[−][src]Struct rusoto_lex_runtime::PostContentResponse
Fields
audio_stream: Option<Vec<u8>>
The prompt (or statement) to convey to the user. This is based on the bot configuration and context. For example, if Amazon Lex did not understand the user intent, it sends the clarificationPrompt
configured for the bot. If the intent requires confirmation before taking the fulfillment action, it sends the confirmationPrompt
. Another example: Suppose that the Lambda function successfully fulfilled the intent, and sent a message to convey to the user. Then Amazon Lex sends that message in the response.
content_type: Option<String>
Content type as specified in the Accept
HTTP header in the request.
dialog_state: Option<String>
Identifies the current state of the user interaction. Amazon Lex returns one of the following values as dialogState
. The client can optionally use this information to customize the user interface.
-
ElicitIntent
- Amazon Lex wants to elicit the user's intent. Consider the following examples:For example, a user might utter an intent ("I want to order a pizza"). If Amazon Lex cannot infer the user intent from this utterance, it will return this dialog state.
-
ConfirmIntent
- Amazon Lex is expecting a "yes" or "no" response.For example, Amazon Lex wants user confirmation before fulfilling an intent. Instead of a simple "yes" or "no" response, a user might respond with additional information. For example, "yes, but make it a thick crust pizza" or "no, I want to order a drink." Amazon Lex can process such additional information (in these examples, update the crust type slot or change the intent from OrderPizza to OrderDrink).
-
ElicitSlot
- Amazon Lex is expecting the value of a slot for the current intent.For example, suppose that in the response Amazon Lex sends this message: "What size pizza would you like?". A user might reply with the slot value (e.g., "medium"). The user might also provide additional information in the response (e.g., "medium thick crust pizza"). Amazon Lex can process such additional information appropriately.
-
Fulfilled
- Conveys that the Lambda function has successfully fulfilled the intent. -
ReadyForFulfillment
- Conveys that the client has to fulfill the request. -
Failed
- Conveys that the conversation with the user failed.This can happen for various reasons, including that the user does not provide an appropriate response to prompts from the service (you can configure how many times Amazon Lex can prompt a user for specific information), or if the Lambda function fails to fulfill the intent.
input_transcript: Option<String>
The text used to process the request.
If the input was an audio stream, the inputTranscript
field contains the text extracted from the audio stream. This is the text that is actually processed to recognize intents and slot values. You can use this information to determine if Amazon Lex is correctly processing the audio that you send.
intent_name: Option<String>
Current user intent that Amazon Lex is aware of.
message: Option<String>
The message to convey to the user. The message can come from the bot's configuration or from a Lambda function.
If the intent is not configured with a Lambda function, or if the Lambda function returned Delegate
as the dialogAction.type
its response, Amazon Lex decides on the next course of action and selects an appropriate message from the bot's configuration based on the current interaction context. For example, if Amazon Lex isn't able to understand user input, it uses a clarification prompt message.
When you create an intent you can assign messages to groups. When messages are assigned to groups Amazon Lex returns one message from each group in the response. The message field is an escaped JSON string containing the messages. For more information about the structure of the JSON string returned, see msg-prompts-formats.
If the Lambda function returns a message, Amazon Lex passes it to the client in its response.
message_format: Option<String>
The format of the response message. One of the following values:
-
PlainText
- The message contains plain UTF-8 text. -
CustomPayload
- The message is a custom format for the client. -
SSML
- The message contains text formatted for voice output. -
Composite
- The message contains an escaped JSON object containing one or more messages from the groups that messages were assigned to when the intent was created.
session_attributes: Option<String>
Map of key/value pairs representing the session-specific context information.
slot_to_elicit: Option<String>
If the dialogState
value is ElicitSlot
, returns the name of the slot for which Amazon Lex is eliciting a value.
slots: Option<String>
Map of zero or more intent slots (name/value pairs) Amazon Lex detected from the user input during the conversation.
Amazon Lex creates a resolution list containing likely values for a slot. The value that it returns is determined by the valueSelectionStrategy
selected when the slot type was created or updated. If valueSelectionStrategy
is set to ORIGINAL_VALUE
, the value provided by the user is returned, if the user value is similar to the slot values. If valueSelectionStrategy
is set to TOP_RESOLUTION
Amazon Lex returns the first value in the resolution list or, if there is no resolution list, null. If you don't specify a valueSelectionStrategy
, the default is ORIGINAL_VALUE
.
Trait Implementations
impl PartialEq<PostContentResponse> for PostContentResponse
[src]
impl PartialEq<PostContentResponse> for PostContentResponse
fn eq(&self, other: &PostContentResponse) -> bool
[src]
fn eq(&self, other: &PostContentResponse) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &PostContentResponse) -> bool
[src]
fn ne(&self, other: &PostContentResponse) -> bool
This method tests for !=
.
impl Default for PostContentResponse
[src]
impl Default for PostContentResponse
fn default() -> PostContentResponse
[src]
fn default() -> PostContentResponse
Returns the "default value" for a type. Read more
impl Clone for PostContentResponse
[src]
impl Clone for PostContentResponse
fn clone(&self) -> PostContentResponse
[src]
fn clone(&self) -> PostContentResponse
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Debug for PostContentResponse
[src]
impl Debug for PostContentResponse
Auto Trait Implementations
impl Send for PostContentResponse
impl Send for PostContentResponse
impl Sync for PostContentResponse
impl Sync for PostContentResponse
Blanket Implementations
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self
impl<T> Erased for T
impl<T> Erased for T