Struct otter_api_tests::imports::nix::sys::wait::WaitPidFlag [−]
pub struct WaitPidFlag { /* fields omitted */ }
Implementations
impl WaitPidFlag
impl WaitPidFlag
pub const WNOHANG: WaitPidFlag
pub const WUNTRACED: WaitPidFlag
pub const WEXITED: WaitPidFlag
pub const WCONTINUED: WaitPidFlag
pub const WSTOPPED: WaitPidFlag
pub const WNOWAIT: WaitPidFlag
pub const WNOWAIT: WaitPidFlag
Don’t reap, just poll status.
pub const __WNOTHREAD: WaitPidFlag
pub const __WNOTHREAD: WaitPidFlag
Don’t wait on children of other threads in this group
pub const __WALL: WaitPidFlag
pub const __WALL: WaitPidFlag
Wait on all children, regardless of type
pub const __WCLONE: WaitPidFlag
pub const fn empty() -> WaitPidFlag
pub const fn empty() -> WaitPidFlag
Returns an empty set of flags
pub const fn all() -> WaitPidFlag
pub const fn all() -> WaitPidFlag
Returns the set containing all flags.
pub fn from_bits(bits: i32) -> Option<WaitPidFlag>
pub fn from_bits(bits: i32) -> Option<WaitPidFlag>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: i32) -> WaitPidFlag
pub const fn from_bits_truncate(bits: i32) -> WaitPidFlag
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: i32) -> WaitPidFlag
pub const unsafe fn from_bits_unchecked(bits: i32) -> WaitPidFlag
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn intersects(&self, other: WaitPidFlag) -> bool
pub const fn intersects(&self, other: WaitPidFlag) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: WaitPidFlag) -> bool
pub const fn contains(&self, other: WaitPidFlag) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: WaitPidFlag)
pub fn insert(&mut self, other: WaitPidFlag)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: WaitPidFlag)
pub fn remove(&mut self, other: WaitPidFlag)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: WaitPidFlag)
pub fn toggle(&mut self, other: WaitPidFlag)
Toggles the specified flags in-place.
pub fn set(&mut self, other: WaitPidFlag, value: bool)
pub fn set(&mut self, other: WaitPidFlag, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Binary for WaitPidFlag
impl Binary for WaitPidFlag
impl BitAnd<WaitPidFlag> for WaitPidFlag
impl BitAnd<WaitPidFlag> for WaitPidFlag
pub fn bitand(self, other: WaitPidFlag) -> WaitPidFlag
pub fn bitand(self, other: WaitPidFlag) -> WaitPidFlag
Returns the intersection between the two sets of flags.
type Output = WaitPidFlag
type Output = WaitPidFlag
The resulting type after applying the &
operator.
impl BitAndAssign<WaitPidFlag> for WaitPidFlag
impl BitAndAssign<WaitPidFlag> for WaitPidFlag
pub fn bitand_assign(&mut self, other: WaitPidFlag)
pub fn bitand_assign(&mut self, other: WaitPidFlag)
Disables all flags disabled in the set.
impl BitOr<WaitPidFlag> for WaitPidFlag
impl BitOr<WaitPidFlag> for WaitPidFlag
pub fn bitor(self, other: WaitPidFlag) -> WaitPidFlag
pub fn bitor(self, other: WaitPidFlag) -> WaitPidFlag
Returns the union of the two sets of flags.
type Output = WaitPidFlag
type Output = WaitPidFlag
The resulting type after applying the |
operator.
impl BitOrAssign<WaitPidFlag> for WaitPidFlag
impl BitOrAssign<WaitPidFlag> for WaitPidFlag
pub fn bitor_assign(&mut self, other: WaitPidFlag)
pub fn bitor_assign(&mut self, other: WaitPidFlag)
Adds the set of flags.
impl BitXor<WaitPidFlag> for WaitPidFlag
impl BitXor<WaitPidFlag> for WaitPidFlag
pub fn bitxor(self, other: WaitPidFlag) -> WaitPidFlag
pub fn bitxor(self, other: WaitPidFlag) -> WaitPidFlag
Returns the left flags, but with all the right flags toggled.
type Output = WaitPidFlag
type Output = WaitPidFlag
The resulting type after applying the ^
operator.
impl BitXorAssign<WaitPidFlag> for WaitPidFlag
impl BitXorAssign<WaitPidFlag> for WaitPidFlag
pub fn bitxor_assign(&mut self, other: WaitPidFlag)
pub fn bitxor_assign(&mut self, other: WaitPidFlag)
Toggles the set of flags.
impl Clone for WaitPidFlag
impl Clone for WaitPidFlag
pub fn clone(&self) -> WaitPidFlag
pub fn clone(&self) -> WaitPidFlag
Returns a copy of the value. Read more
Performs copy-assignment from source
. Read more
impl Debug for WaitPidFlag
impl Debug for WaitPidFlag
impl Extend<WaitPidFlag> for WaitPidFlag
impl Extend<WaitPidFlag> for WaitPidFlag
pub fn extend<T>(&mut self, iterator: T) where
T: IntoIterator<Item = WaitPidFlag>,
pub fn extend<T>(&mut self, iterator: T) where
T: IntoIterator<Item = WaitPidFlag>,
Extends a collection with the contents of an iterator. Read more
extend_one
)Extends a collection with exactly one element.
