seer_core/dns/

resolver.rs

//! DNS resolution over hickory-resolver.
//!
//! Retry boundary (deliberate): unlike the WHOIS/RDAP clients, this module
//! does NOT wrap queries in [`crate::retry::RetryPolicy`]. hickory-resolver
//! already performs its own retransmission (`opts.attempts` below) against
//! the configured nameserver within the per-query timeout; stacking an outer
//! retry loop on top would multiply worst-case latency without improving
//! resolution odds. If a retry knob is ever needed here, tune
//! `ResolverOpts::attempts` rather than adding a wrapper.

use std::net::IpAddr;
use std::str::FromStr;
use std::sync::Arc;
use std::time::Duration;

use hickory_resolver::config::{
    NameServerConfig, ResolveHosts, ResolverConfig, ResolverOpts, ServerOrderingStrategy, GOOGLE,
};
use hickory_resolver::net::runtime::TokioRuntimeProvider;
use hickory_resolver::net::NetError;
use hickory_resolver::proto::dnssec::PublicKey;
use hickory_resolver::proto::rr::rdata::CAA;
use hickory_resolver::proto::rr::{RData as HickoryRData, RecordType as HickoryRecordType};
use hickory_resolver::TokioResolver;
use tracing::{debug, instrument};

use super::nameserver::{NameserverProtocol, NameserverSpec};
use super::records::{DnsRecord, RecordData, RecordType};
use crate::error::{Result, SeerError};
use crate::validation::{normalize_domain, normalize_host};

/// Convert a DNS lookup result, treating "no records found" as an empty vec
/// rather than an error. This is correct DNS behavior — the absence of a
/// record type for a domain is a valid response (NODATA), not a failure.
fn dns_lookup_or_empty<T>(
    result: std::result::Result<T, NetError>,
    record_type: &str,
) -> Result<Option<T>> {
    match result {
        Ok(response) => Ok(Some(response)),
        Err(e) if e.is_no_records_found() => Ok(None),
        Err(e) => Err(SeerError::DnsError(format!(
            "{} lookup failed: {}",
            record_type, e
        ))),
    }
}

/// Default timeout for DNS queries (5 seconds).
/// DNS is typically fast; longer timeouts indicate network issues or unreachable servers.
const DEFAULT_TIMEOUT: Duration = Duration::from_secs(5);

/// Apply seer's standard resolver options.
///
/// Extracted from [`build_resolver`] so the option set is assertable without
/// standing up a resolver (hickory exposes no getter for a built resolver's
/// options), and shared with `net.rs`'s SSRF fallback resolver so the two
/// cannot drift — they previously carried hand-copied option sets and the
/// server-ordering fix below would have landed in only one of them.
pub(crate) fn apply_standard_opts(opts: &mut ResolverOpts, timeout: Duration) {
    opts.timeout = timeout;
    opts.attempts = 2;
    opts.use_hosts_file = ResolveHosts::Never;
    // Pin the query order to the configured list instead of hickory's default
    // `QueryStatistics`. The default orders servers by observed performance,
    // which is the right call for a long-lived process but meaningless in a
    // short-lived CLI run that has collected no statistics yet — leaving the
    // effective order arbitrary.
    //
    // That mattered because the default upstream group (`GOOGLE`) carries two
    // IPv4 and two IPv6 addresses, and hickory queries `num_concurrent_reqs`
    // (2) of them in parallel. On a host advertising an IPv6 default route
    // with no working IPv6 transit — RA-advertised IPv6 that black-holes,
    // common on consumer networks — a pair that happened to be both IPv6 sent
    // into the void and burned the full per-query timeout. Roughly one run in
    // six stalled 5s, and `seer doctor` reported an outright DNS failure
    // because its probe deadline equals that timeout, leaving no budget to
    // fail over.
    //
    // With the order pinned, the parallel pair is deterministically the two
    // IPv4 servers. IPv6 entries stay in the list and remain reachable as
    // fallback: on a genuinely IPv6-only host the IPv4 sends fail immediately
    // with ENETUNREACH rather than timing out, so failover stays fast.
    opts.server_ordering_strategy = ServerOrderingStrategy::UserProvidedOrder;
}

/// Build a TokioResolver pre-configured with the given upstream config and
/// our standard options (timeout, retries, no hosts-file consultation).
///
/// Build only fails when hickory cannot construct its rustls TLS context
/// (needed for DoT/DoH upstreams). With the `webpki-roots` feature supplying
/// the root store, that construction is infallible in practice, but the
/// fallible signature is kept honest so a future root-store change degrades
/// to a typed error instead of a panic.
fn build_resolver(config: ResolverConfig, timeout: Duration) -> Result<TokioResolver> {
    let mut builder = TokioResolver::builder_with_config(config, TokioRuntimeProvider::default());
    apply_standard_opts(builder.options_mut(), timeout);
    builder
        .build()
        .map_err(|e| SeerError::DnsError(format!("failed to construct DNS resolver: {}", e)))
}

/// Build the default (Google DNS over UDP/TCP) resolver.
///
/// The `expect` expresses an invariant rather than laziness: with the
/// `webpki-roots` root store compiled in, hickory's TLS-context construction
/// (the only fallible step in [`build_resolver`]) cannot fail, and the
/// infallible `new()`/`with_timeout()` constructors predate DoT/DoH support.
fn build_default_resolver(timeout: Duration) -> TokioResolver {
    build_resolver(ResolverConfig::udp_and_tcp(&GOOGLE), timeout)
        .expect("default resolver build cannot fail with the bundled webpki root store")
}

/// Upstream config pinned to the single server `ip:port` — UDP only, or UDP
/// with TCP fallback (for answers that may truncate).
pub(crate) fn single_server_config(ip: IpAddr, port: u16, tcp_fallback: bool) -> ResolverConfig {
    let mut ns = if tcp_fallback {
        NameServerConfig::udp_and_tcp(ip)
    } else {
        NameServerConfig::udp(ip)
    };
    for connection in &mut ns.connections {
        connection.port = port;
    }
    let mut config = ResolverConfig::from_parts(None, vec![], vec![]);
    config.add_name_server(ns);
    config
}

/// Google DNS (UDP+TCP), or the pinned UDP `upstream` that the DNSSEC and
/// delegation checkers' `#[cfg(test)]` seams point at a loopback mock.
pub(crate) fn google_or_pinned(upstream: Option<(IpAddr, u16)>) -> ResolverConfig {
    match upstream {
        None => ResolverConfig::udp_and_tcp(&GOOGLE),
        Some((ip, port)) => single_server_config(ip, port, false),
    }
}

/// Appends the root dot so hickory treats `name` as fully qualified (no
/// search-list expansion).
pub(crate) fn fqdn(name: &str) -> String {
    if name.ends_with('.') {
        name.to_string()
    } else {
        format!("{name}.")
    }
}

/// Build the hickory upstream config for a parsed nameserver spec and its
/// resolved (and already SSRF-validated) addresses.
///
/// One `NameServerConfig` is added per IP (IPv4 first, see below), all
/// speaking the spec's protocol on the spec's port. For DoT/DoH the TLS
/// server name is the spec's host — the hostname when one was given, or the
/// IP literal itself (verified against the certificate's IP SANs, which the
/// major public resolvers carry). `port_override` is the `#[cfg(test)]`
/// mock-server seam and is always `None` in production.
fn build_upstream_config(
    spec: &NameserverSpec,
    ips: &[IpAddr],
    port_override: Option<u16>,
) -> ResolverConfig {
    let mut config = ResolverConfig::from_parts(None, vec![], vec![]);
    let port = port_override.unwrap_or(spec.port);
    // IPv4 before IPv6, each family keeping its resolved order — the same
    // shape as the default `GOOGLE` group. The pool is pinned to
    // `UserProvidedOrder` (see `apply_standard_opts`) and races its first
    // `num_concurrent_reqs` (2) entries under one deadline equal to the
    // per-query timeout, so list order decides which addresses get tried.
    // hickory's `lookup_ip` returns AAAA before A, so a dual-stack hostname
    // (`dns.google`, `https://cloudflare-dns.com/dns-query`) led with two
    // IPv6 entries; with black-holed IPv6 transit they spent the whole
    // deadline and the IPv4 entries were never reached. IPv6 stays as
    // fallback: on an IPv6-only host IPv4 sends fail fast (ENETUNREACH).
    let ordered = ips
        .iter()
        .filter(|ip| ip.is_ipv4())
        .chain(ips.iter().filter(|ip| ip.is_ipv6()));
    for ip in ordered {
        let mut ns = match spec.protocol {
            NameserverProtocol::Udp => NameServerConfig::udp(*ip),
            NameserverProtocol::Tls => NameServerConfig::tls(*ip, Arc::from(spec.tls_name())),
            NameserverProtocol::Https => NameServerConfig::https(
                *ip,
                Arc::from(spec.tls_name()),
                spec.path.as_deref().map(Arc::from),
            ),
        };
        for connection in &mut ns.connections {
            connection.port = port;
        }
        config.add_name_server(ns);
    }
    config
}

/// DNS resolver for querying various record types.
///
/// Uses Google DNS (8.8.8.8) by default, but supports custom nameservers
/// over plain UDP, DNS over TLS (`tls://`), and DNS over HTTPS (`https://`)
/// — see [`NameserverSpec`](super::NameserverSpec) for the accepted forms.
/// The default resolver is cached and reused across queries to avoid
/// repeated initialization overhead.
#[derive(Clone)]
pub struct DnsResolver {
    timeout: Duration,
    /// Cached default resolver (Google DNS). Reused across all queries
    /// that don't specify a custom nameserver.
    default_resolver: TokioResolver,
    /// Port override for custom-nameserver queries. Always `None` in
    /// production (the port comes from the parsed [`NameserverSpec`]);
    /// settable only through the `#[cfg(test)]` seam so mock-server tests
    /// can bind an ephemeral local port.
    port_override: Option<u16>,
    /// When true, skips the SSRF/reserved-IP validation on custom
    /// nameservers so tests can point the resolver at a 127.0.0.1 fixture.
    /// Not settable outside `#[cfg(test)]` builds — production paths always
    /// validate.
    allow_private_hosts: bool,
    /// Test-only: nameserver spec used when a caller passes `None`, so code
    /// that always queries the default upstream (posture, CAA) can be pointed
    /// at the loopback fixture. Absent from release builds.
    #[cfg(test)]
    test_default_nameserver: Option<String>,
}

impl std::fmt::Debug for DnsResolver {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        f.debug_struct("DnsResolver")
            .field("timeout", &self.timeout)
            .finish()
    }
}

impl Default for DnsResolver {
    fn default() -> Self {
        Self::new()
    }
}

impl DnsResolver {
    /// Creates a new DNS resolver with default settings.
    pub fn new() -> Self {
        Self {
            timeout: DEFAULT_TIMEOUT,
            default_resolver: build_default_resolver(DEFAULT_TIMEOUT),
            port_override: None,
            allow_private_hosts: false,
            #[cfg(test)]
            test_default_nameserver: None,
        }
    }

