Type Definition rsl10_pac::rf::rf_reg1a::R

type R = R<u32, RF_REG1A>;

Reader of register RF_REG1A

Methods

impl R

pub fn att_ctrl_att_ctrl_max(&self) -> ATT_CTRL_ATT_CTRL_MAX_R

Bits 28:31 - Maximum attenuation level in AGC algorithm

pub fn att_ctrl_set_rx_att_ctrl(&self) -> ATT_CTRL_SET_RX_ATT_CTRL_R

Bits 24:27 - Attuenuation level if the AGC is bypassed

pub fn rssi_ctrl_agc_decay_tau(&self) -> RSSI_CTRL_AGC_DECAY_TAU_R

Bits 22:23 - Time constant of the decay speed; high values corresponds to a slow decay

pub fn rssi_ctrl_agc_use_lna(&self) -> RSSI_CTRL_AGC_USE_LNA_R

Bit 21 - If set to 1 the AGC algorithm uses the LNA bias.

pub fn rssi_ctrl_agc_mode(&self) -> RSSI_CTRL_AGC_MODE_R

Bit 20 - Select the AGC algorithm: 0 -> old algorithm, 1 -> new algorithm

pub fn rssi_ctrl_agc_wait(&self) -> RSSI_CTRL_AGC_WAIT_R

Bits 18:19 - Sets the wait time of the AGC after switching between states: 00 => don't wait, 01 => wait 1x RSSI filtering period, 10 => wait 2x RSSI filtering period, 11 => wait 3x RSSI filtering period

pub fn rssi_ctrl_payload_blocks_agc(&self) -> RSSI_CTRL_PAYLOAD_BLOCKS_AGC_R

Bit 17 - If set to 1, the AGC is blocked during the payload

pub fn rssi_ctrl_bypass_agc(&self) -> RSSI_CTRL_BYPASS_AGC_R

Bit 16 - If set to 1, the AGC algorithm is bypassed

pub fn filter_bias_iq_fi_bw(&self) -> FILTER_BIAS_IQ_FI_BW_R

Bits 8:12 - Bias for the bandwidth of the channel filter

pub fn filter_bias_iq_fi_fc(&self) -> FILTER_BIAS_IQ_FI_FC_R

Bits 0:4 - Bias for the central frequency of the channel filter