlags
[src]
Returns the intersection between the two sets of flags.
impl BitAndAssign<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn bitand_assign(&mut self, other: Ula3CtrlFlags)
[src]
Disables all flags disabled in the set.
impl BitOr<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
type Output = Ula3CtrlFlags
The resulting type after applying the |
operator.
pub fn bitor(self, other: Ula3CtrlFlags) -> Ula3CtrlFlags
[src]
Returns the union of the two sets of flags.
impl BitOrAssign<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn bitor_assign(&mut self, other: Ula3CtrlFlags)
[src]
Adds the set of flags.
impl BitXor<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
type Output = Ula3CtrlFlags
The resulting type after applying the ^
operator.
pub fn bitxor(self, other: Ula3CtrlFlags) -> Ula3CtrlFlags
[src]
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn bitxor_assign(&mut self, other: Ula3CtrlFlags)
[src]
Toggles the set of flags.
impl Clone for Ula3CtrlFlags
[src]
pub fn clone(&self) -> Ula3CtrlFlags
[src]
pub fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for Ula3CtrlFlags
[src]
impl Debug for Ula3CtrlFlags
[src]
impl Default for Ula3CtrlFlags
[src]
pub fn default() -> Ula3CtrlFlags
[src]
impl Eq for Ula3CtrlFlags
[src]
impl Extend<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn extend<T: IntoIterator<Item = Ula3CtrlFlags>>(&mut self, iterator: T)
[src]
pub fn extend_one(&mut self, item: A)
[src]
pub fn extend_reserve(&mut self, additional: usize)
[src]
impl FromIterator<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn from_iter<T: IntoIterator<Item = Ula3CtrlFlags>>(
iterator: T
) -> Ula3CtrlFlags
[src]
iterator: T
) -> Ula3CtrlFlags
impl Hash for Ula3CtrlFlags
[src]
pub fn hash<__H: Hasher>(&self, state: &mut __H)
[src]
pub fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl LowerHex for Ula3CtrlFlags
[src]
impl Not for Ula3CtrlFlags
[src]
type Output = Ula3CtrlFlags
The resulting type after applying the !
operator.
pub fn not(self) -> Ula3CtrlFlags
[src]
Returns the complement of this set of flags.
impl Octal for Ula3CtrlFlags
[src]
impl Ord for Ula3CtrlFlags
[src]
pub fn cmp(&self, other: &Ula3CtrlFlags) -> Ordering
[src]
#[must_use]pub fn max(self, other: Self) -> Self
1.21.0[src]
#[must_use]pub fn min(self, other: Self) -> Self
1.21.0[src]
#[must_use]pub fn clamp(self, min: Self, max: Self) -> Self
1.50.0[src]
impl PartialEq<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn eq(&self, other: &Ula3CtrlFlags) -> bool
[src]
pub fn ne(&self, other: &Ula3CtrlFlags) -> bool
[src]
impl PartialOrd<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn partial_cmp(&self, other: &Ula3CtrlFlags) -> Option<Ordering>
[src]
pub fn lt(&self, other: &Ula3CtrlFlags) -> bool
[src]
pub fn le(&self, other: &Ula3CtrlFlags) -> bool
[src]
pub fn gt(&self, other: &Ula3CtrlFlags) -> bool
[src]
pub fn ge(&self, other: &Ula3CtrlFlags) -> bool
[src]
impl StructuralEq for Ula3CtrlFlags
[src]
impl StructuralPartialEq for Ula3CtrlFlags
[src]
impl Sub<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
type Output = Ula3CtrlFlags
The resulting type after applying the -
operator.
pub fn sub(self, other: Ula3CtrlFlags) -> Ula3CtrlFlags
[src]
Returns the set difference of the two sets of flags.
impl SubAssign<Ula3CtrlFlags> for Ula3CtrlFlags
[src]
pub fn sub_assign(&mut self, other: Ula3CtrlFlags)
[src]
Disables all flags enabled in the set.
impl UpperHex for Ula3CtrlFlags
[src]
Auto Trait Implementations
impl RefUnwindSafe for Ula3CtrlFlags
[src]
impl Send for Ula3CtrlFlags
[src]
impl Sync for Ula3CtrlFlags
[src]
impl Unpin for Ula3CtrlFlags
[src]
impl UnwindSafe for Ula3CtrlFlags
[src]
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
pub fn to_owned(&self) -> T
[src]
pub fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,