[−][src]Struct rusoto_swf::ListClosedWorkflowExecutionsInput
Fields
close_status_filter: Option<CloseStatusFilter>
If specified, only workflow executions that match this close status are listed. For example, if TERMINATED is specified, then only TERMINATED workflow executions are listed.
closeStatusFilter
, executionFilter
, typeFilter
and tagFilter
are mutually exclusive. You can specify at most one of these in a request.
close_time_filter: Option<ExecutionTimeFilter>
If specified, the workflow executions are included in the returned results based on whether their close times are within the range specified by this filter. Also, if this parameter is specified, the returned results are ordered by their close times.
startTimeFilter
and closeTimeFilter
are mutually exclusive. You must specify one of these in a request but not both.
domain: String
The name of the domain that contains the workflow executions to list.
execution_filter: Option<WorkflowExecutionFilter>
If specified, only workflow executions matching the workflow ID specified in the filter are returned.
closeStatusFilter
, executionFilter
, typeFilter
and tagFilter
are mutually exclusive. You can specify at most one of these in a request.
maximum_page_size: Option<i64>
The maximum number of results that are returned per call. nextPageToken
can be used to obtain futher pages of results. The default is 1000, which is the maximum allowed page size. You can, however, specify a page size smaller than the maximum.
This is an upper limit only; the actual number of results returned per call may be fewer than the specified maximum.
next_page_token: Option<String>
If a NextPageToken
was returned by a previous call, there are more results available. To retrieve the next page of results, make the call again using the returned token in nextPageToken
. Keep all other arguments unchanged.
The configured maximumPageSize
determines how many results can be returned in a single call.
reverse_order: Option<bool>
When set to true
, returns the results in reverse order. By default the results are returned in descending order of the start or the close time of the executions.
start_time_filter: Option<ExecutionTimeFilter>
If specified, the workflow executions are included in the returned results based on whether their start times are within the range specified by this filter. Also, if this parameter is specified, the returned results are ordered by their start times.
startTimeFilter
and closeTimeFilter
are mutually exclusive. You must specify one of these in a request but not both.
tag_filter: Option<TagFilter>
If specified, only executions that have the matching tag are listed.
closeStatusFilter
, executionFilter
, typeFilter
and tagFilter
are mutually exclusive. You can specify at most one of these in a request.
type_filter: Option<WorkflowTypeFilter>
If specified, only executions of the type specified in the filter are returned.
closeStatusFilter
, executionFilter
, typeFilter
and tagFilter
are mutually exclusive. You can specify at most one of these in a request.
Trait Implementations
impl PartialEq<ListClosedWorkflowExecutionsInput> for ListClosedWorkflowExecutionsInput
[src]
impl PartialEq<ListClosedWorkflowExecutionsInput> for ListClosedWorkflowExecutionsInput
fn eq(&self, other: &ListClosedWorkflowExecutionsInput) -> bool
[src]
fn eq(&self, other: &ListClosedWorkflowExecutionsInput) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &ListClosedWorkflowExecutionsInput) -> bool
[src]
fn ne(&self, other: &ListClosedWorkflowExecutionsInput) -> bool
This method tests for !=
.
impl Default for ListClosedWorkflowExecutionsInput
[src]
impl Default for ListClosedWorkflowExecutionsInput
fn default() -> ListClosedWorkflowExecutionsInput
[src]
fn default() -> ListClosedWorkflowExecutionsInput
Returns the "default value" for a type. Read more
impl Clone for ListClosedWorkflowExecutionsInput
[src]
impl Clone for ListClosedWorkflowExecutionsInput
fn clone(&self) -> ListClosedWorkflowExecutionsInput
[src]
fn clone(&self) -> ListClosedWorkflowExecutionsInput
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Debug for ListClosedWorkflowExecutionsInput
[src]
impl Debug for ListClosedWorkflowExecutionsInput
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl Serialize for ListClosedWorkflowExecutionsInput
[src]
impl Serialize for ListClosedWorkflowExecutionsInput
Auto Trait Implementations
impl Send for ListClosedWorkflowExecutionsInput
impl Send for ListClosedWorkflowExecutionsInput
impl Sync for ListClosedWorkflowExecutionsInput
impl Sync for ListClosedWorkflowExecutionsInput
Blanket Implementations
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self
impl<T> Erased for T
impl<T> Erased for T