[][src]Type Definition rsl10_pac::bb::bb_rwbbcntl::R

type R = R<u32, BB_RWBBCNTL>;

Reader of register BB_RWBBCNTL

Methods

impl R[src]

pub fn master_soft_rst(&self) -> MASTER_SOFT_RST_R[src]

Bit 31 - Reset the complete system except registers and timing generator

pub fn master_tgsoft_rst(&self) -> MASTER_TGSOFT_RST_R[src]

Bit 30 - Reset the timing generator

pub fn reg_soft_rst(&self) -> REG_SOFT_RST_R[src]

Bit 29 - Reset the complete register block

pub fn swint_req(&self) -> SWINT_REQ_R[src]

Bit 28 - Forces the generation of ble_sw_irq

pub fn rftest_abort(&self) -> RFTEST_ABORT_R[src]

Bit 26 - Abort the current RF testing defined as per CS-FORMAT

[src]

Bit 25 - Abort the current scan window

pub fn scan_abort(&self) -> SCAN_ABORT_R[src]

Bit 24 - Abort the current advertising event

pub fn md_dsb(&self) -> MD_DSB_R[src]

Bit 22 - Allow a single Tx/Rx exchange whatever the MD bits are

pub fn sn_dsb(&self) -> SN_DSB_R[src]

Bit 21 - Disable sequence number management

pub fn nesn_dsb(&self) -> NESN_DSB_R[src]

Bit 20 - Disable acknowledge scheme

pub fn crypt_dsb(&self) -> CRYPT_DSB_R[src]

Bit 19 - Disable encryption / decryption

pub fn whit_dsb(&self) -> WHIT_DSB_R[src]

Bit 18 - Disable whitening

pub fn crc_dsb(&self) -> CRC_DSB_R[src]

Bit 17 - Disable CRC stripping

pub fn hop_remap_dsb(&self) -> HOP_REMAP_DSB_R[src]

Bit 16 - Disable frequency hopping remapping algorithm

pub fn advertfilt_en(&self) -> ADVERTFILT_EN_R[src]

Bit 9 - Advertising channels error filtering enable control

pub fn rwble_en(&self) -> RWBLE_EN_R[src]

Bit 8 - Enable RW-BLE core exchange table pre-fetch mechanism

pub fn rxwinszdef(&self) -> RXWINSZDEF_R[src]

Bits 4:7 - Default Rx Window size in us (used when device is master connected or performs its second receipt)

pub fn syncerr(&self) -> SYNCERR_R[src]

Bits 0:2 - Indicates the maximum number of errors allowed to recognize the synchronization word