    /// Builds a resolver honoring `~/.seer/config.toml` settings.
    ///
    /// Reads `timeouts.dns_secs` (already clamped to 1–60s by
    /// [`crate::config::SeerConfig::load`]). Sugar over
    /// [`DnsResolver::with_timeout`] — equivalent to
    /// `DnsResolver::new().with_timeout(config.dns_timeout())`.
    ///
    /// The `nameserver` config key is deliberately NOT applied here: the
    /// resolver takes the nameserver per-query (see [`DnsResolver::resolve`]),
    /// so callers thread `config.nameserver` at the call site where it can be
    /// overridden per-invocation.
    pub fn from_config(config: &crate::config::SeerConfig) -> Self {
        Self::new().with_timeout(config.dns_timeout())
    }

    /// Test-only: the per-query timeout, for asserting config plumbing.
    #[cfg(test)]
    pub(crate) fn timeout(&self) -> Duration {
        self.timeout
    }

    /// Test-only: allow custom nameservers on loopback/private hosts (mock servers).
    #[cfg(test)]
    pub(crate) fn allowing_private_hosts(mut self) -> Self {
        self.allow_private_hosts = true;
        self
    }

    /// Test-only: query custom nameservers on a non-standard port (mock
    /// servers bind ephemeral ports).
    #[cfg(test)]
    pub(crate) fn with_port(mut self, port: u16) -> Self {
        self.port_override = Some(port);
        self
    }

    /// Test-only: send queries that name no nameserver to `nameserver`
    /// instead of the cached default (Google) resolver.
    #[cfg(test)]
    pub(crate) fn with_default_nameserver(mut self, nameserver: &str) -> Self {
        self.test_default_nameserver = Some(nameserver.to_string());
        self
    }

    /// The nameserver a query actually uses: the caller's choice, or (in test
    /// builds only) the fixture default installed by
    /// [`with_default_nameserver`](Self::with_default_nameserver).
    #[cfg(test)]
    fn effective_nameserver<'a>(&'a self, nameserver: Option<&'a str>) -> Option<&'a str> {
        nameserver.or(self.test_default_nameserver.as_deref())
    }

    #[cfg(not(test))]
    fn effective_nameserver<'a>(&self, nameserver: Option<&'a str>) -> Option<&'a str> {
        nameserver
    }

    /// Sets the timeout for DNS queries.
    ///
    /// The default is 5 seconds, which is sufficient for most DNS queries.
    pub fn with_timeout(mut self, timeout: Duration) -> Self {
        self.timeout = timeout;
        self.default_resolver = build_default_resolver(timeout);
        self
    }

    async fn create_custom_resolver(&self, nameserver: &str) -> Result<TokioResolver> {
        // Parse the spec first: bare IP/host (UDP), tls:// (DoT), https://
        // (DoH). Every surface (CLI, REPL, config.toml, py/REST/MCP) funnels
        // its opaque nameserver string through here, so this one parse gives
        // all of them every transport.
        let spec = NameserverSpec::parse(nameserver)?;

        // Accept either a literal IP or a hostname. For hostnames, resolve
        // via the default (Google DNS) hickory resolver so we do not depend
        // on the OS resolver — that is the same fallback principle as the
        // SSL probe fix: when the local system resolver is broken (split
        // DNS, broken router, container netns), hickory still reaches the
        // public name servers and the user-supplied authoritative server
        // is still usable. DoT/DoH hostnames bootstrap-resolve through this
        // exact same path (the TLS handshake still verifies the hostname).
        let ips: Vec<IpAddr> = if let Ok(ip) = spec.host.parse::<IpAddr>() {
            vec![ip]
        } else {
            let response = self
                .default_resolver
                .lookup_ip(spec.host.as_str())
                .await
                .map_err(|e| {
                    SeerError::DnsError(format!(
                        "failed to resolve nameserver hostname {}: {}",
                        spec.host, e
                    ))
                })?;
            let resolved: Vec<IpAddr> = response.iter().collect();
            if resolved.is_empty() {
                return Err(SeerError::DnsError(format!(
                    "nameserver {} did not resolve to any addresses",
                    spec.host
                )));
            }
            resolved
        };

        // SSRF protection: reject private/reserved IPs — whether supplied
        // literally or returned by name resolution, and identically for
        // UDP, tls://, and https:// specs. Without this, a hostname under
        // attacker control could point at internal infra.
        // `allow_private_hosts` is only settable via the `#[cfg(test)]`
        // seam; production builds always validate.
        if !self.allow_private_hosts {
            for ip in &ips {
                if let Some(reason) = crate::validation::describe_reserved_ip(ip) {
                    return Err(SeerError::DnsError(format!(
                        "nameserver {} blocked: {}",
                        nameserver, reason
                    )));
                }
            }
        }

        build_resolver(
            build_upstream_config(&spec, &ips, self.port_override),
            self.timeout,
        )
    }

    /// Resolves DNS records for a domain.
    ///
    /// # Arguments
    /// * `domain` - The domain name to query
    /// * `record_type` - The type of DNS record to look up (A, AAAA, MX, etc.)
    /// * `nameserver` - Optional custom nameserver spec; uses Google DNS if
    ///   None. Accepts a bare IP/hostname with optional port (UDP),
    ///   `tls://host[:port]` (DNS over TLS), or `https://host[:port][/path]`
    ///   (DNS over HTTPS) — see [`NameserverSpec`](super::NameserverSpec)
    #[instrument(skip(self), fields(domain = %domain, record_type = %record_type))]
    pub async fn resolve(
        &self,
        domain: &str,
        record_type: RecordType,
        nameserver: Option<&str>,
    ) -> Result<Vec<DnsRecord>> {
        // Reuse the cached default resolver when no custom nameserver is specified
        let custom_resolver;
        let resolver = if let Some(ns) = self.effective_nameserver(nameserver) {
            custom_resolver = self.create_custom_resolver(ns).await?;
            &custom_resolver
        } else {
            &self.default_resolver
        };
        let domain = prepare_query(domain, record_type)?;

        debug!(nameserver = nameserver.unwrap_or("system"), "Resolving DNS");

        match record_type {
            RecordType::SRV => match parse_srv_query(&domain) {
                // dig-style `_service._proto.name` queries resolve directly.
                Some((service, protocol, name)) => {
                    self.resolve_srv_core(resolver, &service, &protocol, &name)
                        .await
                }
                // A bare domain isn't a valid SRV query — surface a usage hint
                // as an input error (permanent), not a transient DNS failure.
                None => Err(srv_format_error()),
            },
            RecordType::ANY => self.resolve_any(resolver, &domain).await,
            single => self.resolve_type(resolver, &domain, single).await,
        }
    }

    /// Core SRV resolution against an already-built resolver, behind the
    /// `dig`-style `_service._proto.name` path in [`resolve`](Self::resolve).
    /// Validates the service/protocol labels (DNS query-injection guard) then
    /// queries `_service._proto.domain`. Label-validation failures are
    /// [`SeerError::InvalidInput`] — they are caller mistakes, not transient
    /// DNS failures, so they must not be advertised as retryable.
    async fn resolve_srv_core(
        &self,
        resolver: &TokioResolver,
        service: &str,
        protocol: &str,
        domain: &str,
    ) -> Result<Vec<DnsRecord>> {
        if !is_valid_srv_label(service) {
            return Err(SeerError::InvalidInput(format!(
                "invalid SRV service name: {}",
                service
            )));
        }
        if !is_valid_srv_label(protocol) {
            return Err(SeerError::InvalidInput(format!(
                "invalid SRV protocol name: {}",
                protocol
            )));
        }

        let query_name = format!("_{}._{}.{}", service, protocol, domain);

        let Some(response) = dns_lookup_or_empty(
            resolver.lookup(&query_name, HickoryRecordType::SRV).await,
            "SRV",
        )?
        else {
            return Ok(vec![]);
        };

        let records = response
            .answers()
            .iter()
            .filter_map(|record| {
                if let HickoryRData::SRV(srv) = &record.data {
                    Some(DnsRecord {
                        name: query_name.clone(),
                        record_type: RecordType::SRV,
                        ttl: record.ttl,
                        data: RecordData::SRV {
                            priority: srv.priority,
                            weight: srv.weight,
                            port: srv.port,
                            target: srv.target.to_string(),
                        },
                    })
                } else {
                    None
                }
            })
            .collect();

        Ok(records)
    }

    /// Single-type dispatch shared by [`resolve`](Self::resolve) and
    /// [`resolve_any`] — the one place a seer [`RecordType`] is routed to a
    /// lookup, so the two entry points cannot diverge.
    ///
    /// `SRV` and `ANY` are composite queries owned by `resolve` (label
    /// validation / fan-out); requesting them here yields the same
    /// "unsupported record type" error from either entry point.
    async fn resolve_type(
        &self,
        resolver: &TokioResolver,
        domain: &str,
        record_type: RecordType,
    ) -> Result<Vec<DnsRecord>> {
        match record_type {
            // PTR accepts a raw IP literal, which is queried as its
            // reverse-DNS name (and reported under that name).
            RecordType::PTR => {
                let query = if let Ok(ip) = IpAddr::from_str(domain) {
                    reverse_dns_name(&ip)
                } else {
                    domain.to_string()
                };
                self.resolve_records(resolver, &query, RecordType::PTR)
                    .await
            }
            single => self.resolve_records(resolver, domain, single).await,
        }
    }

