Enum otter_api_tests::imports::env_logger::fmt::Color[−]

#[non_exhaustive]
pub enum Color {
    Black,
    Blue,
    Green,
    Red,
    Cyan,
    Magenta,
    Yellow,
    White,
    Ansi256(u8),
    Rgb(u8, u8, u8),
}

Expand description

The set of available colors for the terminal foreground/background.

The Ansi256 and Rgb colors will only output the correct codes when paired with the Ansi WriteColor implementation.

The Ansi256 and Rgb color types are not supported when writing colors on Windows using the console. If they are used on Windows, then they are silently ignored and no colors will be emitted.

This set may expand over time.

This type has a FromStr impl that can parse colors from their human readable form. The format is as follows:

Any of the explicitly listed colors in English. They are matched case insensitively.
A single 8-bit integer, in either decimal or hexadecimal format.
A triple of 8-bit integers separated by a comma, where each integer is in decimal or hexadecimal format.

Hexadecimal numbers are written with a 0x prefix.

Variants (Non-exhaustive)

This enum is marked as non-exhaustive

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

Black

Blue

Green

Red

Cyan

Magenta

Yellow

White

Ansi256(u8)

Rgb(u8, u8, u8)

Trait Implementations

impl Clone for Color

pub fn clone(&self) -> Color

Returns a copy of the value. Read more

fn clone_from(&mut self, source: &Self)1.0.0 [src]

Performs copy-assignment from source. Read more

impl Debug for Color

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl PartialEq<Color> for Color

pub fn eq(&self, other: &Color) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

pub fn ne(&self, other: &Color) -> bool

This method tests for !=.

impl Eq for Color

impl StructuralEq for Color

impl StructuralPartialEq for Color

Auto Trait Implementations

impl RefUnwindSafe for Color

impl Send for Color

impl Sync for Color

impl Unpin for Color

impl UnwindSafe for Color

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized,

[src]

pub fn type_id(&self) -> TypeId[src]

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T where
    T: ?Sized,

[src]

pub fn borrow(&self) -> &T[src]

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T where
    T: ?Sized,

[src]

pub fn borrow_mut(&mut self) -> &mut T[src]

Mutably borrows from an owned value. Read more

impl<T> DebugExt<T> for T where
    T: Debug,

pub fn to_debug(&self) -> String

impl<T> Downcast for T where
    T: Any,

pub fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<R, Global>
impl<R> Read for Box<R, Global> where
    R: Read + ?Sized, impl<W> Write for Box<W, Global> where
    W: Write + ?Sized, impl<I, A> Iterator for Box<I, A> where
    A: Allocator,
    I: Iterator + ?Sized,     type Item = <I as Iterator>::Item;impl<F, A> Future for Box<F, A> where
    A: Allocator + 'static,
    F: Future + Unpin + ?Sized,     type Output = <F as Future>::Output;

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more

pub fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more

pub fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s. Read more

pub fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s. Read more

impl<T> DowncastSync for T where
    T: Any + Send + Sync,

pub fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + 'static + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait. Read more

impl<A> DynCastExt for A

pub fn dyn_cast<T>(
    self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
    T: ?Sized,
    A: DynCastExtHelper<T>,

Use this to cast from one trait object type to another. Read more

pub fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
    T: ?Sized,
    A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,

Use this to upcast a trait to one of its supertraits. Read more

pub fn dyn_cast_adv<F, T>(
    self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
    T: ?Sized,
    A: DynCastExtAdvHelper<F, T>,
    F: ?Sized,

Use this to cast from one trait object type to another. This method is more customizable than the dyn_cast method. Here you can also specify the “source” trait from which the cast is defined. This can for example allow using casts from a supertrait of the current trait object. Read more

pub fn dyn_cast_with_config<C>(
    self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
    C: DynCastConfig,
    A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,

Use this to cast from one trait object type to another. With this method the type parameter is a config type that uniquely specifies which cast should be preformed. Read more

impl<Q, K> Equivalent<K> for Q where
    K: Borrow<Q> + ?Sized,
    Q: Eq + ?Sized,

[src]

pub fn equivalent(&self, key: &K) -> bool[src]

Compare self to key and return true if they are equal.

impl<T> From<T> for T[src]

pub fn from(t: T) -> T[src]

Performs the conversion.

impl<T> Instrument for T[src]

fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>
impl<T> Future for Instrumented<T> where
    T: Future,     type Output = <T as Future>::Output;

[src]

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>
impl<T> Future for Instrumented<T> where
    T: Future,     type Output = <T as Future>::Output;

[src]

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T where
    U: From<T>,

[src]

pub fn into(self) -> U[src]

Performs the conversion.

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T> ToOwned for T where
    T: Clone,

[src]

type Owned = T

The resulting type after obtaining ownership.

pub fn to_owned(&self) -> T[src]

Creates owned data from borrowed data, usually by cloning. Read more

pub fn clone_into(&self, target: &mut T)[src]

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T where
    U: Into<T>,

[src]

type Error = Infallible

The type returned in the event of a conversion error.

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

Performs the conversion.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>,

[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

Performs the conversion.

impl<V, T> VZip<V> for T where
    V: MultiLane<T>,

pub fn vzip(self) -> V