[−]Struct nucleo_f042k6::stm32::usart1::cr1::W
Value to write to the register
Methods
impl W
impl W
pub fn reset_value() -> W |
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W |
Writes raw bits to the register
pub fn ue(&mut self) -> _UEW |
Bit 0 - USART enable
pub fn uesm(&mut self) -> _UESMW |
Bit 1 - USART enable in Stop mode
pub fn re(&mut self) -> _REW |
Bit 2 - Receiver enable
pub fn te(&mut self) -> _TEW |
Bit 3 - Transmitter enable
pub fn idleie(&mut self) -> _IDLEIEW |
Bit 4 - IDLE interrupt enable
pub fn rxneie(&mut self) -> _RXNEIEW |
Bit 5 - RXNE interrupt enable
pub fn tcie(&mut self) -> _TCIEW |
Bit 6 - Transmission complete interrupt enable
pub fn txeie(&mut self) -> _TXEIEW |
Bit 7 - interrupt enable
pub fn peie(&mut self) -> _PEIEW |
Bit 8 - PE interrupt enable
pub fn ps(&mut self) -> _PSW |
Bit 9 - Parity selection
pub fn pce(&mut self) -> _PCEW |
Bit 10 - Parity control enable
pub fn wake(&mut self) -> _WAKEW |
Bit 11 - Receiver wakeup method
pub fn m0(&mut self) -> _M0W |
Bit 12 - Word length
pub fn mme(&mut self) -> _MMEW |
Bit 13 - Mute mode enable
pub fn cmie(&mut self) -> _CMIEW |
Bit 14 - Character match interrupt enable
pub fn over8(&mut self) -> _OVER8W |
Bit 15 - Oversampling mode
pub fn dedt(&mut self) -> _DEDTW |
Bits 16:20 - Driver Enable deassertion time
pub fn deat(&mut self) -> _DEATW |
Bits 21:25 - Driver Enable assertion time
pub fn rtoie(&mut self) -> _RTOIEW |
Bit 26 - Receiver timeout interrupt enable
pub fn eobie(&mut self) -> _EOBIEW |
Bit 27 - End of Block interrupt enable
pub fn m1(&mut self) -> _M1W |
Bit 28 - Word length
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |