[−][src]Struct rusoto_dynamodb::CreateTableInput
Represents the input of a CreateTable
operation.
Fields
attribute_definitions: Vec<AttributeDefinition>
An array of attributes that describe the key schema for the table and indexes.
global_secondary_indexes: Option<Vec<GlobalSecondaryIndex>>
One or more global secondary indexes (the maximum is five) to be created on the table. Each global secondary index in the array includes the following:
-
IndexName
- The name of the global secondary index. Must be unique only for this table. -
KeySchema
- Specifies the key schema for the global secondary index. -
Projection
- Specifies attributes that are copied (projected) from the table into the index. These are in addition to the primary key attributes and index key attributes, which are automatically projected. Each attribute specification is composed of:-
ProjectionType
- One of the following:-
KEYS_ONLY
- Only the index and primary keys are projected into the index. -
INCLUDE
- Only the specified table attributes are projected into the index. The list of projected attributes are inNonKeyAttributes
. -
ALL
- All of the table attributes are projected into the index.
-
-
NonKeyAttributes
- A list of one or more non-key attribute names that are projected into the secondary index. The total count of attributes provided inNonKeyAttributes
, summed across all of the secondary indexes, must not exceed 20. If you project the same attribute into two different indexes, this counts as two distinct attributes when determining the total.
-
-
ProvisionedThroughput
- The provisioned throughput settings for the global secondary index, consisting of read and write capacity units.
key_schema: Vec<KeySchemaElement>
Specifies the attributes that make up the primary key for a table or an index. The attributes in KeySchema
must also be defined in the AttributeDefinitions
array. For more information, see Data Model in the Amazon DynamoDB Developer Guide.
Each KeySchemaElement
in the array is composed of:
-
AttributeName
- The name of this key attribute. -
KeyType
- The role that the key attribute will assume:-
HASH
- partition key -
RANGE
- sort key
-
The partition key of an item is also known as its hash attribute. The term "hash attribute" derives from DynamoDB' usage of an internal hash function to evenly distribute data items across partitions, based on their partition key values.
The sort key of an item is also known as its range attribute. The term "range attribute" derives from the way DynamoDB stores items with the same partition key physically close together, in sorted order by the sort key value.
For a simple primary key (partition key), you must provide exactly one element with a KeyType
of HASH
.
For a composite primary key (partition key and sort key), you must provide exactly two elements, in this order: The first element must have a KeyType
of HASH
, and the second element must have a KeyType
of RANGE
.
For more information, see Specifying the Primary Key in the Amazon DynamoDB Developer Guide.
local_secondary_indexes: Option<Vec<LocalSecondaryIndex>>
One or more local secondary indexes (the maximum is five) to be created on the table. Each index is scoped to a given partition key value. There is a 10 GB size limit per partition key value; otherwise, the size of a local secondary index is unconstrained.
Each local secondary index in the array includes the following:
-
IndexName
- The name of the local secondary index. Must be unique only for this table. -
KeySchema
- Specifies the key schema for the local secondary index. The key schema must begin with the same partition key as the table. -
Projection
- Specifies attributes that are copied (projected) from the table into the index. These are in addition to the primary key attributes and index key attributes, which are automatically projected. Each attribute specification is composed of:-
ProjectionType
- One of the following:-
KEYS_ONLY
- Only the index and primary keys are projected into the index. -
INCLUDE
- Only the specified table attributes are projected into the index. The list of projected attributes are inNonKeyAttributes
. -
ALL
- All of the table attributes are projected into the index.
-
-
NonKeyAttributes
- A list of one or more non-key attribute names that are projected into the secondary index. The total count of attributes provided inNonKeyAttributes
, summed across all of the secondary indexes, must not exceed 20. If you project the same attribute into two different indexes, this counts as two distinct attributes when determining the total.
-
provisioned_throughput: ProvisionedThroughput
Represents the provisioned throughput settings for a specified table or index. The settings can be modified using the UpdateTable
operation.
For current minimum and maximum provisioned throughput values, see Limits in the Amazon DynamoDB Developer Guide.
sse_specification: Option<SSESpecification>
Represents the settings used to enable server-side encryption.
stream_specification: Option<StreamSpecification>
The settings for DynamoDB Streams on the table. These settings consist of:
-
StreamEnabled
- Indicates whether Streams is to be enabled (true) or disabled (false). -
StreamViewType
- When an item in the table is modified,StreamViewType
determines what information is written to the table's stream. Valid values forStreamViewType
are:-
KEYSONLY
- Only the key attributes of the modified item are written to the stream. -
NEWIMAGE
- The entire item, as it appears after it was modified, is written to the stream. -
OLDIMAGE
- The entire item, as it appeared before it was modified, is written to the stream. -
NEWANDOLDIMAGES
- Both the new and the old item images of the item are written to the stream.
-
table_name: String
The name of the table to create.
Trait Implementations
impl Clone for CreateTableInput
[src]
impl Clone for CreateTableInput
fn clone(&self) -> CreateTableInput
[src]
fn clone(&self) -> CreateTableInput
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Default for CreateTableInput
[src]
impl Default for CreateTableInput
fn default() -> CreateTableInput
[src]
fn default() -> CreateTableInput
Returns the "default value" for a type. Read more
impl PartialEq<CreateTableInput> for CreateTableInput
[src]
impl PartialEq<CreateTableInput> for CreateTableInput
fn eq(&self, other: &CreateTableInput) -> bool
[src]
fn eq(&self, other: &CreateTableInput) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &CreateTableInput) -> bool
[src]
fn ne(&self, other: &CreateTableInput) -> bool
This method tests for !=
.
impl Debug for CreateTableInput
[src]
impl Debug for CreateTableInput
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl Serialize for CreateTableInput
[src]
impl Serialize for CreateTableInput
Auto Trait Implementations
impl Send for CreateTableInput
impl Send for CreateTableInput
impl Sync for CreateTableInput
impl Sync for CreateTableInput
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Erased for T
impl<T> Erased for T
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self