    /// Generic single-type lookup: queries the wire type for `record_type`
    /// and maps each matching answer through [`convert_rdata`]. Answers of
    /// other types (e.g. a CNAME returned alongside A records) are skipped.
    /// NXDOMAIN/NODATA fold to an empty vec (see [`dns_lookup_or_empty`]).
    ///
    /// MX is the one type with a meaningful intra-response order: answers
    /// are sorted by preference so the highest-priority exchange is first.
    async fn resolve_records(
        &self,
        resolver: &TokioResolver,
        domain: &str,
        record_type: RecordType,
    ) -> Result<Vec<DnsRecord>> {
        let Some(wire_type) = wire_type(record_type) else {
            return Err(unsupported_record_type(record_type));
        };

        let Some(response) = dns_lookup_or_empty(
            resolver.lookup(domain, wire_type).await,
            &record_type.to_string(),
        )?
        else {
            return Ok(vec![]);
        };

        let mut records: Vec<DnsRecord> = response
            .answers()
            .iter()
            .filter_map(|record| {
                convert_rdata(record_type, &record.data).map(|data| DnsRecord {
                    name: domain.to_string(),
                    record_type,
                    ttl: record.ttl,
                    data,
                })
            })
            .collect();

        if record_type == RecordType::MX {
            records.sort_by_key(|r| match &r.data {
                RecordData::MX { preference, .. } => *preference,
                _ => 0,
            });
        }

        Ok(records)
    }

    async fn resolve_any(&self, resolver: &TokioResolver, domain: &str) -> Result<Vec<DnsRecord>> {
        // Query common record types concurrently — previously these ran
        // serially, making `ANY` ~7x slower than a single query (#61).
        // `join_all` preserves input order, so the merged record list keeps the
        // A, AAAA, MX, … ordering.
        let record_types = [
            RecordType::A,
            RecordType::AAAA,
            RecordType::MX,
            RecordType::NS,
            RecordType::TXT,
            RecordType::SOA,
            RecordType::CAA,
        ];

        let results = futures::future::join_all(
            record_types
                .into_iter()
                .map(|record_type| self.resolve_type(resolver, domain, record_type)),
        )
        .await;

        // Track whether any sub-query actually succeeded (an empty answer
        // for an existing domain still counts as success). If every type
        // errored — e.g. the resolver is unreachable — surface that error
        // rather than returning an empty set that reads as "no records".
        let mut all_records = Vec::new();
        let mut any_ok = false;
        let mut last_err = None;
        for result in results {
            match result {
                Ok(records) => {
                    any_ok = true;
                    all_records.extend(records);
                }
                Err(e) => last_err = Some(e),
            }
        }

        match last_err {
            Some(e) if !any_ok => Err(e),
            _ => Ok(all_records),
        }
    }
}

/// Whether a domain appears to exist in the public DNS. Used as a
/// corroborating availability signal when registry data (RDAP/WHOIS) is
/// inconclusive — e.g. a thin/blocked WHOIS body and an RDAP failure that is
/// not an authoritative 404.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum DnsPresence {
    /// The apex returned NS records — the domain is delegated and exists.
    Present,
    /// NXDOMAIN / empty answer — the domain has no DNS presence.
    Absent,
    /// The DNS query itself failed; presence is unknown.
    Unknown,
}

/// Maps an apex NS lookup result to a [`DnsPresence`]. Pure so the mapping is
/// unit-testable without a live resolver. `resolve(.., NS, ..)` already folds
/// NXDOMAIN/NODATA into `Ok(vec![])` (see `dns_lookup_or_empty`), so an empty
/// `Ok` is the "no presence" signal and an `Err` is a genuine query failure.
fn classify_ns_presence(result: &Result<Vec<DnsRecord>>) -> DnsPresence {
    match result {
        Ok(records) if records.is_empty() => DnsPresence::Absent,
        Ok(_) => DnsPresence::Present,
        Err(_) => DnsPresence::Unknown,
    }
}

impl DnsResolver {
    /// Probes whether a domain has any DNS presence by querying its apex NS
    /// records. A registered, delegated domain returns NS records; an
    /// unregistered domain returns NXDOMAIN (an empty record set).
    ///
    /// This is a heuristic, not proof: a registered-but-undelegated domain
    /// also has no NS records, so callers should treat
    /// [`DnsPresence::Absent`] as "likely available" (medium confidence).
    pub async fn presence(&self, domain: &str) -> DnsPresence {
        // A registration-level question: `www.example.com` means
        // `example.com` here (as it does for WHOIS/RDAP), so strip `www.`
        // explicitly — `resolve` itself now keeps it (see `prepare_query`).
        let Ok(apex) = normalize_domain(domain) else {
            return DnsPresence::Unknown;
        };
        classify_ns_presence(&self.resolve(&apex, RecordType::NS, None).await)
    }
}

/// Prepares the query name for a DNS record lookup.
///
/// Record queries are about one exact DNS name, so this normalizes with
/// [`normalize_host`], which — unlike [`normalize_domain`] — keeps a leading
/// `www.`: `www` routinely carries its own records (typically a CNAME), and
/// stripping it silently answered `dig www.example.com CNAME` for the apex.
///
/// PTR queries may be given a raw IP literal. IPv6 literals in particular must
/// NOT pass through the normalizer: its trailing-`:port` strip heuristic
/// truncates the final hextet (e.g. `::1111` → dropped) and the remaining `:`
/// separators then fail character validation, so IPv6 reverse lookups errored
/// out with "Invalid domain name" before ever reaching `resolve_ptr`. For PTR
/// queries we therefore detect an IP literal up front and pass it through in
/// canonical form; everything else (domains, and PTR queries given a
/// reverse-DNS name such as `1.1.1.1.in-addr.arpa`) is normalized as usual.
///
/// Shared (crate-internal) with compare / propagation / follow so every entry
/// point that stores or echoes the queried name agrees with what `resolve`
/// actually queries — they previously re-normalized with `normalize_domain`,
/// losing `www.` and mangling IPv6 PTR literals.
pub(crate) fn prepare_query(domain: &str, record_type: RecordType) -> Result<String> {
    prepare_query_with(domain, record_type, normalize_host)
}

/// [`prepare_query`] with the normalizer injected, so the IP-literal PTR path
/// is testable against a rejecting normalizer (the real one reads the
/// process-global `SEER_DOMAIN_ALLOWLIST`, which tests cannot set).
fn prepare_query_with(
    domain: &str,
    record_type: RecordType,
    normalize: impl Fn(&str) -> Result<String>,
) -> Result<String> {
    if record_type == RecordType::PTR {
        if let Ok(ip) = IpAddr::from_str(domain.trim()) {
            // `SEER_DOMAIN_ALLOWLIST` is enforced inside the normalizer, which
            // an IP literal skips. Run the name that will actually be queried
            // (the reverse-DNS name) through it, so a PTR query for an IP
            // obeys the allowlist exactly like the equivalent
            // `x.x.x.x.in-addr.arpa` query does.
            normalize(&reverse_dns_name(&ip))?;
            return Ok(ip.to_string());
        }
    }
    normalize(domain)
}

/// Parses a `dig`-style SRV query name of the form `_service._proto.name` into
/// its `(service, protocol, name)` parts, with the leading underscores
/// stripped. Returns `None` when the input is not in that shape — e.g. a bare
/// domain with no service/proto labels — so callers can surface a usage hint.
pub(crate) fn parse_srv_query(name: &str) -> Option<(String, String, String)> {
    let mut parts = name.splitn(3, '.');
    let service = parts.next()?.strip_prefix('_')?;
    let protocol = parts.next()?.strip_prefix('_')?;
    let rest = parts.next()?;
    if service.is_empty() || protocol.is_empty() || rest.is_empty() {
        return None;
    }
    Some((service.to_string(), protocol.to_string(), rest.to_string()))
}

/// The canonical "bad SRV query name" error, shared by the single-query resolver
/// path and the propagation checker so both reject a bare-domain SRV query with
/// the identical permanent `InvalidInput` message.
pub(crate) fn srv_format_error() -> SeerError {
    SeerError::InvalidInput(
        "SRV records require service name format: _service._proto.name".to_string(),
    )
}

fn reverse_dns_name(ip: &IpAddr) -> String {
    match ip {
        IpAddr::V4(addr) => {
            let octets = addr.octets();
            format!(
                "{}.{}.{}.{}.in-addr.arpa",
                octets[3], octets[2], octets[1], octets[0]
            )
        }
        IpAddr::V6(addr) => {
            let segments = addr.segments();
            // 32 hex nibbles + 31 dots + ".ip6.arpa" (9) = 72 chars
            let mut result = String::with_capacity(72);
            let mut first = true;
            for segment in segments.iter().rev() {
                for shift in [0, 4, 8, 12] {
                    if !first {
                        result.push('.');
                    }
                    first = false;
                    let nibble = (segment >> shift) & 0xF;
                    result
                        .push(char::from_digit(nibble as u32, 16).expect("nibble is always 0-15"));
                }
            }
            result.push_str(".ip6.arpa");
            result
        }
    }
}

fn parse_caa(caa: &CAA) -> (u8, String, String) {
    // hickory 0.26: CAA fields are public. `flags()` reassembles the full
    // wire flags byte — the issuer-critical bit plus the reserved bits hickory
    // keeps in `reserved_flags` — so the reported value matches what the zone
    // publishes (rebuilding it from `issuer_critical` alone dropped the
    // reserved bits). `value` is a `Vec<u8>` because RFC 8659 permits binary
    // values for unknown property types. For seer's reporting purposes the
    // common tags (issue/issuewild/iodef) are always UTF-8, so a lossy
    // conversion preserves prior behavior without panicking on the rare
    // binary case.
    let flags = caa.flags();
    let tag = caa.tag.clone();
    let value = String::from_utf8_lossy(&caa.value).to_string();
    (flags, tag, value)
}

