Struct nrf52840::radio::RegisterBlock[][src]

#[repr(C)]
pub struct RegisterBlock { pub tasks_txen: TASKS_TXEN, pub tasks_rxen: TASKS_RXEN, pub tasks_start: TASKS_START, pub tasks_stop: TASKS_STOP, pub tasks_disable: TASKS_DISABLE, pub tasks_rssistart: TASKS_RSSISTART, pub tasks_rssistop: TASKS_RSSISTOP, pub tasks_bcstart: TASKS_BCSTART, pub tasks_bcstop: TASKS_BCSTOP, pub tasks_edstart: TASKS_EDSTART, pub tasks_edstop: TASKS_EDSTOP, pub tasks_ccastart: TASKS_CCASTART, pub tasks_ccastop: TASKS_CCASTOP, pub events_ready: EVENTS_READY, pub events_address: EVENTS_ADDRESS, pub events_payload: EVENTS_PAYLOAD, pub events_end: EVENTS_END, pub events_disabled: EVENTS_DISABLED, pub events_devmatch: EVENTS_DEVMATCH, pub events_devmiss: EVENTS_DEVMISS, pub events_rssiend: EVENTS_RSSIEND, pub events_bcmatch: EVENTS_BCMATCH, pub events_crcok: EVENTS_CRCOK, pub events_crcerror: EVENTS_CRCERROR, pub events_framestart: EVENTS_FRAMESTART, pub events_edend: EVENTS_EDEND, pub events_edstopped: EVENTS_EDSTOPPED, pub events_ccaidle: EVENTS_CCAIDLE, pub events_ccabusy: EVENTS_CCABUSY, pub events_ccastopped: EVENTS_CCASTOPPED, pub events_rateboost: EVENTS_RATEBOOST, pub events_txready: EVENTS_TXREADY, pub events_rxready: EVENTS_RXREADY, pub events_mhrmatch: EVENTS_MHRMATCH, pub events_phyend: EVENTS_PHYEND, pub shorts: SHORTS, pub intenset: INTENSET, pub intenclr: INTENCLR, pub crcstatus: CRCSTATUS, pub rxmatch: RXMATCH, pub rxcrc: RXCRC, pub dai: DAI, pub pdustat: PDUSTAT, pub packetptr: PACKETPTR, pub frequency: FREQUENCY, pub txpower: TXPOWER, pub mode: MODE, pub pcnf0: PCNF0, pub pcnf1: PCNF1, pub base0: BASE0, pub base1: BASE1, pub prefix0: PREFIX0, pub prefix1: PREFIX1, pub txaddress: TXADDRESS, pub rxaddresses: RXADDRESSES, pub crccnf: CRCCNF, pub crcpoly: CRCPOLY, pub crcinit: CRCINIT, pub tifs: TIFS, pub rssisample: RSSISAMPLE, pub state: STATE, pub datawhiteiv: DATAWHITEIV, pub bcc: BCC, pub dab: [DAB; 8], pub dap: [DAP; 8], pub dacnf: DACNF, pub mhrmatchconf: MHRMATCHCONF, pub mhrmatchmas: MHRMATCHMAS, pub modecnf0: MODECNF0, pub sfd: SFD, pub edcnt: EDCNT, pub edsample: EDSAMPLE, pub ccactrl: CCACTRL, pub power: POWER, // some fields omitted }

Register block

Fields

0x00 - Enable RADIO in TX mode

0x04 - Enable RADIO in RX mode

0x08 - Start RADIO

0x0c - Stop RADIO

0x10 - Disable RADIO

0x14 - Start the RSSI and take one single sample of the receive signal strength

0x18 - Stop the RSSI measurement

0x1c - Start the bit counter

0x20 - Stop the bit counter

0x24 - Start the energy detect measurement used in IEEE 802.15.4 mode

0x28 - Stop the energy detect measurement

0x2c - Start the clear channel assessment used in IEEE 802.15.4 mode

0x30 - Stop the clear channel assessment

0x100 - RADIO has ramped up and is ready to be started

0x104 - Address sent or received

0x108 - Packet payload sent or received

0x10c - Packet sent or received

0x110 - RADIO has been disabled

0x114 - A device address match occurred on the last received packet

0x118 - No device address match occurred on the last received packet

0x11c - Sampling of receive signal strength complete

0x128 - Bit counter reached bit count value

0x130 - Packet received with CRC ok

0x134 - Packet received with CRC error

0x138 - IEEE 802.15.4 length field received

0x13c - Sampling of energy detection complete. A new ED sample is ready for readout from the RADIO.EDSAMPLE register.

0x140 - The sampling of energy detection has stopped

0x144 - Wireless medium in idle - clear to send

0x148 - Wireless medium busy - do not send

0x14c - The CCA has stopped

0x150 - Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.

0x154 - RADIO has ramped up and is ready to be started TX path

0x158 - RADIO has ramped up and is ready to be started RX path

0x15c - MAC header match found

0x16c - Generated in Ble_LR125Kbit, Ble_LR500Kbit and BleIeee802154_250Kbit modes when last bit is sent on air.

0x200 - Shortcut register

0x304 - Enable interrupt

0x308 - Disable interrupt

0x400 - CRC status

0x408 - Received address

0x40c - CRC field of previously received packet

0x410 - Device address match index

0x414 - Payload status

0x504 - Packet pointer

0x508 - Frequency

0x50c - Output power

0x510 - Data rate and modulation

0x514 - Packet configuration register 0

0x518 - Packet configuration register 1

0x51c - Base address 0

0x520 - Base address 1

0x524 - Prefixes bytes for logical addresses 0-3

0x528 - Prefixes bytes for logical addresses 4-7

0x52c - Transmit address select

0x530 - Receive address select

0x534 - CRC configuration

0x538 - CRC polynomial

0x53c - CRC initial value

0x544 - Interframe spacing in us

0x548 - RSSI sample

0x550 - Current radio state

0x554 - Data whitening initial value

0x560 - Bit counter compare

0x600 - Description collection[n]: Device address base segment n

0x620 - Description collection[n]: Device address prefix n

0x640 - Device address match configuration

0x644 - Search pattern configuration

0x648 - Pattern mask

0x650 - Radio mode configuration register 0

0x660 - IEEE 802.15.4 start of frame delimiter

0x664 - IEEE 802.15.4 energy detect loop count

0x668 - IEEE 802.15.4 energy detect level

0x66c - IEEE 802.15.4 clear channel assessment control

0xffc - Peripheral power control

Auto Trait Implementations