Struct sodaq_one::sercom::UART3

source · [−]

pub struct UART3<RX, TX, RTS, CTS> { /* fields omitted */ }

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

Expand description

UARTX represents the corresponding SERCOMX instance configured to act in the role of a UART Master. Objects of this type implement the HAL serial::Read, serial::Write traits.

This type is generic over any valid pad mapping where there is a defined “receive pin out transmit pin out” implementation.

Implementations

source

impl<RX, TX, RTS, CTS> UART3<RX, TX, RTS, CTS>

source

pub fn new<F, T>(
 clock: &Sercom3CoreClock,
 freq: F,
 sercom: SERCOM3,
 pm: &mut PM,
 padout: T
) -> UART3<RX, TX, RTS, CTS> where
 F: Into<Hertz>,
 T: Into<Padout<SERCOM3, RX, TX, RTS, CTS>>,
 Padout<SERCOM3, RX, TX, RTS, CTS>: RxpoTxpo,

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

Power on and configure SERCOMX to work as a UART Master operating with the specified frequency. The padout specifies which pins are bound to the RX, TX and optionally RTS and CTS functions.

You can use any tuple of two or four SercomXPadY instances for which there exists a From implementation for UARTXPadout.

source

pub fn free(self) -> (Padout<SERCOM3, RX, TX, RTS, CTS>, SERCOM3)

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

source

pub fn split(self) -> (UART3Tx<TX, RTS>, UART3Rx<RX, CTS>)

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

Splits the UART into transmit and receive halves

source

pub fn join(
tx: UART3Tx<TX, RTS>,
rx: UART3Rx<RX, CTS>
) -> UART3<RX, TX, RTS, CTS>

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

Combines transmit and receive halves back into a duplex UART

source

pub fn intenset<F>(&mut self, f: F) where
F: FnOnce(&mut W<u8, Reg<u8, _INTENSET>>),

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

source

pub fn intenclr<F>(&mut self, f: F) where
F: FnOnce(&mut W<u8, Reg<u8, _INTENCLR>>),

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

source

pub fn flags(&self) -> R<u16, Reg<u16, _STATUS>>

👎 Deprecated since 0.13.0:

The sercom::v1::uart module is deprecated, and will be removed in a subsequent release. Please use the sercom::v2::uart module instead.

Trait Implementations

source

impl<RX, TX, RTS, CTS> Read<u8> for UART3<RX, TX, RTS, CTS>

type Error = ()

Read error

source

pub fn read(
&mut self
) -> Result<u8, Error<<UART3<RX, TX, RTS, CTS> as Read<u8>>::Error>>

Reads a single word from the serial interface

source

impl<RX, TX, RTS, CTS> Write for UART3<RX, TX, RTS, CTS>

source

pub fn write_str(&mut self, s: &str) -> Result<(), Error>

Writes a string slice into this writer, returning whether the write succeeded. Read more

1.1.0 · source

fn write_char(&mut self, c: char) -> Result<(), Error>

Writes a char into this writer, returning whether the write succeeded. Read more

1.0.0 · source

fn write_fmt(&mut self, args: Arguments<'_>) -> Result<(), Error>

Glue for usage of the write! macro with implementors of this trait. Read more

source

impl<RX, TX, RTS, CTS> Write<u8> for UART3<RX, TX, RTS, CTS>

type Error = ()

Write error

source

pub fn write(
&mut self,
word: u8
) -> Result<(), Error<<UART3<RX, TX, RTS, CTS> as Write<u8>>::Error>>

Writes a single word to the serial interface

source

pub fn flush(
&mut self
) -> Result<(), Error<<UART3<RX, TX, RTS, CTS> as Write<u8>>::Error>>