/// Maps a concrete seer [`RecordType`] to the hickory wire type it queries.
///
/// `SRV` and `ANY` are composite lookups with dedicated paths
/// (`resolve_srv_core` / `resolve_any`) and deliberately have no mapping
/// here — asking [`DnsResolver::resolve_type`] for them is an error.
fn wire_type(record_type: RecordType) -> Option<HickoryRecordType> {
    Some(match record_type {
        RecordType::A => HickoryRecordType::A,
        RecordType::AAAA => HickoryRecordType::AAAA,
        RecordType::CNAME => HickoryRecordType::CNAME,
        RecordType::MX => HickoryRecordType::MX,
        RecordType::NS => HickoryRecordType::NS,
        RecordType::TXT => HickoryRecordType::TXT,
        RecordType::SOA => HickoryRecordType::SOA,
        RecordType::PTR => HickoryRecordType::PTR,
        RecordType::CAA => HickoryRecordType::CAA,
        RecordType::DNSKEY => HickoryRecordType::DNSKEY,
        RecordType::DS => HickoryRecordType::DS,
        // TLSA queries are how DANE clients discover the certificate
        // association data for a TLS endpoint. The convention is
        // `_<port>._<proto>.<host>` (e.g. `_443._tcp.example.com`); seer
        // does not enforce the label shape because TLSA is also used for
        // other transports.
        RecordType::TLSA => HickoryRecordType::TLSA,
        RecordType::SSHFP => HickoryRecordType::SSHFP,
        RecordType::NAPTR => HickoryRecordType::NAPTR,
        RecordType::SRV | RecordType::ANY => return None,
    })
}

/// The canonical error for record types that cannot be resolved as a single
/// wire query, shared by every dispatch path so the message never diverges.
fn unsupported_record_type(record_type: RecordType) -> SeerError {
    SeerError::DnsError(format!("unsupported record type: {}", record_type))
}

/// Uppercase hex rendering for wire-format byte fields (DS digests, TLSA
/// certificate data, SSHFP fingerprints), matching dig's presentation.
fn hex_upper(bytes: &[u8]) -> String {
    bytes.iter().map(|b| format!("{:02X}", b)).collect()
}

/// Converts one hickory answer's RData into our [`RecordData`], if it is the
/// variant `record_type` asked for. Any other RData in the answer section
/// (e.g. a CNAME returned alongside A records) yields `None` and is skipped.
///
/// This is the single RData→RecordData conversion table used by every
/// resolution path.
fn convert_rdata(record_type: RecordType, data: &HickoryRData) -> Option<RecordData> {
    use hickory_resolver::proto::dnssec::rdata::DNSSECRData;

    match (record_type, data) {
        (RecordType::A, HickoryRData::A(addr)) => Some(RecordData::A {
            address: addr.0.to_string(),
        }),
        (RecordType::AAAA, HickoryRData::AAAA(addr)) => Some(RecordData::AAAA {
            address: addr.0.to_string(),
        }),
        (RecordType::CNAME, HickoryRData::CNAME(cname)) => Some(RecordData::CNAME {
            target: cname.0.to_string(),
        }),
        (RecordType::MX, HickoryRData::MX(mx)) => Some(RecordData::MX {
            preference: mx.preference,
            exchange: mx.exchange.to_string(),
        }),
        (RecordType::NS, HickoryRData::NS(ns)) => Some(RecordData::NS {
            nameserver: ns.0.to_string(),
        }),
        (RecordType::TXT, HickoryRData::TXT(txt)) => Some(RecordData::TXT {
            text: txt
                .txt_data
                .iter()
                .map(|data| String::from_utf8_lossy(data).to_string())
                .collect::<Vec<_>>()
                .join(""),
        }),
        (RecordType::SOA, HickoryRData::SOA(soa)) => Some(RecordData::SOA {
            mname: soa.mname.to_string(),
            rname: soa.rname.to_string(),
            serial: soa.serial,
            // hickory models refresh/retry/expire as i32, but they are
            // unsigned 32-bit wire intervals. A value >= 2^31 arrives as a
            // negative i32; `try_into()` would fail and zero it out, hiding
            // the real (large) value. `as u32` reinterprets the bits to the
            // correct unsigned value instead.
            refresh: soa.refresh as u32,
            retry: soa.retry as u32,
            expire: soa.expire as u32,
            minimum: soa.minimum,
        }),
        (RecordType::PTR, HickoryRData::PTR(ptr)) => Some(RecordData::PTR {
            target: ptr.0.to_string(),
        }),
        (RecordType::CAA, HickoryRData::CAA(caa)) => {
            let (flags, tag, value) = parse_caa(caa);
            Some(RecordData::CAA { flags, tag, value })
        }
        (RecordType::DNSKEY, HickoryRData::DNSSEC(DNSSECRData::DNSKEY(dnskey))) => {
            use base64::{engine::general_purpose::STANDARD, Engine};
            let public_key_buf = dnskey.public_key();
            Some(RecordData::DNSKEY {
                flags: dnskey.flags(),
                // Protocol is always 3 for DNSSEC (RFC 4034)
                protocol: 3,
                algorithm: u8::from(public_key_buf.algorithm()),
                public_key: STANDARD.encode(public_key_buf.public_bytes()),
            })
        }
        (RecordType::DS, HickoryRData::DNSSEC(DNSSECRData::DS(ds))) => Some(RecordData::DS {
            key_tag: ds.key_tag(),
            algorithm: u8::from(ds.algorithm()),
            digest_type: u8::from(ds.digest_type()),
            digest: hex_upper(ds.digest()),
        }),
        (RecordType::TLSA, HickoryRData::TLSA(tlsa)) => Some(RecordData::TLSA {
            cert_usage: u8::from(tlsa.cert_usage),
            selector: u8::from(tlsa.selector),
            matching: u8::from(tlsa.matching),
            cert_data: hex_upper(&tlsa.cert_data),
        }),
        (RecordType::SSHFP, HickoryRData::SSHFP(sshfp)) => Some(RecordData::SSHFP {
            algorithm: u8::from(sshfp.algorithm),
            fingerprint_type: u8::from(sshfp.fingerprint_type),
            fingerprint: hex_upper(&sshfp.fingerprint),
        }),
        // flags/services/regexp are DNS <character-string>s (raw bytes);
        // they are conventionally ASCII, so a lossy decode is a faithful,
        // panic-free rendering.
        (RecordType::NAPTR, HickoryRData::NAPTR(naptr)) => Some(RecordData::NAPTR {
            order: naptr.order,
            preference: naptr.preference,
            flags: String::from_utf8_lossy(&naptr.flags).into_owned(),
            services: String::from_utf8_lossy(&naptr.services).into_owned(),
            regexp: String::from_utf8_lossy(&naptr.regexp).into_owned(),
            replacement: naptr.replacement.to_string(),
        }),
        _ => None,
    }
}

/// Validates SRV service/protocol labels (alphanumeric and hyphens only, no dots)
fn is_valid_srv_label(label: &str) -> bool {
    !label.is_empty()
        && label.len() <= 63
        && label.chars().all(|c| c.is_ascii_alphanumeric() || c == '-')
        && !label.starts_with('-')
        && !label.ends_with('-')
}

#[cfg(test)]
mod tests {
    //! Unit tests for the pure helpers and public surface of the DNS
    //! resolver, plus hermetic mock-server tests (see the `mock_*` tests
    //! below) that exercise the full `resolve()` path against the shared
    //! loopback UDP fixture in [`crate::dns::test_support`]. Live-network
    //! variants remain `#[ignore]`d here and in the sibling modules
    //! (`dns/dnssec.rs`, `dns/follow.rs`).

    use super::*;

    /// Regression: an intermittent 5-second stall on every default-resolver
    /// lookup, and an outright `seer doctor` FAIL, on hosts that advertise an
    /// IPv6 default route but have no working IPv6 transit (RA-advertised
    /// IPv6 with no real transit is common on consumer networks).
    ///
    /// `GOOGLE` carries two IPv4 and two IPv6 addresses. hickory queries
    /// `num_concurrent_reqs` (default 2) servers in parallel, and under the
    /// default `QueryStatistics` ordering a short-lived CLI process has no
    /// statistics to order by — so roughly one run in six drew both IPv6
    /// servers, black-holed, and burned the full per-query timeout.
    ///
    /// `UserProvidedOrder` makes the first two picks deterministically the
    /// IPv4 servers. IPv6 stays in the list for IPv6-only hosts, where the
    /// IPv4 sends fail immediately with ENETUNREACH rather than timing out.
    #[test]
    fn standard_opts_pin_server_order_so_ipv4_is_tried_first() {
        let mut opts = ResolverOpts::default();
        apply_standard_opts(&mut opts, Duration::from_secs(5));
        assert_eq!(
            opts.server_ordering_strategy,
            ServerOrderingStrategy::UserProvidedOrder,
            "QueryStatistics ordering is nondeterministic in a short-lived \
             process and can draw only black-holed IPv6 servers"
        );
    }

    /// The ordering fix is only meaningful if the configured list actually
    /// starts with IPv4 servers, and only sufficient if at least
    /// `num_concurrent_reqs` of them are IPv4 — otherwise a parallel pair
    /// still includes a black-holeable IPv6 server.
    #[test]
    fn default_config_lists_enough_ipv4_servers_before_any_ipv6() {
        let config = ResolverConfig::udp_and_tcp(&GOOGLE);
        let ips: Vec<_> = config.name_servers().iter().map(|ns| ns.ip).collect();
        let concurrent = ResolverOpts::default().num_concurrent_reqs.max(1);
        assert!(
            ips.len() > concurrent,
            "expected more servers than the concurrency window: {ips:?}"
        );
        for (i, ip) in ips.iter().take(concurrent).enumerate() {
            assert!(
                ip.is_ipv4(),
                "server {i} in the concurrency window is not IPv4: {ips:?}"
            );
        }
    }

    #[test]
    fn from_config_applies_dns_timeout() {
        let mut config = crate::config::SeerConfig::default();
        config.timeouts.dns_secs = 9;
        let resolver = DnsResolver::from_config(&config);
        assert_eq!(resolver.timeout, Duration::from_secs(9));
    }
    use std::net::{Ipv4Addr, Ipv6Addr};

