[−][src]Struct rusoto_swf::RegisterWorkflowTypeInput
Fields
default_child_policy: Option<String>
If set, specifies the default policy to use for the child workflow executions when a workflow execution of this type is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This default can be overridden when starting a workflow execution using the StartWorkflowExecution action or the StartChildWorkflowExecution
Decision.
The supported child policies are:
-
TERMINATE
– The child executions are terminated. -
REQUEST_CANCEL
– A request to cancel is attempted for each child execution by recording aWorkflowExecutionCancelRequested
event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event. -
ABANDON
– No action is taken. The child executions continue to run.
default_execution_start_to_close_timeout: Option<String>
If set, specifies the default maximum duration for executions of this workflow type. You can override this default when starting an execution through the StartWorkflowExecution Action or StartChildWorkflowExecution
Decision.
The duration is specified in seconds; an integer greater than or equal to 0. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for defaultExecutionStartToCloseTimeout
; there is a one-year max limit on the time that a workflow execution can run. Exceeding this limit always causes the workflow execution to time out.
default_lambda_role: Option<String>
The default IAM role attached to this workflow type.
Executions of this workflow type need IAM roles to invoke Lambda functions. If you don't specify an IAM role when you start this workflow type, the default Lambda role is attached to the execution. For more information, see http://docs.aws.amazon.com/amazonswf/latest/developerguide/lambda-task.html in the Amazon SWF Developer Guide.
default_task_list: Option<TaskList>
If set, specifies the default task list to use for scheduling decision tasks for executions of this workflow type. This default is used only if a task list isn't provided when starting the execution through the StartWorkflowExecution Action or StartChildWorkflowExecution
Decision.
default_task_priority: Option<String>
The default task priority to assign to the workflow type. If not assigned, then 0
is used. Valid values are integers that range from Java's Integer.MIN_VALUE
(-2147483648) to Integer.MAX_VALUE
(2147483647). Higher numbers indicate higher priority.
For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.
default_task_start_to_close_timeout: Option<String>
If set, specifies the default maximum duration of decision tasks for this workflow type. This default can be overridden when starting a workflow execution using the StartWorkflowExecution action or the StartChildWorkflowExecution
Decision.
The duration is specified in seconds, an integer greater than or equal to 0
. You can use NONE
to specify unlimited duration.
description: Option<String>
Textual description of the workflow type.
domain: String
The name of the domain in which to register the workflow type.
name: String
The name of the workflow type.
The specified string must not start or end with whitespace. It must not contain a :
(colon), /
(slash), |
(vertical bar), or any control characters (\u0000-\u001f
| \u007f-\u009f
). Also, it must not contain the literal string arn
.
version: String
The version of the workflow type.
The workflow type consists of the name and version, the combination of which must be unique within the domain. To get a list of all currently registered workflow types, use the ListWorkflowTypes action.
The specified string must not start or end with whitespace. It must not contain a :
(colon), /
(slash), |
(vertical bar), or any control characters (\u0000-\u001f
| \u007f-\u009f
). Also, it must not contain the literal string arn
.
Trait Implementations
impl PartialEq<RegisterWorkflowTypeInput> for RegisterWorkflowTypeInput
[src]
impl PartialEq<RegisterWorkflowTypeInput> for RegisterWorkflowTypeInput
fn eq(&self, other: &RegisterWorkflowTypeInput) -> bool
[src]
fn eq(&self, other: &RegisterWorkflowTypeInput) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &RegisterWorkflowTypeInput) -> bool
[src]
fn ne(&self, other: &RegisterWorkflowTypeInput) -> bool
This method tests for !=
.
impl Default for RegisterWorkflowTypeInput
[src]
impl Default for RegisterWorkflowTypeInput
fn default() -> RegisterWorkflowTypeInput
[src]
fn default() -> RegisterWorkflowTypeInput
Returns the "default value" for a type. Read more
impl Clone for RegisterWorkflowTypeInput
[src]
impl Clone for RegisterWorkflowTypeInput
fn clone(&self) -> RegisterWorkflowTypeInput
[src]
fn clone(&self) -> RegisterWorkflowTypeInput
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Debug for RegisterWorkflowTypeInput
[src]
impl Debug for RegisterWorkflowTypeInput
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl Serialize for RegisterWorkflowTypeInput
[src]
impl Serialize for RegisterWorkflowTypeInput
Auto Trait Implementations
impl Send for RegisterWorkflowTypeInput
impl Send for RegisterWorkflowTypeInput
impl Sync for RegisterWorkflowTypeInput
impl Sync for RegisterWorkflowTypeInput
Blanket Implementations
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self
impl<T> Erased for T
impl<T> Erased for T