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
impl FromIterator<WaitPidFlag> for WaitPidFlag
impl FromIterator<WaitPidFlag> for WaitPidFlag
pub fn from_iter<T>(iterator: T) -> WaitPidFlag where
T: IntoIterator<Item = WaitPidFlag>,
pub fn from_iter<T>(iterator: T) -> WaitPidFlag where
T: IntoIterator<Item = WaitPidFlag>,
Creates a value from an iterator. Read more
impl Hash for WaitPidFlag
impl Hash for WaitPidFlag
impl LowerHex for WaitPidFlag
impl LowerHex for WaitPidFlag
impl Not for WaitPidFlag
impl Not for WaitPidFlag
pub fn not(self) -> WaitPidFlag
pub fn not(self) -> WaitPidFlag
Returns the complement of this set of flags.
type Output = WaitPidFlag
type Output = WaitPidFlag
The resulting type after applying the !
operator.
impl Octal for WaitPidFlag
impl Octal for WaitPidFlag
impl Ord for WaitPidFlag
impl Ord for WaitPidFlag
pub fn cmp(&self, other: &WaitPidFlag) -> Ordering
pub fn cmp(&self, other: &WaitPidFlag) -> Ordering
Compares and returns the maximum of two values. Read more
Compares and returns the minimum of two values. Read more
impl PartialEq<WaitPidFlag> for WaitPidFlag
impl PartialEq<WaitPidFlag> for WaitPidFlag
pub fn eq(&self, other: &WaitPidFlag) -> bool
pub fn eq(&self, other: &WaitPidFlag) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
pub fn ne(&self, other: &WaitPidFlag) -> bool
pub fn ne(&self, other: &WaitPidFlag) -> bool
This method tests for !=
.
impl PartialOrd<WaitPidFlag> for WaitPidFlag
impl PartialOrd<WaitPidFlag> for WaitPidFlag
pub fn partial_cmp(&self, other: &WaitPidFlag) -> Option<Ordering>
pub fn partial_cmp(&self, other: &WaitPidFlag) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
This method tests less than (for self
and other
) and is used by the <
operator. Read more
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
impl Sub<WaitPidFlag> for WaitPidFlag
impl Sub<WaitPidFlag> for WaitPidFlag
pub fn sub(self, other: WaitPidFlag) -> WaitPidFlag
pub fn sub(self, other: WaitPidFlag) -> WaitPidFlag
Returns the set difference of the two sets of flags.
type Output = WaitPidFlag
type Output = WaitPidFlag
The resulting type after applying the -
operator.
impl SubAssign<WaitPidFlag> for WaitPidFlag
impl SubAssign<WaitPidFlag> for WaitPidFlag
pub fn sub_assign(&mut self, other: WaitPidFlag)
pub fn sub_assign(&mut self, other: WaitPidFlag)
Disables all flags enabled in the set.
impl UpperHex for WaitPidFlag
impl UpperHex for WaitPidFlag
impl Copy for WaitPidFlag
impl Eq for WaitPidFlag
impl StructuralEq for WaitPidFlag
impl StructuralPartialEq for WaitPidFlag
Auto Trait Implementations
impl RefUnwindSafe for WaitPidFlag
impl Send for WaitPidFlag
impl Sync for WaitPidFlag
impl Unpin for WaitPidFlag
impl UnwindSafe for WaitPidFlag
Blanket Implementations
Mutably borrows from an owned value. Read more
pub fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<R, Global>
impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<I, A> Iterator for Box<I, A> where
A: Allocator,
I: Iterator + ?Sized, type Item = <I as Iterator>::Item;impl<F, A> Future for Box<F, A> where
A: Allocator + 'static,
F: Future + Unpin + ?Sized, type Output = <F as Future>::Output;
pub fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<R, Global>
impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<I, A> Iterator for Box<I, A> where
A: Allocator,
I: Iterator + ?Sized, type Item = <I as Iterator>::Item;impl<F, A> Future for Box<F, A> where
A: Allocator + 'static,
F: Future + Unpin + ?Sized, type Output = <F as Future>::Output;
Convert Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read more
pub fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
pub fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read more
Convert &Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read more
pub fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
pub fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read more
impl<A> DynCastExt for A
impl<A> DynCastExt for A
pub fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
T: ?Sized,
A: DynCastExtHelper<T>,
pub fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
T: ?Sized,
A: DynCastExtHelper<T>,
Use this to cast from one trait object type to another. Read more
pub fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
T: ?Sized,
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
pub fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
T: ?Sized,
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
Use this to upcast a trait to one of its supertraits. Read more
pub fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
T: ?Sized,
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
pub fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
T: ?Sized,
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
pub fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
pub fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
Use this to cast from one trait object type to another. With this method the type parameter is a config type that uniquely specifies which cast should be preformed. Read more
Compare self to key
and return true
if they are equal.
fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>
impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
[src]
fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>
impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
[src]Instruments this type with the provided Span
, returning an
Instrumented
wrapper. Read more
fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>
impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
[src]
fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>
impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
[src]pub fn vzip(self) -> V