    // --- RecordType::from_str edge cases -----------------------------

    #[test]
    fn record_type_from_str_accepts_lowercase() {
        assert_eq!(RecordType::from_str("a").unwrap(), RecordType::A);
        assert_eq!(RecordType::from_str("mx").unwrap(), RecordType::MX);
        assert_eq!(RecordType::from_str("cname").unwrap(), RecordType::CNAME);
        assert_eq!(RecordType::from_str("dnskey").unwrap(), RecordType::DNSKEY);
    }

    #[test]
    fn record_type_from_str_accepts_mixed_case() {
        assert_eq!(RecordType::from_str("Mx").unwrap(), RecordType::MX);
        assert_eq!(RecordType::from_str("cNaMe").unwrap(), RecordType::CNAME);
    }

    #[test]
    fn record_type_from_str_rejects_whitespace_padded() {
        // No trim is done inside from_str; leading/trailing whitespace
        // must currently cause a parse error so callers don't pass
        // malformed labels through.
        assert!(RecordType::from_str(" A").is_err());
        assert!(RecordType::from_str("A ").is_err());
        assert!(RecordType::from_str("\tA\n").is_err());
    }

    #[test]
    fn record_type_from_str_rejects_unknown() {
        assert!(RecordType::from_str("NOTAREAL").is_err());
        assert!(RecordType::from_str("A1").is_err());
        assert!(RecordType::from_str("").is_err());
    }

    #[test]
    fn record_type_from_str_accepts_star_as_any() {
        assert_eq!(RecordType::from_str("*").unwrap(), RecordType::ANY);
        assert_eq!(RecordType::from_str("ANY").unwrap(), RecordType::ANY);
        assert_eq!(RecordType::from_str("any").unwrap(), RecordType::ANY);
    }

    // --- is_valid_srv_label ------------------------------------------

    #[test]
    fn srv_label_accepts_alphanumeric_and_hyphen() {
        assert!(is_valid_srv_label("http"));
        assert!(is_valid_srv_label("ldap-tls"));
        assert!(is_valid_srv_label("a1"));
        assert!(is_valid_srv_label("tcp"));
    }

    #[test]
    fn srv_label_rejects_empty() {
        assert!(!is_valid_srv_label(""));
    }

    #[test]
    fn srv_label_rejects_leading_or_trailing_hyphen() {
        assert!(!is_valid_srv_label("-http"));
        assert!(!is_valid_srv_label("http-"));
        assert!(!is_valid_srv_label("-"));
    }

    #[test]
    fn srv_label_rejects_dots() {
        // Dots would let an attacker construct `_service._tcp.evil.com.target`
        // and pivot the query to a different domain.
        assert!(!is_valid_srv_label("http.evil"));
        assert!(!is_valid_srv_label("a.b"));
    }

    #[test]
    fn srv_label_rejects_special_chars() {
        assert!(!is_valid_srv_label("http evil"));
        assert!(!is_valid_srv_label("http/evil"));
        assert!(!is_valid_srv_label("http\0"));
        assert!(!is_valid_srv_label("http\n"));
    }

    #[test]
    fn srv_label_rejects_over_63_chars() {
        let too_long = "a".repeat(64);
        assert!(!is_valid_srv_label(&too_long));
        let exactly_63 = "a".repeat(63);
        assert!(is_valid_srv_label(&exactly_63));
    }

    // --- classify_ns_presence ----------------------------------------

    #[test]
    fn classify_ns_presence_absent_on_empty_ok() {
        // resolve(.., NS) folds NXDOMAIN/NODATA into Ok(vec![]).
        let r: Result<Vec<DnsRecord>> = Ok(vec![]);
        assert_eq!(classify_ns_presence(&r), DnsPresence::Absent);
    }

    #[test]
    fn classify_ns_presence_present_on_records() {
        let rec = DnsRecord {
            name: "example.test.".to_string(),
            record_type: RecordType::NS,
            ttl: 3600,
            data: RecordData::NS {
                nameserver: "ns1.example.net.".to_string(),
            },
        };
        let r: Result<Vec<DnsRecord>> = Ok(vec![rec]);
        assert_eq!(classify_ns_presence(&r), DnsPresence::Present);
    }

    #[test]
    fn classify_ns_presence_unknown_on_error() {
        let r: Result<Vec<DnsRecord>> = Err(SeerError::DnsError("servfail".to_string()));
        assert_eq!(classify_ns_presence(&r), DnsPresence::Unknown);
    }

    // --- reverse_dns_name --------------------------------------------

    #[test]
    fn reverse_dns_name_formats_ipv4_correctly() {
        let ip: IpAddr = Ipv4Addr::new(192, 0, 2, 1).into();
        assert_eq!(reverse_dns_name(&ip), "1.2.0.192.in-addr.arpa");
    }

    #[test]
    fn reverse_dns_name_formats_ipv6_correctly() {
        // ::1 (loopback) → 32 nibbles of 0 followed by ...0.0.0.1 reversed.
        let ip: IpAddr = Ipv6Addr::LOCALHOST.into();
        let name = reverse_dns_name(&ip);
        assert!(
            name.ends_with(".ip6.arpa"),
            "must end with .ip6.arpa; got: {}",
            name
        );
        // The first nibble (most-reversed position) must be 1 (from ::1 low bit).
        assert!(
            name.starts_with("1."),
            "expected '1.' prefix, got: {}",
            name
        );
        // 32 nibbles + 31 dots + ".ip6.arpa" (9 chars) = 72.
        assert_eq!(name.len(), 72);
    }

    // --- DnsResolver construction ------------------------------------

    #[test]
    fn resolver_new_has_default_timeout() {
        let r = DnsResolver::new();
        assert_eq!(r.timeout, DEFAULT_TIMEOUT);
    }

    #[test]
    fn resolver_with_timeout_overrides_default() {
        let custom = Duration::from_secs(42);
        let r = DnsResolver::new().with_timeout(custom);
        assert_eq!(r.timeout, custom);
    }

    #[test]
    fn resolver_default_matches_new() {
        let a = DnsResolver::default();
        let b = DnsResolver::new();
        assert_eq!(a.timeout, b.timeout);
    }

    // --- create_custom_resolver validation ---------------------------

    #[tokio::test]
    async fn custom_resolver_rejects_invalid_input() {
        // After hostname support was added, a string that is neither a
        // valid IP nor a resolvable hostname should fail with a clear
        // "failed to resolve" error rather than panicking or hanging.
        // We pick a name that is *syntactically* impossible to resolve.
        let r = DnsResolver::new();
        let err = r.create_custom_resolver("..").await.unwrap_err();
        let msg = err.to_string().to_lowercase();
        assert!(
            msg.contains("dns resolution failed") || msg.contains("invalid"),
            "expected resolution failure, got: {}",
            msg
        );
    }

    #[tokio::test]
    async fn custom_resolver_rejects_private_ipv4() {
        // SSRF defense: private / reserved ranges must be blocked even
        // when passed as a literal IP rather than a hostname.
        let r = DnsResolver::new();
        for reserved in ["127.0.0.1", "10.0.0.1", "192.168.1.1", "169.254.169.254"] {
            let err = r.create_custom_resolver(reserved).await.unwrap_err();
            let msg = err.to_string().to_lowercase();
            assert!(
                msg.contains("blocked") || msg.contains("reserved"),
                "reserved IP {} must be rejected, got error: {}",
                reserved,
                msg
            );
        }
    }

    #[tokio::test]
    async fn custom_resolver_rejects_loopback_ipv6() {
        let r = DnsResolver::new();
        let err = r.create_custom_resolver("::1").await.unwrap_err();
        let msg = err.to_string().to_lowercase();
        assert!(
            msg.contains("blocked") || msg.contains("reserved"),
            "::1 must be rejected, got error: {}",
            msg
        );
    }

    #[tokio::test]
    async fn custom_resolver_accepts_public_ipv4() {
        // A known public resolver IP must be acceptable.
        let r = DnsResolver::new();
        let result = r.create_custom_resolver("8.8.8.8").await;
        assert!(
            result.is_ok(),
            "8.8.8.8 must be accepted as a public nameserver, got: {:?}",
            result.err()
        );
    }

    // --- DoT/DoH: SSRF refusal parity ---------------------------------
    //
    // The reserved-IP guard must apply identically to tls:// and https://
    // specs — an encrypted transport is not a bypass of the SSRF policy.

    #[tokio::test]
    async fn custom_resolver_rejects_private_ip_for_dot_and_doh() {
        let r = DnsResolver::new();
        for reserved in [
            "tls://127.0.0.1",
            "tls://192.168.1.1:853",
            "tls://[::1]",
            "https://10.0.0.1/dns-query",
            "https://169.254.169.254",
            "tls://[fd00::1]:853",
        ] {
            let err = r.create_custom_resolver(reserved).await.unwrap_err();
            let msg = err.to_string().to_lowercase();
            assert!(
                msg.contains("blocked") || msg.contains("reserved"),
                "reserved spec {} must be rejected, got error: {}",
                reserved,
                msg
            );
        }
        // DoH to an IPv6 literal is refused even earlier, at parse time
        // (it can never work — see `NameserverSpec::parse`).
        let err = r
            .create_custom_resolver("https://[fd00::1]:443/dns-query")
            .await
            .unwrap_err();
        assert!(matches!(err, SeerError::InvalidInput(_)), "{err:?}");
    }

    #[tokio::test]
    async fn custom_resolver_accepts_public_dot_and_doh_literals() {
        // Construction (parse → validate → config build) must succeed for
        // public DoT/DoH IP literals without any network traffic.
        let r = DnsResolver::new();
        for spec in ["tls://1.1.1.1", "https://8.8.8.8/dns-query"] {
            let result = r.create_custom_resolver(spec).await;
            assert!(
                result.is_ok(),
                "{} must be accepted, got: {:?}",
                spec,
                result.err()
            );
        }
    }

    #[tokio::test]
    async fn custom_resolver_rejects_unknown_scheme() {
        let r = DnsResolver::new();
        let err = r.create_custom_resolver("ftp://8.8.8.8").await.unwrap_err();
        assert!(
            matches!(err, SeerError::InvalidInput(_)),
            "unknown scheme must be an input error, got: {err:?}"
        );
    }

