Struct probe_rs::architecture::arm::sequences::atsame5x::DsuStatusA
source · pub struct DsuStatusA(pub u8);
Expand description
Device Service Unit Control Register, DSU - CTRL
Tuple Fields§
§0: u8
Implementations§
source§impl DsuStatusA
impl DsuStatusA
sourcepub fn perr(&self) -> bool
pub fn perr(&self) -> bool
Protection Error Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Protection Error bit. This bit is set when a command that is not allowed in Protected state is issued.
sourcepub fn fail(&self) -> bool
pub fn fail(&self) -> bool
Failure Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Failure bit. This bit is set when a DSU operation failure is detected.
sourcepub fn berr(&self) -> bool
pub fn berr(&self) -> bool
Bus Error Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Bus Error bit. This bit is set when a bus error is detected.
sourcepub fn crstext(&self) -> bool
pub fn crstext(&self) -> bool
CPU Reset Phase Extension Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the CPU Reset Phase Extension bit. This bit is set when a debug adapter Cold-Plugging is detected, which extends the CPU Reset phase.
sourcepub fn done(&self) -> bool
pub fn done(&self) -> bool
Done Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Done bit. This bit is set when a DSU operation is completed.
sourcepub fn set_perr(&mut self, value: bool)
pub fn set_perr(&mut self, value: bool)
Protection Error Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Protection Error bit. This bit is set when a command that is not allowed in Protected state is issued.
sourcepub fn set_fail(&mut self, value: bool)
pub fn set_fail(&mut self, value: bool)
Failure Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Failure bit. This bit is set when a DSU operation failure is detected.
sourcepub fn set_berr(&mut self, value: bool)
pub fn set_berr(&mut self, value: bool)
Bus Error Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the Bus Error bit. This bit is set when a bus error is detected.
sourcepub fn set_crstext(&mut self, value: bool)
pub fn set_crstext(&mut self, value: bool)
CPU Reset Phase Extension Writing a ‘0’ to this bit has no effect. Writing a ‘1’ to this bit clears the CPU Reset Phase Extension bit. This bit is set when a debug adapter Cold-Plugging is detected, which extends the CPU Reset phase.
Trait Implementations§
source§impl<T> BitRangeMut<T> for DsuStatusAwhere
u8: BitRangeMut<T>,
impl<T> BitRangeMut<T> for DsuStatusAwhere
u8: BitRangeMut<T>,
source§fn set_bit_range(&mut self, msb: usize, lsb: usize, value: T)
fn set_bit_range(&mut self, msb: usize, lsb: usize, value: T)
source§impl Clone for DsuStatusA
impl Clone for DsuStatusA
source§fn clone(&self) -> DsuStatusA
fn clone(&self) -> DsuStatusA
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for DsuStatusA
impl Debug for DsuStatusA
source§impl From<DsuStatusA> for u8
impl From<DsuStatusA> for u8
source§fn from(value: DsuStatusA) -> Self
fn from(value: DsuStatusA) -> Self
source§impl From<u8> for DsuStatusA
impl From<u8> for DsuStatusA
impl Copy for DsuStatusA
Auto Trait Implementations§
impl RefUnwindSafe for DsuStatusA
impl Send for DsuStatusA
impl Sync for DsuStatusA
impl Unpin for DsuStatusA
impl UnwindSafe for DsuStatusA
Blanket Implementations§
source§impl<T> BitMut for Twhere
T: BitRangeMut<u8>,
impl<T> BitMut for Twhere
T: BitRangeMut<u8>,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
self
, then passes self.as_mut()
into the pipe
function.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
.tap_ref_mut()
only in debug builds, and is erased in release
builds.