Struct otter_nodejs_tests::otter_support::crates::rand::distributions::uniform::UniformChar
source · [−]pub struct UniformChar { /* private fields */ }Expand description
The back-end implementing UniformSampler for char.
Unless you are implementing UniformSampler for your own type, this type
should not be used directly, use Uniform instead.
This differs from integer range sampling since the range 0xD800..=0xDFFF
are used for surrogate pairs in UCS and UTF-16, and consequently are not
valid Unicode code points. We must therefore avoid sampling values in this
range.
Trait Implementations
sourceimpl Clone for UniformChar
impl Clone for UniformChar
sourcefn clone(&self) -> UniformChar
fn clone(&self) -> UniformChar
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
sourceimpl Debug for UniformChar
impl Debug for UniformChar
sourceimpl UniformSampler for UniformChar
impl UniformSampler for UniformChar
sourcefn new<B1, B2>(low_b: B1, high_b: B2) -> UniformChar where
B1: SampleBorrow<<UniformChar as UniformSampler>::X>,
B2: SampleBorrow<<UniformChar as UniformSampler>::X>,
fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformChar where
B1: SampleBorrow<<UniformChar as UniformSampler>::X>,
B2: SampleBorrow<<UniformChar as UniformSampler>::X>,
Construct self, with inclusive lower bound and exclusive upper bound
[low, high). Read more
sourcefn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformChar where
B1: SampleBorrow<<UniformChar as UniformSampler>::X>,
B2: SampleBorrow<<UniformChar as UniformSampler>::X>,
fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformChar where
B1: SampleBorrow<<UniformChar as UniformSampler>::X>,
B2: SampleBorrow<<UniformChar as UniformSampler>::X>,
Construct self, with inclusive bounds [low, high]. Read more
sourcefn sample<R>(&self, rng: &mut R) -> <UniformChar as UniformSampler>::X where
R: Rng + ?Sized,
fn sample<R>(&self, rng: &mut R) -> <UniformChar as UniformSampler>::X where
R: Rng + ?Sized,
Sample a value.
sourcefn sample_single<R, B1, B2>(low: B1, high: B2, rng: &mut R) -> Self::X where
R: Rng + ?Sized,
B1: SampleBorrow<Self::X>,
B2: SampleBorrow<Self::X>,
fn sample_single<R, B1, B2>(low: B1, high: B2, rng: &mut R) -> Self::X where
R: Rng + ?Sized,
B1: SampleBorrow<Self::X>,
B2: SampleBorrow<Self::X>,
Sample a single value uniformly from a range with inclusive lower bound
and exclusive upper bound [low, high). Read more
sourcefn sample_single_inclusive<R, B1, B2>(low: B1, high: B2, rng: &mut R) -> Self::X where
R: Rng + ?Sized,
B1: SampleBorrow<Self::X>,
B2: SampleBorrow<Self::X>,
fn sample_single_inclusive<R, B1, B2>(low: B1, high: B2, rng: &mut R) -> Self::X where
R: Rng + ?Sized,
B1: SampleBorrow<Self::X>,
B2: SampleBorrow<Self::X>,
Sample a single value uniformly from a range with inclusive lower bound
and inclusive upper bound [low, high]. Read more
impl Copy for UniformChar
Auto Trait Implementations
impl RefUnwindSafe for UniformChar
impl Send for UniformChar
impl Sync for UniformChar
impl Unpin for UniformChar
impl UnwindSafe for UniformChar
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Downcast for T where
T: Any,
impl<T> Downcast for T where
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more
fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s. Read more
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s. Read more
impl<A> DynCastExt for A
impl<A> DynCastExt for A
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
Use this to cast from one trait object type to another. Read more
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
Use this to upcast a trait to one of its supertraits. Read more
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
Use this to cast from one trait object type to another. With this method the type parameter is a config type that uniquely specifies which cast should be preformed. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
sourcefn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output; where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output; where
S: Into<Dispatch>,
T: Future, type Output = <T as Future>::Output;
Attaches the provided Subscriber to this type, returning a
WithDispatch wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
fn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
Attaches the current default Subscriber to this type, returning a
WithDispatch wrapper. Read more