    // --- build_upstream_config: protocol/port/tls-name construction ----

    fn spec(s: &str) -> NameserverSpec {
        NameserverSpec::parse(s).unwrap_or_else(|e| panic!("{s:?} must parse: {e}"))
    }

    #[test]
    fn upstream_config_udp_defaults() {
        use hickory_resolver::config::ProtocolConfig;

        let ip: IpAddr = "8.8.8.8".parse().unwrap();
        let config = build_upstream_config(&spec("8.8.8.8"), &[ip], None);
        let servers = config.name_servers();
        assert_eq!(servers.len(), 1);
        assert_eq!(servers[0].ip, ip);
        assert_eq!(servers[0].connections.len(), 1);
        assert_eq!(servers[0].connections[0].port, 53);
        assert!(matches!(
            servers[0].connections[0].protocol,
            ProtocolConfig::Udp
        ));
    }

    #[test]
    fn upstream_config_udp_explicit_port() {
        let ip: IpAddr = "9.9.9.9".parse().unwrap();
        let config = build_upstream_config(&spec("9.9.9.9:5353"), &[ip], None);
        assert_eq!(config.name_servers()[0].connections[0].port, 5353);
    }

    #[test]
    fn upstream_config_tls_sets_protocol_port_and_server_name() {
        use hickory_resolver::config::ProtocolConfig;

        let ip: IpAddr = "9.9.9.9".parse().unwrap();
        let config = build_upstream_config(&spec("tls://dns.quad9.net"), &[ip], None);
        let ns = &config.name_servers()[0];
        assert_eq!(ns.ip, ip);
        assert_eq!(ns.connections.len(), 1);
        assert_eq!(ns.connections[0].port, 853);
        match &ns.connections[0].protocol {
            ProtocolConfig::Tls { server_name } => {
                assert_eq!(&**server_name, "dns.quad9.net");
            }
            other => panic!("expected Tls protocol, got {other:?}"),
        }
    }

    #[test]
    fn upstream_config_tls_ip_literal_uses_ip_as_server_name() {
        use hickory_resolver::config::ProtocolConfig;

        let ip: IpAddr = "1.1.1.1".parse().unwrap();
        let config = build_upstream_config(&spec("tls://1.1.1.1"), &[ip], None);
        match &config.name_servers()[0].connections[0].protocol {
            ProtocolConfig::Tls { server_name } => assert_eq!(&**server_name, "1.1.1.1"),
            other => panic!("expected Tls protocol, got {other:?}"),
        }
    }

    #[test]
    fn upstream_config_https_sets_protocol_port_path_and_server_name() {
        use hickory_resolver::config::ProtocolConfig;

        let ip: IpAddr = "104.16.248.249".parse().unwrap();
        let config = build_upstream_config(&spec("https://cloudflare-dns.com"), &[ip], None);
        let ns = &config.name_servers()[0];
        assert_eq!(ns.connections[0].port, 443);
        match &ns.connections[0].protocol {
            ProtocolConfig::Https { server_name, path } => {
                assert_eq!(&**server_name, "cloudflare-dns.com");
                assert_eq!(&**path, "/dns-query");
            }
            other => panic!("expected Https protocol, got {other:?}"),
        }
    }

    #[test]
    fn upstream_config_https_custom_port_and_path() {
        use hickory_resolver::config::ProtocolConfig;

        let ip: IpAddr = "8.8.8.8".parse().unwrap();
        let config = build_upstream_config(&spec("https://dns.google:8443/resolve"), &[ip], None);
        let ns = &config.name_servers()[0];
        assert_eq!(ns.connections[0].port, 8443);
        match &ns.connections[0].protocol {
            ProtocolConfig::Https { server_name, path } => {
                assert_eq!(&**server_name, "dns.google");
                assert_eq!(&**path, "/resolve");
            }
            other => panic!("expected Https protocol, got {other:?}"),
        }
    }

    #[test]
    fn upstream_config_multiple_ips_share_spec() {
        // A hostname spec resolving to several addresses gets one upstream
        // per IP, all speaking the same protocol/port/TLS name.
        use hickory_resolver::config::ProtocolConfig;

        let ips: Vec<IpAddr> = vec![
            "9.9.9.9".parse().unwrap(),
            "149.112.112.112".parse().unwrap(),
        ];
        let config = build_upstream_config(&spec("tls://dns.quad9.net"), &ips, None);
        let servers = config.name_servers();
        assert_eq!(servers.len(), 2);
        for (ns, expected_ip) in servers.iter().zip(&ips) {
            assert_eq!(&ns.ip, expected_ip);
            assert_eq!(ns.connections[0].port, 853);
            assert!(matches!(
                &ns.connections[0].protocol,
                ProtocolConfig::Tls { server_name } if &**server_name == "dns.quad9.net"
            ));
        }
    }

    /// Regression: every dual-stack hostname nameserver (`dns.google`,
    /// `tls://one.one.one.one`, `https://cloudflare-dns.com/dns-query`) timed
    /// out on hosts with an IPv6 default route but no IPv6 transit, while IP
    /// literals worked. The bootstrap `lookup_ip` returns AAAA before A, the
    /// upstream list kept that order, and the pool's first parallel pair was
    /// both IPv6 — which spent the whole per-query deadline before any IPv4
    /// entry was tried.
    #[test]
    fn upstream_config_orders_ipv4_before_ipv6() {
        // As hickory's `lookup_ip` returns them: AAAA records first.
        let ips: Vec<IpAddr> = [
            "2606:4700::6810:f8f9",
            "2606:4700::6810:f9f9",
            "104.16.248.249",
            "104.16.249.249",
        ]
        .iter()
        .map(|s| s.parse().unwrap())
        .collect();
        let config =
            build_upstream_config(&spec("https://cloudflare-dns.com/dns-query"), &ips, None);
        let order: Vec<IpAddr> = config.name_servers().iter().map(|ns| ns.ip).collect();
        assert_eq!(
            order,
            [ips[2], ips[3], ips[0], ips[1]],
            "IPv4 first, each family in resolved order, nothing dropped"
        );
        let concurrent = ResolverOpts::default().num_concurrent_reqs.max(1);
        assert!(
            order.iter().take(concurrent).all(IpAddr::is_ipv4),
            "the parallel window must be all IPv4: {order:?}"
        );
    }

    #[test]
    fn upstream_config_test_port_override_wins() {
        // The #[cfg(test)] mock-server seam must override the spec's port.
        let ip: IpAddr = "127.0.0.1".parse().unwrap();
        let config = build_upstream_config(&spec("127.0.0.1"), &[ip], Some(9999));
        assert_eq!(config.name_servers()[0].connections[0].port, 9999);
    }

    // --- Live DoT/DoH queries (opt-in only) ----------------------------

    #[tokio::test]
    #[ignore = "live network — DoT query against Cloudflare"]
    async fn live_resolve_over_dot() {
        let r = DnsResolver::new();
        let records = r
            .resolve("example.com", RecordType::A, Some("tls://1.1.1.1"))
            .await
            .expect("DoT lookup should succeed");
        assert!(!records.is_empty(), "expected A records over DoT");
    }

    #[tokio::test]
    #[ignore = "live network — DoH query against Cloudflare"]
    async fn live_resolve_over_doh() {
        let r = DnsResolver::new();
        let records = r
            .resolve(
                "example.com",
                RecordType::A,
                Some("https://cloudflare-dns.com/dns-query"),
            )
            .await
            .expect("DoH lookup should succeed");
        assert!(!records.is_empty(), "expected A records over DoH");
    }

    // --- SRV query validation (integration between helper + resolver) ----

    #[tokio::test]
    async fn resolve_srv_rejects_invalid_service_label() {
        let r = DnsResolver::new();
        // With_dot service name would construct a malformed DNS query.
        let result = r
            .resolve_srv_core(&r.default_resolver, "http.evil", "tcp", "example.com")
            .await;
        assert!(result.is_err());
        let msg = result.unwrap_err().to_string().to_lowercase();
        assert!(
            msg.contains("invalid srv service"),
            "expected SRV service validation error, got: {}",
            msg
        );
    }

    #[tokio::test]
    async fn resolve_srv_rejects_invalid_protocol_label() {
        let r = DnsResolver::new();
        let result = r
            .resolve_srv_core(&r.default_resolver, "http", "tcp.evil", "example.com")
            .await;
        assert!(result.is_err());
        let msg = result.unwrap_err().to_string().to_lowercase();
        assert!(
            msg.contains("invalid srv protocol"),
            "expected SRV protocol validation error, got: {}",
            msg
        );
    }

    #[tokio::test]
    async fn resolve_srv_normalizes_and_validates_domain_input() {
        // SRV names must be normalized/validated like every other query, or
        // garbage input reaches query construction as a (misclassified) DNS
        // failure instead of an input error (2026-07-11 review).
        let r = DnsResolver::new();
        let result = r
            .resolve("_http._tcp.not a valid domain", RecordType::SRV, None)
            .await;
        assert!(
            matches!(result, Err(SeerError::InvalidDomain(_))),
            "expected InvalidDomain from domain validation, got: {result:?}"
        );
    }

    // --- Normalization applied before resolution ---------------------

    #[tokio::test]
    async fn resolve_normalizes_uppercase_domain_input() {
        // We can't hit the network in unit tests, but we can at least
        // assert that normalization rejects clearly-invalid input
        // before any network call is made. Domains with a leading `.`
        // are rejected by the normalizer.
        let r = DnsResolver::new();
        let result = r.resolve(".bad.example", RecordType::A, None).await;
        assert!(result.is_err(), "leading-dot domain must be rejected");
    }

    // --- SRV record -------------------------------------------------

    // --- SRV via dig-style names (parse_srv_query) -------------------

    #[test]
    fn parse_srv_query_extracts_service_proto_and_name() {
        assert_eq!(
            parse_srv_query("_sip._tcp.example.com"),
            Some((
                "sip".to_string(),
                "tcp".to_string(),
                "example.com".to_string()
            ))
        );
    }

