Struct sgxs::sigstruct::Miscselect
source · #[repr(C)]pub struct Miscselect { /* private fields */ }
Implementations§
source§impl Miscselect
impl Miscselect
pub const EXINFO: Miscselect = _
sourcepub const fn empty() -> Miscselect
pub const fn empty() -> Miscselect
Returns an empty set of flags.
sourcepub const fn all() -> Miscselect
pub const fn all() -> Miscselect
Returns the set containing all flags.
sourcepub const fn from_bits(bits: u32) -> Option<Miscselect>
pub const fn from_bits(bits: u32) -> Option<Miscselect>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u32) -> Miscselect
pub const fn from_bits_truncate(bits: u32) -> Miscselect
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u32) -> Miscselect
pub const unsafe fn from_bits_unchecked(bits: u32) -> Miscselect
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
§Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Miscselect) -> bool
pub const fn intersects(&self, other: Miscselect) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Miscselect) -> bool
pub const fn contains(&self, other: Miscselect) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn insert(&mut self, other: Miscselect)
pub fn insert(&mut self, other: Miscselect)
Inserts the specified flags in-place.
sourcepub fn remove(&mut self, other: Miscselect)
pub fn remove(&mut self, other: Miscselect)
Removes the specified flags in-place.
sourcepub fn toggle(&mut self, other: Miscselect)
pub fn toggle(&mut self, other: Miscselect)
Toggles the specified flags in-place.
sourcepub fn set(&mut self, other: Miscselect, value: bool)
pub fn set(&mut self, other: Miscselect, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Miscselect) -> Miscselect
pub const fn intersection(self, other: Miscselect) -> Miscselect
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Miscselect) -> Miscselect
pub const fn union(self, other: Miscselect) -> Miscselect
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Miscselect) -> Miscselect
pub const fn difference(self, other: Miscselect) -> Miscselect
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Miscselect) -> Miscselect
pub const fn symmetric_difference(self, other: Miscselect) -> Miscselect
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Miscselect
pub const fn complement(self) -> Miscselect
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations§
source§impl Binary for Miscselect
impl Binary for Miscselect
source§impl BitAnd for Miscselect
impl BitAnd for Miscselect
source§fn bitand(self, other: Miscselect) -> Miscselect
fn bitand(self, other: Miscselect) -> Miscselect
Returns the intersection between the two sets of flags.
§type Output = Miscselect
type Output = Miscselect
&
operator.source§impl BitAndAssign for Miscselect
impl BitAndAssign for Miscselect
source§fn bitand_assign(&mut self, other: Miscselect)
fn bitand_assign(&mut self, other: Miscselect)
Disables all flags disabled in the set.
source§impl BitOr for Miscselect
impl BitOr for Miscselect
source§fn bitor(self, other: Miscselect) -> Miscselect
fn bitor(self, other: Miscselect) -> Miscselect
Returns the union of the two sets of flags.
§type Output = Miscselect
type Output = Miscselect
|
operator.source§impl BitOrAssign for Miscselect
impl BitOrAssign for Miscselect
source§fn bitor_assign(&mut self, other: Miscselect)
fn bitor_assign(&mut self, other: Miscselect)
Adds the set of flags.
source§impl BitXor for Miscselect
impl BitXor for Miscselect
source§fn bitxor(self, other: Miscselect) -> Miscselect
fn bitxor(self, other: Miscselect) -> Miscselect
Returns the left flags, but with all the right flags toggled.
§type Output = Miscselect
type Output = Miscselect
^
operator.source§impl BitXorAssign for Miscselect
impl BitXorAssign for Miscselect
source§fn bitxor_assign(&mut self, other: Miscselect)
fn bitxor_assign(&mut self, other: Miscselect)
Toggles the set of flags.
source§impl Clone for Miscselect
impl Clone for Miscselect
source§fn clone(&self) -> Miscselect
fn clone(&self) -> Miscselect
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for Miscselect
impl Debug for Miscselect
source§impl Default for Miscselect
impl Default for Miscselect
source§fn default() -> Miscselect
fn default() -> Miscselect
source§impl Extend<Miscselect> for Miscselect
impl Extend<Miscselect> for Miscselect
source§fn extend<T>(&mut self, iterator: T)where
T: IntoIterator<Item = Miscselect>,
fn extend<T>(&mut self, iterator: T)where
T: IntoIterator<Item = Miscselect>,
source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)source§impl FromIterator<Miscselect> for Miscselect
impl FromIterator<Miscselect> for Miscselect
source§fn from_iter<T>(iterator: T) -> Miscselectwhere
T: IntoIterator<Item = Miscselect>,
fn from_iter<T>(iterator: T) -> Miscselectwhere
T: IntoIterator<Item = Miscselect>,
source§impl Hash for Miscselect
impl Hash for Miscselect
source§impl LowerHex for Miscselect
impl LowerHex for Miscselect
source§impl Not for Miscselect
impl Not for Miscselect
source§fn not(self) -> Miscselect
fn not(self) -> Miscselect
Returns the complement of this set of flags.
§type Output = Miscselect
type Output = Miscselect
!
operator.source§impl Octal for Miscselect
impl Octal for Miscselect
source§impl Ord for Miscselect
impl Ord for Miscselect
source§fn cmp(&self, other: &Miscselect) -> Ordering
fn cmp(&self, other: &Miscselect) -> Ordering
1.21.0 · source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
source§impl PartialEq for Miscselect
impl PartialEq for Miscselect
source§fn eq(&self, other: &Miscselect) -> bool
fn eq(&self, other: &Miscselect) -> bool
self
and other
values to be equal, and is used
by ==
.source§impl PartialOrd for Miscselect
impl PartialOrd for Miscselect
source§fn partial_cmp(&self, other: &Miscselect) -> Option<Ordering>
fn partial_cmp(&self, other: &Miscselect) -> Option<Ordering>
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
self
and other
) and is used by the <=
operator. Read moresource§impl Sub for Miscselect
impl Sub for Miscselect
source§fn sub(self, other: Miscselect) -> Miscselect
fn sub(self, other: Miscselect) -> Miscselect
Returns the set difference of the two sets of flags.
§type Output = Miscselect
type Output = Miscselect
-
operator.source§impl SubAssign for Miscselect
impl SubAssign for Miscselect
source§fn sub_assign(&mut self, other: Miscselect)
fn sub_assign(&mut self, other: Miscselect)
Disables all flags enabled in the set.