Ensures that none of the previously written words are still buffered

source

impl<RX, TX, RTS, CTS> Default<u8> for UART3<RX, TX, RTS, CTS>

Auto Trait Implementations

impl<RX, TX, RTS, CTS> RefUnwindSafe for UART3<RX, TX, RTS, CTS> where
 CTS: RefUnwindSafe,
 RTS: RefUnwindSafe,
 RX: RefUnwindSafe,
 TX: RefUnwindSafe,

impl<RX, TX, RTS, CTS> Send for UART3<RX, TX, RTS, CTS> where
 CTS: Send,
 RTS: Send,
 RX: Send,
 TX: Send,

impl<RX, TX, RTS, CTS> !Sync for UART3<RX, TX, RTS, CTS>

impl<RX, TX, RTS, CTS> Unpin for UART3<RX, TX, RTS, CTS> where
 CTS: Unpin,
 RTS: Unpin,
 RX: Unpin,
 TX: Unpin,

impl<RX, TX, RTS, CTS> UnwindSafe for UART3<RX, TX, RTS, CTS> where
 CTS: UnwindSafe,
 RTS: UnwindSafe,
 RX: UnwindSafe,
 TX: UnwindSafe,

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

source

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

source

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

source

pub fn from(t: T) -> T

Performs the conversion.

source

impl<T, U> Into for T where
U: From<T>,

source

pub fn into(self) -> U

Performs the conversion.

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

source

pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

source

pub fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<S, Word> Write<Word> for S where
S: Default<Word>,
Word: Clone,

type Error = <S as Write<Word>>::Error

The type of error that can occur when writing

pub fn bwrite_all(
&mut self,
buffer: &[Word]
) -> Result<(), <S as Write<Word>>::Error>

Writes a slice, blocking until everything has been written Read more

pub fn bflush(&mut self) -> Result<(), <S as Write<Word>>::Error>

Block until the serial interface has sent all buffered words

Struct sodaq_one::sercom::UART3

Implementations

impl<RX, TX, RTS, CTS> UART3<RX, TX, RTS, CTS>

pub fn new<F, T>( clock: &Sercom3CoreClock, freq: F, sercom: SERCOM3, pm: &mut PM, padout: T) -> UART3<RX, TX, RTS, CTS> where F: Into<Hertz>, T: Into<Padout<SERCOM3, RX, TX, RTS, CTS>>, Padout<SERCOM3, RX, TX, RTS, CTS>: RxpoTxpo,

pub fn free(self) -> (Padout<SERCOM3, RX, TX, RTS, CTS>, SERCOM3)

pub fn split(self) -> (UART3Tx<TX, RTS>, UART3Rx<RX, CTS>)

pub fn join( tx: UART3Tx<TX, RTS>, rx: UART3Rx<RX, CTS>) -> UART3<RX, TX, RTS, CTS>

pub fn intenset<F>(&mut self, f: F) where F: FnOnce(&mut W<u8, Reg<u8, _INTENSET>>),

pub fn intenclr<F>(&mut self, f: F) where F: FnOnce(&mut W<u8, Reg<u8, _INTENCLR>>),

pub fn flags(&self) -> R<u16, Reg<u16, _STATUS>>

Trait Implementations

impl<RX, TX, RTS, CTS> Read<u8> for UART3<RX, TX, RTS, CTS>

type Error = ()

pub fn read( &mut self) -> Result<u8, Error<<UART3<RX, TX, RTS, CTS> as Read<u8>>::Error>>

impl<RX, TX, RTS, CTS> Write for UART3<RX, TX, RTS, CTS>

pub fn write_str(&mut self, s: &str) -> Result<(), Error>

fn write_char(&mut self, c: char) -> Result<(), Error>

fn write_fmt(&mut self, args: Arguments<'_>) -> Result<(), Error>

impl<RX, TX, RTS, CTS> Write<u8> for UART3<RX, TX, RTS, CTS>

type Error = ()

pub fn write( &mut self, word: u8) -> Result<(), Error<<UART3<RX, TX, RTS, CTS> as Write<u8>>::Error>>