    #[test]
    fn parse_srv_query_keeps_multilabel_domain() {
        assert_eq!(
            parse_srv_query("_sip._tcp.sip.voice.google.com"),
            Some((
                "sip".to_string(),
                "tcp".to_string(),
                "sip.voice.google.com".to_string()
            ))
        );
    }

    #[test]
    fn fqdn_appends_root_dot_once() {
        assert_eq!(fqdn("example.com"), "example.com.");
        assert_eq!(fqdn("example.com."), "example.com.");
    }

    #[test]
    fn parse_srv_query_rejects_bare_domain() {
        assert_eq!(parse_srv_query("example.com"), None);
    }

    #[test]
    fn parse_srv_query_rejects_missing_proto_label() {
        // Second label must be an `_proto` label.
        assert_eq!(parse_srv_query("_sip.example.com"), None);
    }

    #[tokio::test]
    async fn resolve_rejects_bare_domain_for_srv_as_input_error() {
        // A bare domain (no _service._proto labels) cannot be an SRV query.
        // This is a usage/input error — NOT a transient DNS failure — so it
        // must surface as InvalidInput (which maps to a permanent, non-retryable
        // signal across the Python/MCP boundary), and still carry the hint.
        let r = DnsResolver::new();
        let err = r
            .resolve("example.com", RecordType::SRV, None)
            .await
            .expect_err("bare-domain SRV must error");
        assert!(
            matches!(err, SeerError::InvalidInput(_)),
            "bare-domain SRV should be an input error, got: {err:?}"
        );
        assert!(err.to_string().contains("_service._proto"));
    }

    #[tokio::test]
    #[ignore = "live network"]
    async fn resolve_srv_via_dig_style_name_returns_records() {
        // _caldavs._tcp.google.com is a long-standing public SRV record
        // (CalDAV discovery → calendar.google.com:443).
        let r = DnsResolver::new();
        let records = r
            .resolve("_caldavs._tcp.google.com", RecordType::SRV, None)
            .await
            .expect("dig-style SRV lookup should succeed");
        assert!(!records.is_empty(), "expected SRV records");
        assert!(records.iter().all(|r| r.record_type == RecordType::SRV));
    }

    #[tokio::test]
    #[ignore = "live network"]
    async fn resolve_naptr_returns_records() {
        // sip2sip.info publishes stable NAPTR records for SIP discovery.
        let r = DnsResolver::new();
        let records = r
            .resolve("sip2sip.info", RecordType::NAPTR, None)
            .await
            .expect("NAPTR lookup should succeed");
        assert!(!records.is_empty(), "expected NAPTR records");
        assert!(records.iter().all(|r| r.record_type == RecordType::NAPTR));
    }

    // --- prepare_query: PTR must accept raw IP literals (incl. IPv6) --

    #[test]
    fn prepare_query_passes_ipv6_literal_through_for_ptr() {
        // Regression: normalize_domain's port-strip heuristic mangled IPv6
        // literals (the trailing `:1111` group looks like a `:port`), so IPv6
        // reverse lookups failed with "Invalid domain name" before ever
        // reaching resolve_ptr. PTR queries for IP literals must bypass domain
        // normalization.
        let out = prepare_query("2606:4700:4700::1111", RecordType::PTR).unwrap();
        assert_eq!(out, "2606:4700:4700::1111");
    }

    #[test]
    fn prepare_query_passes_ipv6_loopback_through_for_ptr() {
        let out = prepare_query("::1", RecordType::PTR).unwrap();
        assert_eq!(out, "::1");
    }

    #[test]
    fn prepare_query_passes_ipv4_literal_through_for_ptr() {
        let out = prepare_query("8.8.8.8", RecordType::PTR).unwrap();
        assert_eq!(out, "8.8.8.8");
    }

    #[test]
    fn prepare_query_normalizes_non_ip_ptr_names() {
        // A reverse-DNS name (not an IP literal) still gets normalized.
        let out = prepare_query("1.1.1.1.in-addr.arpa", RecordType::PTR).unwrap();
        assert_eq!(out, "1.1.1.1.in-addr.arpa");
    }

    #[test]
    fn prepare_query_keeps_www_for_record_queries() {
        // Regression: record queries normalized with `normalize_domain`,
        // which strips `www.` — so `dig www.example.com CNAME` silently
        // queried the apex. A record query is about the exact name.
        let out = prepare_query("HTTPS://WWW.Example.com/path", RecordType::A).unwrap();
        assert_eq!(out, "www.example.com");
        let out = prepare_query("www.example.com", RecordType::CNAME).unwrap();
        assert_eq!(out, "www.example.com");
    }

    #[test]
    fn prepare_query_still_normalizes_scheme_port_path_and_case() {
        let out = prepare_query("https://API.Example.COM:8443/v1?q=1#frag", RecordType::A).unwrap();
        assert_eq!(out, "api.example.com");
        let out = prepare_query("example.com.", RecordType::MX).unwrap();
        assert_eq!(out, "example.com");
        assert!(prepare_query("not a domain", RecordType::A).is_err());
    }

    #[test]
    fn prepare_query_runs_ptr_ip_literal_through_the_normalizer() {
        // Regression: an IP literal skipped the normalizer entirely, and with
        // it the `SEER_DOMAIN_ALLOWLIST` check that lives inside — so a PTR
        // query for an IP bypassed the allowlist that the equivalent
        // `in-addr.arpa` query obeys. Simulate an allowlist that excludes
        // the reverse zones with a rejecting normalizer.
        let deny_arpa = |name: &str| -> Result<String> {
            if name.ends_with(".arpa") {
                Err(SeerError::DomainNotAllowed {
                    domain: name.to_string(),
                    tld: "arpa".to_string(),
                })
            } else {
                Ok(name.to_string())
            }
        };
        for ip in ["192.0.2.1", "2606:4700:4700::1111"] {
            let err = prepare_query_with(ip, RecordType::PTR, deny_arpa)
                .expect_err("PTR for an IP literal must obey the normalizer");
            assert!(matches!(err, SeerError::DomainNotAllowed { .. }), "{err:?}");
        }
        // With the real normalizer (no allowlist in tests) both still pass.
        assert_eq!(
            prepare_query_with("192.0.2.1", RecordType::PTR, normalize_host).unwrap(),
            "192.0.2.1"
        );
    }

    #[test]
    fn parse_caa_keeps_reserved_flag_bits() {
        // Regression: flags were rebuilt from `issuer_critical` alone, so a
        // record published with reserved bits set reported flags=128/0.
        let mut caa = CAA::new_issue(
            true,
            Some(hickory_resolver::proto::rr::Name::from_ascii("letsencrypt.org").unwrap()),
            vec![],
        );
        caa.reserved_flags = 0x01;
        let (flags, tag, value) = parse_caa(&caa);
        assert_eq!(flags, 0x81);
        assert_eq!(tag, "issue");
        assert_eq!(value, "letsencrypt.org");
    }

    // --- Hermetic mock-server tests -----------------------------------
    //
    // These exercise the full resolve() path (normalization →
    // custom-resolver construction → hickory transport → RData conversion)
    // against the shared loopback fixture in `crate::dns::test_support`,
    // without touching the network. The SSRF guards deliberately refuse
    // loopback, so the resolver under test uses the `#[cfg(test)]`-only
    // `allowing_private_hosts` / `with_port` seams, which do not exist in
    // release builds.

    use crate::dns::test_support::{
        mock_dns_resolver, mock_dns_resolver_default, spawn_mock_dns, spawn_mock_dns_fn, MockMode,
        MockReply,
    };

    async fn mock_zone_lookup(record_type: RecordType, domain: &str) -> Vec<DnsRecord> {
        let port = spawn_mock_dns(MockMode::Zone).await;
        mock_dns_resolver(port)
            .resolve(domain, record_type, Some("127.0.0.1"))
            .await
            .unwrap_or_else(|e| panic!("{record_type} lookup against mock must succeed: {e}"))
    }

    #[tokio::test]
    async fn mock_resolve_a_returns_addresses() {
        let records = mock_zone_lookup(RecordType::A, "seer.test").await;
        assert_eq!(records.len(), 2);
        assert!(records.iter().all(|r| r.record_type == RecordType::A));
        assert_eq!(records[0].name, "seer.test");
        assert_eq!(records[0].ttl, 300);
        let addresses: Vec<String> = records
            .iter()
            .map(|r| match &r.data {
                RecordData::A { address } => address.clone(),
                other => panic!("expected A data, got {other:?}"),
            })
            .collect();
        assert!(addresses.contains(&"192.0.2.1".to_string()));
        assert!(addresses.contains(&"192.0.2.2".to_string()));
    }

    #[tokio::test]
    async fn mock_resolve_mx_sorts_by_preference() {
        let records = mock_zone_lookup(RecordType::MX, "seer.test").await;
        let prefs: Vec<u16> = records
            .iter()
            .map(|r| match &r.data {
                RecordData::MX { preference, .. } => *preference,
                other => panic!("expected MX data, got {other:?}"),
            })
            .collect();
        // The zone serves 30, 10, 20 — resolve() must sort ascending.
        assert_eq!(prefs, vec![10, 20, 30]);
        assert!(matches!(
            &records[0].data,
            RecordData::MX { exchange, .. } if exchange == "a.mail.seer.test."
        ));
    }

    #[tokio::test]
    async fn mock_resolve_txt_joins_character_strings() {
        let records = mock_zone_lookup(RecordType::TXT, "seer.test").await;
        assert_eq!(records.len(), 1);
        match &records[0].data {
            RecordData::TXT { text } => assert_eq!(text, "v=spf1 -all"),
            other => panic!("expected TXT data, got {other:?}"),
        }
    }

    #[tokio::test]
    async fn mock_resolve_soa_maps_all_fields() {
        let records = mock_zone_lookup(RecordType::SOA, "seer.test").await;
        assert_eq!(records.len(), 1);
        match &records[0].data {
            RecordData::SOA {
                mname,
                rname,
                serial,
                refresh,
                retry,
                expire,
                minimum,
            } => {
                assert_eq!(mname, "ns1.seer.test.");
                assert_eq!(rname, "hostmaster.seer.test.");
                assert_eq!(*serial, 2026070101);
                assert_eq!(*refresh, 7200);
                assert_eq!(*retry, 3600);
                assert_eq!(*expire, 1209600);
                assert_eq!(*minimum, 300);
            }
            other => panic!("expected SOA data, got {other:?}"),
        }
    }

