[−][src]Struct rusoto_mediaconvert::H265Settings
Settings for H265 codec
Fields
adaptive_quantization: Option<String>
alternate_transfer_function_sei: Option<String>
bitrate: Option<i64>
Average bitrate in bits/second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
codec_level: Option<String>
codec_profile: Option<String>
flicker_adaptive_quantization: Option<String>
framerate_control: Option<String>
framerate_conversion_algorithm: Option<String>
framerate_denominator: Option<i64>
Framerate denominator.
framerate_numerator: Option<i64>
Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.
gop_b_reference: Option<String>
gop_closed_cadence: Option<i64>
Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
gop_size: Option<f64>
GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
gop_size_units: Option<String>
hrd_buffer_initial_fill_percentage: Option<i64>
Percentage of the buffer that should initially be filled (HRD buffer model).
hrd_buffer_size: Option<i64>
Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
interlace_mode: Option<String>
max_bitrate: Option<i64>
Maximum bitrate in bits/second.
min_i_interval: Option<i64>
Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
number_b_frames_between_reference_frames: Option<i64>
Number of B-frames between reference frames.
number_reference_frames: Option<i64>
Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
par_control: Option<String>
par_denominator: Option<i64>
Pixel Aspect Ratio denominator.
par_numerator: Option<i64>
Pixel Aspect Ratio numerator.
quality_tuning_level: Option<String>
rate_control_mode: Option<String>
sample_adaptive_offset_filter_mode: Option<String>
scene_change_detect: Option<String>
slices: Option<i64>
Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
slow_pal: Option<String>
spatial_adaptive_quantization: Option<String>
telecine: Option<String>
temporal_adaptive_quantization: Option<String>
temporal_ids: Option<String>
tiles: Option<String>
unregistered_sei_timecode: Option<String>
write_mp_4_packaging_type: Option<String>
Trait Implementations
impl Clone for H265Settings
[src]
impl Clone for H265Settings
fn clone(&self) -> H265Settings
[src]
fn clone(&self) -> H265Settings
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Default for H265Settings
[src]
impl Default for H265Settings
fn default() -> H265Settings
[src]
fn default() -> H265Settings
impl PartialEq<H265Settings> for H265Settings
[src]
impl PartialEq<H265Settings> for H265Settings
fn eq(&self, other: &H265Settings) -> bool
[src]
fn eq(&self, other: &H265Settings) -> bool
fn ne(&self, other: &H265Settings) -> bool
[src]
fn ne(&self, other: &H265Settings) -> bool
impl Debug for H265Settings
[src]
impl Debug for H265Settings
impl Serialize for H265Settings
[src]
impl Serialize for H265Settings
fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
__S: Serializer,
[src]
fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
__S: Serializer,
impl<'de> Deserialize<'de> for H265Settings
[src]
impl<'de> Deserialize<'de> for H265Settings
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
__D: Deserializer<'de>,
[src]
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
__D: Deserializer<'de>,
Auto Trait Implementations
impl Send for H265Settings
impl Send for H265Settings
impl Sync for H265Settings
impl Sync for H265Settings
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
impl<T> DeserializeOwned for T where
T: Deserialize<'de>,
[src]
impl<T> DeserializeOwned for T where
T: Deserialize<'de>,
impl<T> Erased for T
impl<T> Erased for T
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self