1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
//! Module with the self-pipe pattern.
//!
//! One of the common patterns around signals is to have a pipe with both ends in the same program.
//! Whenever there's a signal, the signal handler writes to the write end. The application then can
//! handle the read end.
//!
//! This has two advantages. First, the real signal action moves outside of the signal handler
//! where there are a lot less restrictions. Second, it fits nicely in all kinds of asynchronous
//! loops and has less chance of race conditions.
//!
//! This module offers premade functions for the write end (and doesn't insist that it must be a
//! pipe ‒ anything that can be `sent` to is fine ‒ sockets too, therefore `UnixStream::pair` is a
//! good candidate).
//!
//! If you want to integrate with some asynchronous library, plugging streams from `mio-uds` or
//! `tokio-uds` libraries should work.
//!
//! If it looks too low-level for your needs, the [`iterator`](iterator/) module contains some
//! higher-lever interface that also uses a self-pipe pattern under the hood.
//!
//! # Correct order of handling
//!
//! A care needs to be taken to avoid race conditions, especially when handling the same signal in
//! a loop. Specifically, another signal might come when the action for the previous signal is
//! being taken. The correct order is first to clear the content of the pipe (read some/all data
//! from it) and then take the action. This way a spurious wakeup can happen (the pipe could wake
//! up even when no signal came after the signal was taken, because ‒ it arrived between cleaning
//! the pipe and taking the action). Note that some OS primitives (eg. `select`) suffer from
//! spurious wakeups themselves (they can claim a FD is readable when it is not true) and blocking
//! `read` might return prematurely (with eg. `EINTR`).
//!
//! The reverse order of first taking the action and then clearing the pipe might lose signals,
//! which is usually worse.
//!
//! This is not a problem with blocking on reading from the pipe (because both the blocking and
//! cleaning is the same action), but in case of asynchronous handling it matters.
//!
//! If you want to combine setting some flags with a self-pipe pattern, the flag needs to be set
//! first, then the pipe written. On the read end, first the pipe needs to be cleaned, then the
//! flag and then the action taken. This is what the [`Signals`](../iterator/struct.Signals.html)
//! structure does internally.
//!
//! # Write collating
//!
//! While unlikely if handled correctly, it is possible the write end is full when a signal comes.
//! In such case the signal handler simply does nothing. If the write end is full, the read end is
//! readable and therefore will wake up. On the other hand, blocking in the signal handler would
//! definitely be a bad idea.
//!
//! However, this also means the number of bytes read from the end might be lower than the number
//! of signals that arrived. This should not generally be a problem, since the OS already collates
//! signals of the same kind together.
//!
//! # Examples
//!
//! This example waits for at last one `SIGUSR1` signal to come before continuing (and
//! terminating). It sends the signal to itself, so it correctly terminates.
//!
//! ```rust
//! extern crate libc;
//! extern crate signal_hook;
//!
//! use std::io::{Error, Read};
//! use std::os::unix::net::UnixStream;
//!
//! fn main() -> Result<(), Error> {
//! let (mut read, write) = UnixStream::pair()?;
//! signal_hook::pipe::register(signal_hook::SIGUSR1, write)?;
//! // This will write into the pipe write end through the signal handler
//! unsafe { libc::kill(libc::getpid(), signal_hook::SIGUSR1) };
//! let mut buff = [0];
//! read.read_exact(&mut buff)?;
//! println!("Happily terminating");
//! Ok(())
//! }
use std::io::Error;
use std::os::unix::io::{AsRawFd, RawFd};
use libc::{self, c_int};
use SigId;
pub(crate) fn wake(pipe: RawFd) {
unsafe {
// This sends some data into the pipe.
//
// There are two tricks:
// * First, the crazy cast. The first part turns reference into pointer. The second part
// turns pointer to u8 into a pointer to void, which is what send requires.
// * Second, we ignore errors, on purpose. We don't have any means to handling them. The
// two conceivable errors are EBADFD, if someone passes a non-existent file descriptor or
// if it is closed. The second is EAGAIN, in which case the pipe is full ‒ there were
// many signals, but the reader didn't have time to read the data yet. It'll still get
// woken up, so not fitting another letter in it is fine.
libc::send(pipe, b"X" as *const _ as *const _, 1, libc::MSG_DONTWAIT);
}
}
/// Registers a write to a self-pipe whenever there's the signal.
///
/// In this case, the pipe is taken as the `RawFd`. It is still the caller's responsibility to
/// close it.
pub fn register_raw(signal: c_int, pipe: RawFd) -> Result<SigId, Error> {
unsafe { ::register(signal, move || wake(pipe)) }
}
/// Registers a write to a self-pipe whenever there's the signal.
///
/// The ownership of pipe is taken and will be closed whenever the created action is unregistered.
///
/// Note that if you want to register the same pipe for multiple signals, there's `try_clone`
/// method on many unix socket primitives.
pub fn register<P>(signal: c_int, pipe: P) -> Result<SigId, Error>
where
P: AsRawFd + Send + Sync + 'static,
{
let action = move || wake(pipe.as_raw_fd());
unsafe { ::register(signal, action) }
}