    #[tokio::test]
    async fn mock_resolve_caa_maps_flags_tag_and_value() {
        let records = mock_zone_lookup(RecordType::CAA, "seer.test").await;
        assert_eq!(records.len(), 2);
        let by_tag = |wanted: &str| {
            records
                .iter()
                .find_map(|r| match &r.data {
                    RecordData::CAA { flags, tag, value } if tag == wanted => {
                        Some((*flags, value.clone()))
                    }
                    _ => None,
                })
                .unwrap_or_else(|| panic!("expected a CAA record with tag {wanted}"))
        };
        // issuer_critical=false → flags 0; true → 128 (RFC 8659 critical bit).
        assert_eq!(by_tag("issue"), (0, "letsencrypt.org".to_string()));
        assert_eq!(
            by_tag("iodef"),
            (128, "mailto:security@seer.test".to_string())
        );
    }

    #[tokio::test]
    async fn mock_resolve_tlsa_hex_encodes_cert_data() {
        let records = mock_zone_lookup(RecordType::TLSA, "_443._tcp.seer.test").await;
        assert_eq!(records.len(), 1);
        match &records[0].data {
            RecordData::TLSA {
                cert_usage,
                selector,
                matching,
                cert_data,
            } => {
                assert_eq!((*cert_usage, *selector, *matching), (3, 1, 1));
                assert_eq!(cert_data, "ABCD01");
            }
            other => panic!("expected TLSA data, got {other:?}"),
        }
    }

    #[tokio::test]
    async fn mock_resolve_sshfp_hex_encodes_fingerprint() {
        let records = mock_zone_lookup(RecordType::SSHFP, "seer.test").await;
        assert_eq!(records.len(), 1);
        match &records[0].data {
            RecordData::SSHFP {
                algorithm,
                fingerprint_type,
                fingerprint,
            } => {
                assert_eq!((*algorithm, *fingerprint_type), (4, 2));
                assert_eq!(fingerprint, "DEADBEEF");
            }
            other => panic!("expected SSHFP data, got {other:?}"),
        }
    }

    #[tokio::test]
    async fn mock_resolve_naptr_decodes_character_strings() {
        let records = mock_zone_lookup(RecordType::NAPTR, "seer.test").await;
        assert_eq!(records.len(), 1);
        match &records[0].data {
            RecordData::NAPTR {
                order,
                preference,
                flags,
                services,
                regexp,
                replacement,
            } => {
                assert_eq!((*order, *preference), (100, 50));
                assert_eq!(flags, "U");
                assert_eq!(services, "E2U+sip");
                assert_eq!(regexp, "!^.*$!sip:info@seer.test!");
                assert_eq!(replacement, ".");
            }
            other => panic!("expected NAPTR data, got {other:?}"),
        }
    }

    #[tokio::test]
    async fn mock_resolve_srv_via_dig_style_name() {
        let records = mock_zone_lookup(RecordType::SRV, "_sip._tcp.seer.test").await;
        assert_eq!(records.len(), 1);
        assert_eq!(records[0].name, "_sip._tcp.seer.test");
        match &records[0].data {
            RecordData::SRV {
                priority,
                weight,
                port,
                target,
            } => {
                assert_eq!((*priority, *weight, *port), (10, 5, 5060));
                assert_eq!(target, "sipserver.seer.test.");
            }
            other => panic!("expected SRV data, got {other:?}"),
        }
    }

    #[tokio::test]
    async fn mock_resolve_ptr_transforms_ip_literal() {
        let records = mock_zone_lookup(RecordType::PTR, "192.0.2.1").await;
        assert_eq!(records.len(), 1);
        // The record is reported under the reverse-DNS name, not the raw IP.
        assert_eq!(records[0].name, "1.2.0.192.in-addr.arpa");
        assert!(matches!(
            &records[0].data,
            RecordData::PTR { target } if target == "ptr.seer.test."
        ));
    }

    #[tokio::test]
    async fn mock_resolve_keeps_www_label() {
        // Regression: `resolve("www.x", CNAME)` queried `x` (normalize_domain
        // strips `www.`), which has no CNAME — an empty, wrong answer.
        let records = mock_zone_lookup(RecordType::CNAME, "www.seer.test").await;
        assert_eq!(records.len(), 1, "{records:?}");
        assert_eq!(records[0].name, "www.seer.test");
        assert_eq!(records[0].data.to_string(), "edge.cdn.test.");
    }

    #[tokio::test]
    async fn mock_resolve_srv_keeps_www_label() {
        let port = spawn_mock_dns_fn(|qname, qtype| match (qname, qtype) {
            ("_sip._tcp.www.seer.test", HickoryRecordType::SRV) => {
                MockReply::Answer(vec![HickoryRData::SRV(
                    hickory_resolver::proto::rr::rdata::SRV::new(
                        10,
                        5,
                        5060,
                        hickory_resolver::proto::rr::Name::from_ascii("sip.seer.test.").unwrap(),
                    ),
                )])
            }
            _ => MockReply::NoData,
        })
        .await;
        let records = mock_dns_resolver(port)
            .resolve(
                "_sip._tcp.www.seer.test",
                RecordType::SRV,
                Some("127.0.0.1"),
            )
            .await
            .expect("SRV against mock");
        assert_eq!(records.len(), 1, "{records:?}");
        assert_eq!(records[0].name, "_sip._tcp.www.seer.test");
    }

    #[tokio::test]
    async fn mock_presence_still_probes_the_apex_for_www_input() {
        // `presence` answers a registration-level question, so it must keep
        // stripping `www.` even though `resolve` no longer does.
        let port = spawn_mock_dns_fn(|qname, qtype| match (qname, qtype) {
            ("seer.test", HickoryRecordType::NS) => MockReply::Answer(vec![HickoryRData::NS(
                hickory_resolver::proto::rr::rdata::NS(
                    hickory_resolver::proto::rr::Name::from_ascii("ns1.seer.test.").unwrap(),
                ),
            )]),
            // What a recursive resolver relays for a name inside the zone:
            // querying `www` itself would read as "no NS" → Absent.
            ("www.seer.test", HickoryRecordType::NS) => MockReply::NoDataWithSoa("seer.test"),
            _ => MockReply::NxDomain,
        })
        .await;
        let resolver = mock_dns_resolver_default(port);
        assert_eq!(
            resolver.presence("www.seer.test").await,
            DnsPresence::Present
        );
    }

    #[tokio::test]
    async fn mock_resolve_ptr_transforms_ipv6_literal() {
        let records = mock_zone_lookup(RecordType::PTR, "2606:4700:4700::1111").await;
        assert_eq!(records.len(), 1, "{records:?}");
        assert_eq!(records[0].data.to_string(), "one.one.one.one.");
    }

    #[tokio::test]
    async fn mock_resolve_any_aggregates_multiple_types() {
        let records = mock_zone_lookup(RecordType::ANY, "seer.test").await;
        // resolve_any fans out to exactly A/AAAA/MX/NS/TXT/SOA/CAA.
        for expected in [
            RecordType::A,
            RecordType::AAAA,
            RecordType::MX,
            RecordType::NS,
            RecordType::TXT,
            RecordType::SOA,
            RecordType::CAA,
        ] {
            assert!(
                records.iter().any(|r| r.record_type == expected),
                "ANY must include {expected} records"
            );
        }
        // 2 A + 1 AAAA + 3 MX + 1 NS + 1 TXT + 1 SOA + 2 CAA = 11
        assert_eq!(records.len(), 11);
    }

    #[tokio::test]
    async fn mock_nodata_folds_to_empty_and_classifies_absent() {
        let port = spawn_mock_dns(MockMode::NoData).await;
        let result = mock_dns_resolver(port)
            .resolve("seer.test", RecordType::NS, Some("127.0.0.1"))
            .await;
        assert!(
            matches!(&result, Ok(records) if records.is_empty()),
            "NODATA must fold to Ok(vec![]), got: {result:?}"
        );
        assert_eq!(classify_ns_presence(&result), DnsPresence::Absent);
    }

    #[tokio::test]
    async fn mock_nxdomain_folds_to_empty_and_classifies_absent() {
        let port = spawn_mock_dns(MockMode::Nxdomain).await;
        let result = mock_dns_resolver(port)
            .resolve("seer.test", RecordType::NS, Some("127.0.0.1"))
            .await;
        assert!(
            matches!(&result, Ok(records) if records.is_empty()),
            "NXDOMAIN must fold to Ok(vec![]), got: {result:?}"
        );
        assert_eq!(classify_ns_presence(&result), DnsPresence::Absent);
    }

    #[tokio::test]
    async fn mock_timeout_errors_and_classifies_unknown() {
        let port = spawn_mock_dns(MockMode::Ignore).await;
        // Short timeout keeps the test fast: 2 attempts × 200ms ≈ 400ms.
        let resolver = DnsResolver::new()
            .with_timeout(Duration::from_millis(200))
            .allowing_private_hosts()
            .with_port(port);
        let result = resolver
            .resolve("seer.test", RecordType::NS, Some("127.0.0.1"))
            .await;
        match &result {
            Err(SeerError::DnsError(_)) => {}
            other => panic!("unanswered query must surface a DnsError, got: {other:?}"),
        }
        assert_eq!(classify_ns_presence(&result), DnsPresence::Unknown);
    }

    #[tokio::test]
    async fn resolve_type_rejects_composite_types_consistently() {
        // SRV and ANY are composite queries owned by resolve(); the shared
        // dispatch must reject them identically for every entry point. The
        // rejection happens before any I/O, so this test never contacts a
        // server despite using the default resolver.
        let r = DnsResolver::new();
        for composite in [RecordType::SRV, RecordType::ANY] {
            let err = r
                .resolve_type(&r.default_resolver, "seer.test", composite)
                .await
                .expect_err("composite types must be rejected by resolve_type");
            assert_eq!(
                err.to_string(),
                unsupported_record_type(composite).to_string()
            );
        }
    }
}