[−][src]Struct rusoto_directconnect::VirtualInterface
Information about a virtual interface.
Fields
address_family: Option<String>
The address family for the BGP peer.
amazon_address: Option<String>
The IP address assigned to the Amazon interface.
amazon_side_asn: Option<i64>
The autonomous system number (ASN) for the Amazon side of the connection.
asn: Option<i64>
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
auth_key: Option<String>
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
aws_device_v2: Option<String>
The Direct Connect endpoint on which the virtual interface terminates.
bgp_peers: Option<Vec<BGPPeer>>
The BGP peers configured on this virtual interface.
connection_id: Option<String>
The ID of the connection.
customer_address: Option<String>
The IP address assigned to the customer interface.
customer_router_config: Option<String>
The customer router configuration.
direct_connect_gateway_id: Option<String>
The ID of the Direct Connect gateway.
jumbo_frame_capable: Option<bool>
Indicates whether jumbo frames (9001 MTU) are supported.
location: Option<String>
The location of the connection.
mtu: Option<i64>
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
owner_account: Option<String>
The ID of the AWS account that owns the virtual interface.
region: Option<String>
The AWS Region where the virtual interface is located.
route_filter_prefixes: Option<Vec<RouteFilterPrefix>>
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
Any tags assigned to the virtual interface.
virtual_gateway_id: Option<String>
The ID of the virtual private gateway. Applies only to private virtual interfaces.
virtual_interface_id: Option<String>
The ID of the virtual interface.
virtual_interface_name: Option<String>
The name of the virtual interface assigned by the customer network.
virtual_interface_state: Option<String>
The state of the virtual interface. The following are the possible values:
-
confirming
: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner. -
verifying
: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created. -
pending
: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic. -
available
: A virtual interface that is able to forward traffic. -
down
: A virtual interface that is BGP down. -
deleting
: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic. -
deleted
: A virtual interface that cannot forward traffic. -
rejected
: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in theConfirming
state is deleted by the virtual interface owner, the virtual interface enters theRejected
state. -
unknown
: The state of the virtual interface is not available.
virtual_interface_type: Option<String>
The type of virtual interface. The possible values are private
and public
.
vlan: Option<i64>
The ID of the VLAN.
Trait Implementations
impl Clone for VirtualInterface
[src]
fn clone(&self) -> VirtualInterface
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Default for VirtualInterface
[src]
fn default() -> VirtualInterface
[src]
impl PartialEq<VirtualInterface> for VirtualInterface
[src]
fn eq(&self, other: &VirtualInterface) -> bool
[src]
fn ne(&self, other: &VirtualInterface) -> bool
[src]
impl Debug for VirtualInterface
[src]
impl StructuralPartialEq for VirtualInterface
[src]
impl<'de> Deserialize<'de> for VirtualInterface
[src]
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
__D: Deserializer<'de>,
[src]
__D: Deserializer<'de>,
Auto Trait Implementations
impl Send for VirtualInterface
impl Sync for VirtualInterface
impl Unpin for VirtualInterface
impl UnwindSafe for VirtualInterface
impl RefUnwindSafe for VirtualInterface
Blanket Implementations
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> DeserializeOwned for T where
T: Deserialize<'de>,
[src]
T: Deserialize<'de>,
impl<T> Same<T> for T
type Output = T
Should always be Self