pub fn flush( &mut self) -> Result<(), Error<<UART3<RX, TX, RTS, CTS> as Write<u8>>::Error>>

impl<RX, TX, RTS, CTS> Default<u8> for UART3<RX, TX, RTS, CTS>

Auto Trait Implementations

impl<RX, TX, RTS, CTS> RefUnwindSafe for UART3<RX, TX, RTS, CTS> where CTS: RefUnwindSafe, RTS: RefUnwindSafe, RX: RefUnwindSafe, TX: RefUnwindSafe,

impl<RX, TX, RTS, CTS> Send for UART3<RX, TX, RTS, CTS> where CTS: Send, RTS: Send, RX: Send, TX: Send,

impl<RX, TX, RTS, CTS> !Sync for UART3<RX, TX, RTS, CTS>

impl<RX, TX, RTS, CTS> Unpin for UART3<RX, TX, RTS, CTS> where CTS: Unpin, RTS: Unpin, RX: Unpin, TX: Unpin,

impl<RX, TX, RTS, CTS> UnwindSafe for UART3<RX, TX, RTS, CTS> where CTS: UnwindSafe, RTS: UnwindSafe, RX: UnwindSafe, TX: UnwindSafe,

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<S, Word> Write<Word> for S where S: Default<Word>, Word: Clone,

type Error = <S as Write<Word>>::Error

pub fn bwrite_all( &mut self, buffer: &[Word]) -> Result<(), <S as Write<Word>>::Error>

pub fn bflush(&mut self) -> Result<(), <S as Write<Word>>::Error>

pub fn new<F, T>(
clock: &Sercom3CoreClock,
freq: F,
sercom: SERCOM3,
pm: &mut PM,
padout: T
) -> UART3<RX, TX, RTS, CTS> where
F: Into<Hertz>,
T: Into<Padout<SERCOM3, RX, TX, RTS, CTS>>,
Padout<SERCOM3, RX, TX, RTS, CTS>: RxpoTxpo,

pub fn join(
tx: UART3Tx<TX, RTS>,
rx: UART3Rx<RX, CTS>
) -> UART3<RX, TX, RTS, CTS>

pub fn intenset<F>(&mut self, f: F) where
F: FnOnce(&mut W<u8, Reg<u8, _INTENSET>>),

pub fn intenclr<F>(&mut self, f: F) where
F: FnOnce(&mut W<u8, Reg<u8, _INTENCLR>>),

pub fn read(
&mut self
) -> Result<u8, Error<<UART3<RX, TX, RTS, CTS> as Read<u8>>::Error>>

pub fn write(
&mut self,
word: u8
) -> Result<(), Error<<UART3<RX, TX, RTS, CTS> as Write<u8>>::Error>>

pub fn flush(
&mut self
) -> Result<(), Error<<UART3<RX, TX, RTS, CTS> as Write<u8>>::Error>>

impl<RX, TX, RTS, CTS> RefUnwindSafe for UART3<RX, TX, RTS, CTS> where
CTS: RefUnwindSafe,
RTS: RefUnwindSafe,
RX: RefUnwindSafe,
TX: RefUnwindSafe,

impl<RX, TX, RTS, CTS> Send for UART3<RX, TX, RTS, CTS> where
CTS: Send,
RTS: Send,
RX: Send,
TX: Send,

impl<RX, TX, RTS, CTS> Unpin for UART3<RX, TX, RTS, CTS> where
CTS: Unpin,
RTS: Unpin,
RX: Unpin,
TX: Unpin,

impl<RX, TX, RTS, CTS> UnwindSafe for UART3<RX, TX, RTS, CTS> where
CTS: UnwindSafe,
RTS: UnwindSafe,
RX: UnwindSafe,
TX: UnwindSafe,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

impl<S, Word> Write<Word> for S where
S: Default<Word>,
Word: Clone,

pub fn bwrite_all(
&mut self,
buffer: &[Word]
) -> Result<(), <S as Write<Word>>::Error>